Development of Improved High-Performance Liquid Chromatography Method for the Determination of Residual Caprylic Acid in Formulations of Human Immunoglobulins

Quality control of human immunoglobulin formulations produced by caprylic acid precipitation necessitates a simple, rapid, and accurate method for determination of residual caprylic acid. A high-performance liquid chromatography method for that purpose was developed and validated. The method involves depletion of immunoglobulins, the major interfering components that produce high background noise, by precipitation with acetonitrile (1:1, v/v). Chromatographic analysis of caprylic acid, preserved in supernatant with no loss, was performed using a reverse-phase C18 column (2.1 × 150 mm, 3 μm) as a stationary phase and water with 0.05% TFA–acetonitrile (50:50, v/v) as a mobile phase at a flow rate of 0.2 mL/min and run time of 10 min. The developed method was successfully validated according to the ICH guidelines. The validation parameters confirmed that method was linear, accurate, precise, specific, and able to provide excellent separation of peaks corresponding to caprylic acid and the fraction of remaining immunoglobulins. Furthermore, a 2⁴⁻¹ fractional factorial design was applied in order to test the robustness of developed method. As such, the method is highly suitable for the quantification of residual caprylic acid in formulations of human immunoglobulins for therapeutic use, as demonstrated on samples produced by fractionation of convalescent anti-SARS-CoV-2 human plasma at a laboratory scale. The obtained results confirmed that the method is convenient for routine quality control.     

Comparison of Volatile Organic Compounds of Sideritis romana L. and Sideritis montana L. from Croatia

A study on the headspace volatile organic compounds (VOCs) profile of native populations of Sideritis romana L. and Sidertis montana L., Lamiaceae, from Croatia is reported herein, to elucidate the phytochemical composition of taxa from this plant genus, well-known for traditional use in countries of the Mediterranean and the Balkan region. Headspace solid-phase microextraction (HS-SPME), using divinylbenzene/carboxene/polydimethylsiloxane (DVB/CAR/PDMS) or polydimethylsiloxane/divinylbenzene (PDMS/DVB) fiber, coupled with gas chromatography-mass spectrometry (GC-MS) was applied to analyze the dried aerial parts of six native populations in total. Furthermore, principal component analysis (PCA) was conducted on the volatile constituents with an average relative percentage ≥1.0% in at least one of the samples. Clear separation between the two species was obtained using both fiber types. The VOCs profile for all investigated populations was characterized by sesquiterpene hydrocarbons, followed by monoterpene hydrocarbons, except for one population of S. romana, in which monoterpene hydrocarbons predominated. To our knowledge, this is the first report on the VOCs composition of natural populations of S. romana and S. montana from Croatia as well as the first reported HS-SPME/GC-MS analysis of S. romana and S. montana worldwide.     

Chromatography,mass spectrometry,and molecular modeling studies on ammodytoxins

The ammodytoxins (Atxs) are neurotoxic phospholipases which occur in Vipera ammodytes ammodytes (Vaa) snake venom. There are three Atx isoforms, A, B, and C, which differ in only five amino acid positions at the C-terminus but differ substantially in their toxicity. The objective of this study was to establish an analytical method for unambiguous identification of all three isoforms and to use the method to assess a procedure for purification of the most toxic phospholipase, AtxA, from the venom. Isolation procedure for AtxA consisted of isolation of Atx-cross-reactive material (proteins recognized by anti-Atx antibodies), by use of an affinity column, then cation exchange on CIM (Convective Interaction Media) disks. The purification procedure was monitored by means of reversed-phase chromatography (RPC) and mass spectrometry (MS). Although previous cation exchange of the pure isoforms enabled separate elution of AtxA from B and C, separation of AtxA from Atxs mixture was not accomplished. RPC was not able to separate the Atx isoforms, whereas an MS based approach proved to be more powerful. Peptides resulting from tryptic digestion of Atxs which enable differentiation between the three isoforms were successfully detected and their sequences were confirmed by post-source decay (PSD) fragmentation. Separation of Atx isoforms by ion-exchange chromatography is most presumably prevented by Atxs heterodimer formation. The tendency of Atxs to form homodimers and heterodimers of similar stability was confirmed by molecular modeling.     

Combined X-ray diffraction and QM/MM study of the Burkholderia cepacia lipase-catalyzed secondary alcohol esterification

To understand the origin of high enantioselectivity of Burkholderia cepacia lipase (BCL) toward secondary alcohol, (R,S)-1-phenoxy-2-hydroxybutane (1), and its ester (E1), we determined the crystal structure of BCL complexed with phosphonate analogue of S-E1 and accomplished a series of MM, MC, and QM/MM studies. We have found that the inhibitor in the S configuration binds into the BCL active site in the same manner as the R isomer, with an important difference: while in case of the R-inhibitor the H-bond between its alcohol oxygen and catalytic His286 can be formed, in the case of the S-inhibitor this is not possible. Molecular modeling for both E1 enantiomers revealed orientations in which all hydrogen bonds characteristic of productive binding are formed. To check the possibility of chemical transformation, four different orientations of the substrate (two for each enantiomer) were chosen, and a series of ab initio QM/MM calculations were accomplished. Starting from the covalent complex, we modeled the ester (E1) hydrolysis and the alcohol (1) esterification. The calculations revealed that ester release is possible starting with all four covalent complexes. Alcohol release from the BCL-E1 complex in which the S-substrate is bound in the same manner as the S-inhibitor in the crystal structure however is not possible. These results show that the crystallographically determined binding modes should be taken with caution when modeling chemical reactions.     

Identification of proteins interacting with ammodytoxins in Vipera ammodytes ammodytes venom by immuno-affinity chromatography

In order to perform their function, proteins frequently interact with other proteins. Various methods are used to reveal protein interacting partners, and affinity chromatography is one of them. Snake venom is composed mostly of proteins, and various protein complexes in the venom have been found to exhibit higher toxicity levels than respective components separately. Complexes can modulate envenomation activity of a venom and/or potentiate its effect. Our previous data indicate that the most toxic components of the Vipera ammodytes ammodytes (Vaa) venom isolated so far—ammodytoxins (Atxs)—are contributing to the venom’s toxicity only moderately; therefore, we aimed to explore whether they have some interacting partner(s) potentiating toxicity. For screening of possible interactions, immuno-affinity chromatography combined with identification by mass spectrometry was used. Various chemistries (epoxy, carbonyldiimidazole, ethylenediamine) as well as protein G functionality were used to immobilize antibodies on monolith support, a Convective Interaction Media disk. Monoliths have been demonstrated to better suit the separation of large biomolecules. Using such approach, several proteins were indicated as potential Atx-binding proteins. Among these, the interaction of Atxs with a Kunitz-type inhibitor was confirmed by far-Western dot-blot and surface plasmon resonance measurement. It can be concluded that affinity chromatography on monolithic columns combined with mass spectrometry identification is a successful approach for screening of protein interactions and it resulted with detection of the interaction of Atx with Kunitz-type inhibitor in Vaa venom for the first time.     

Quantification of malondialdehyde by HPLC‐FL – application to various biological samples

Malondialdehyde (MDA) is stabile product of lipid peroxidation (LPO), and therefore MDA is frequently used as a biomarker of LPO. To determine MDA level in various biological samples (human plasma, fish liver tissue and cells in culture), we used an HPLC method with fluorescent detection based on 2‐thiobarbituric acid (TBA) assay. The method was validated by the use of spiked pooled plasma samples. In tested concentration range (0.15–3.0 µmol/L) the method was linear (R² = 0.9963), the between‐day variability (coefficient of variations, CVs) was between 4.7 and 7.6%, the within‐day variability CVs was between 2.6 and 6.4% and recovery was between 91.2 and 107.6%. The level of MDA in human plasma (healthy male, non‐smokers, 46.3 ± 4.7 years; N = 38) was 2.2 ± 1.4 µmol/L; that in liver tissue of common carp (Cyprinus carpio; N = 12) was 0.02 ± 0.004 µmol/g tissue, and in cultured cells (human laryngeal carcinoma cells; N = 10) it was 0.18 ± 0.02 nmol/mg proteins. The HPLC‐FL method is rapid, accurate and reliable to follow the extent of LPO in various biological samples, particularly in samples in which a low level of MDA is expected, such as cells in culture. Owing to the rapid analytical process and run time, it can be used for routine analysis of MDA in clinical laboratory. Copyright © 2014 John Wiley & Sons, Ltd.     

Influence of Cotton Cationization on Pigment Layer Characteristics in Digital Printing

The paper examines the influence of cotton cationization on the print quality in terms of penetration, colour yield and colour depth, which have been analysed in comparison to cotton untreated and pretreated with conventional acrylate binder. The process of cationization during mercerization was performed with a cationizing agent Rewin DWR (CHT Bezema). Standard (non-cationized) and cationized fabric, with and without additional layering of binder have been printed by digital inkjet pigment printing method. Moisture management testing (MMT) and dynamic contact angle measurement (drop shape analyzer–DSA30S) were performed on standard and cationized fabric, with and without binder, both with and without pigment layer. After printing, the objective values of colour depth (K/S) and colour parameters L*, C* and h° were analysed. The samples were also analysed by the method of microscopic imaging using a DinoLite microscope. Printed samples were tested to washing fastness, and the results are presented in terms of total colour difference (dECMC), according to CMC(l:c) equation, after the 1st, 3rd, 5th, 7th and 10th washing cycles. Results showed that the cotton cationization will improve the uniformity and coverage of the printed area as well as increase the K/S value. For the samples with binder, the positive effect of cationization on the stability and bond strength between the polymer layer as a pigment carrier with the cotton fabric was confirmed.     

Studying disulfide bond rearrangement by MALDI-RTOF PSD and MALDI-TOF/RTOF high-energy CID (20 keV) experiments of peptides derived from ammodytoxins

Ammodytoxins (Atxs) are presynaptically neurotoxic phospholipases present in Vipera ammodytes ammodytes snake venom. Atxs show a high sequence homology and contain 14 cysteines which form seven biologically relevant disulfide bridges-connecting non-neighboring cysteines. Formic acid cleavage was performed to confirm protein sequences by MALDI RTOF MS and resulted in 95.6% sequence coverage exhibiting only few formylations. Cysteine-containing peptides showed adjacent signals 2 and/or 4 Da lower (according to the number of cysteines present in the peptide) than the theoretical molecular weight indicating disulfide bridge rearrangement. Post-source decay (PSD) and high-energy collision-induced dissociation (CID) at 20 keV experiments showed fragmentation pattern unique for the reduced, thiol group containing and the oxidized, disulfide bridge harboring peptides. Besides typical low-energy fragment ions observed during PSD experiments (a-, b-, y-type ions), additional high-energy fragment ions (c-, x-, w-, d-type and internal fragments) of significant intensity were generated during fragmentation at 20 keV. In the case of charge directing N- and C-termini, x- and w-type ions were also observed during PSD. Good and up to complete sequence coverage was achieved for all studied peptides from Atxs in the case of high-energy CID, whereas PSD lacked information particularly for larger peptides.     

The electrochemical behavior of PtRu- and Pt-modified zeolite X in alkaline solution

Zeolite NaX was modified by Pt and Pt/Ru nanodispersed metallic clusters. The procedure of impregnation with acetylacetonate salt/acetone solution was applied. Scanning electron microscope analysis confirmed partial zeolite framework destruction. According to energy dispersive X-ray analysis, Pt/Ru ratio in sample was about 1. Electrochemical behavior of PtRu- and Pt-modified zeolites was investigated in alkaline solutions, 5 mM NaOH?+?1 M Na₂SO₄ and 0.1 M NaOH. The shape of cyclic voltammograms of 13XPtRu electrode, recorded in slightly alkaline solution, was greatly affected by the presence of hydrogen that remained in the sample after synthetic procedure. Oxygen reduction reaction (ORR) was investigated in an O₂-saturated aqueous 0.1-M NaOH solution. The obtained Tafel slopes indicated ORR mechanism that involves one-electron discharge-determining step. According to Koutecky–Levich slope, the oxygen reduction reaction followed 4e^? mechanism on both 13XPtRu and 13XPt electrode. The onset of ORR on 13XPtRu electrode was shifted toward more positive potentials in comparison to 13XPt electrode.