Enhancing signal-to-noise ratio and resolution in low-field NMR relaxation measurements using post-acquisition digital filters

The traditional way to enhance signal-to-noise ratio (SNR) of nuclear magnetic resonance (NMR) signals is to increase the number of scans. However, this procedure increases the measuring time that can be prohibitive for some applications. Therefore, we have tested the use of several post-acquisition digital filters to enhance SNR up to one order of magnitude in time domain NMR (TD-NMR) relaxation measurements. The procedures were studied using continuous wave free precession (CWFP-T₁) signals, acquired with very low flip angles that contain six times more noise than the Carr–Purcell–Meiboom–Gill (CPMG) signal of the same sample and experimental time. Linear (LI) and logarithmic (LO) data compression, low-pass infinity impulse response (LP), Savitzky–Golay (SG), and wavelet transform (WA) post-acquisition filters enhanced the SNR of the CWFP-T₁ signals by at least six times. The best filters were LO, SG, and WA that have high enhancement in SNR without significant distortions in the ILT relaxation distribution data. Therefore, it was demonstrated that these post-acquisition digital filters could be a useful way to denoise CWFP-T₁, as well as CPMG noisy signals, and consequently reducing the experimental time. It was also demonstrated that filtered CWFP-T₁ method has the potential to be a rapid and nondestructive method to measure fat content in beef and certainly in other meat samples.     

Probing the Catalytic Activity of Reduced Graphene Oxide Decorated with Au Nanoparticles Triggered by Visible Light

Hybrid materials in which reduced graphene oxide (rGO) is decorated with Au nanoparticles (rGO–Au NPs) were obtained by the in situ reduction of GO and AuCl₄^?_(aq) by ascorbic acid. On laser excitation, rGO could be oxidized as a result of the surface plasmon resonance (SPR) excitation in the Au NPs, which generates activated O₂ through the transfer of SPR‐excited hot electrons to O₂ molecules adsorbed from air. The SPR‐mediated catalytic oxidation of p‐aminothiophenol (PATP) to p,p′‐dimercaptoazobenzene (DMAB) was then employed as a model reaction to probe the effect of rGO as a support for Au NPs on their SPR‐mediated catalytic activities. The increased conversion of PATP to DMAB relative to individual Au NPs indicated that charge‐transfer processes from rGO to Au took place and contributed to improved SPR‐mediated activity. Since the transfer of electrons from Au to adsorbed O₂ molecules is the crucial step for PATP oxidation, in addition to the SPR‐excited hot electrons of Au NPs, the transfer of electrons from rGO to Au contributed to increasing the electron density of Au above the Fermi level and thus the Au‐to‐O₂ charge‐transfer process.     

Singlet versus triplet dynamics of β-carotene studied by quantum control spectroscopy

Biomolecules very often present complex energy deactivation networks with overlapping electronic absorption bands, making their study a difficult task. This can be especially true in transient absorption spectroscopy when signals from bleach, excited state absorption and stimulated emission contribute to the signal. However, quantum control spectroscopy can be used to discriminate specific electronic states of interest by applying specifically designed laser pulses. Recently, we have shown the control of energy flow in bacterial light-harvesting using shaped pump pulses in the visible and the selective population of pathways in carotenoids using an additional depletion pulse in the transient absorption technique. Here, we apply a closed-loop optimization approach to β-carotene using a spatial light modulator to decipher the energy flow network after a multiphoton excitation with a shaped ultrashort pulse in the near-IR. After excitation, two overlapping bands were detected and identified as the S₁ state and the first triplet state T₁. Using the transient absorption signal at a specific probe delay as feedback, the triplet signal could be optimized over the singlet contribution.     

Synchrotron radiation total reflection X-ray fluorescence (SR-TXRF) for evaluation of food contamination

Summary The objective of this study was to use synchrotron radiation total reflection X-ray fluorescence analysis (SR-TXRF) for the determination of metals and other elements in food available to the population in commercial establishments, in order to evaluate the risks of contamination by these products. The analyzed species were vegetables, leafy vegetables, fruits, cereal and grain. The results indicated that some species were contaminated by Cr, Cu, Zn and Pb with concentrations much higher than the reference values.     

Thermally reversible light scattering films based on the melting/crystallization of organic crystals dispersed in an epoxy matrix

Films that can be reversibly switched from opaque to transparent states by varying temperature (TRLS films), have potential applications in thermal sensors, optical devices, recording media, etc. A dispersion of organic crystals in a thermoset may be used for these purposes provided that at temperatures higher than the melting point there is a matching of refractive indices of both phases. A model system consisting on a dispersion of diphenyl (DP) crystals in an epoxy matrix based on diglycidyl ether of bisphenol A and m-xylylenediamine, was analyzed as a possible TRLS film encapsulated between transparent covers to avoid sublimation of DP. To obtain a uniform dispersion of DP-rich domains in the epoxy matrix by polymerization-induced phase separation, it was necessary to add 5 wt% of polystyrene (PS) to the initial formulation. Phase separation induced by polymerization at 80 °C led to a dispersion of PS/DP domains in the epoxy matrix due to the low compatibility of PS with the epoxy and its high compatibility with DP. Crystallization and melting processes were confined to the interior of dispersed domains leading to an excellent reproducibility of the optical properties of TRLS films in the course of successive heating-cooling cycles.     

New designs for inhibitors of the NF-κB: DNA binding

We present a series of new inhibitors of the association between nuclear factor kappa B (NF-B) and the corresponding B site in DNA. They were designed using the lead compound 15-deoxy-^12,14 -prostaglandin J₂ (PGJ2), which is a natural product with demonstrated inhibitory efficiency for this system. First, the binding mode of PGJ2 to NF-B was unraveled by GOLD docking calculation. Subsequently, substitutions were made to PGJ2 to optimize its association with NF-B. Care was taken not to strongly increase the reactivity of the new compounds, and to keep the overall shape, size and hydrophilicity of the lead compound, which should render them a similar bioavailability. Molecular mechanics calculations were performed to decide on the suitability of the substitutions, and to evaluate the energies of association with NF-B. Density functional theory calculations were performed also to study the overall reactivity of the substituted drugs towards NF-B. Important general conclusions were obtained, concerning the improvement of these natural inhibitors; namely, a set of rational methodologies were deduced to improve the association between the PGJ2 derivatives and NF-B, and their efficiency demonstrated by generating a set of substituted complexes, some of them with a very much increased affinity for NF-B, opening new doors to enlarge the therapeutic capabilities of this class of drugs.     

Dinitrogen reduction by TmII,DyII, and NdII with simple amide and aryloxide ligands

Dinitrogen can be reduced to the planar M2(mu-eta2:eta2-N2) structure without employing cyclopentadienyl or complicated polydentate ligands using the recently discovered divalent oxidation states of Tm(II), Dy(II), and Nd(II). Complexes of these ions with common monodentate amide and aryloxide ligands can effect N2 reduction. THF solutions of LnI2 (Ln = Tm, Dy) in the presence of 2 equiv of NaN(SiMe3)2 reduce dinitrogen to form {[(Me3Si)2N]2(THF)Ln}2(mu-eta2:eta2-N2) complexes that have planar Ln2N2 units and 1.264(7) and 1.305(6) A NN bonds consistent with (N2)2- moieties. With the stronger reductant Nd(II), aryloxides are sufficient ancillary ligands: the NdI2/2KOC6H3tBu2-2,6 (KOAr) system forms [(ArO)2(THF)2Nd]2(mu-eta2:eta2-N2), which has a 1.242(7) A NN bond.     

Sensitive spectrophotometric determination of vanadium with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol after extraction with N-benzoyl-N-phenylhydroxylamine

A selective and precise spectrophotometric determination of vanadium(V) is performed after preceding extraction with N-benzoyl-N-phenylhydroxylamine (BPHA). The color is developed in a water-ethanol solution with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol (5-Cl-DMPAP). The molar absorptivity at 588 nm is (6.57 ± 0.05) × 10⁴ L mol^–1 cm^–1 at pH 2.1. The method permits the determination of vanadium (V) at trace levels in the presence of large amounts of other ions. It is applied to the determination of vanadium in aluminium (analytical reagent grade) and in human hair. High accuracy and precision is obtained.     

Liquid secondary ion mass spectrometry of porphyrin dimers: reduction reactions and structural characterisation

New synthesised porphyrin dimers, with an amide or ester linkage between the two porphyrin units, were studied using liquid secondary ion mass spectrometry (LSIMS). The formation of reduced species was observed for all the compounds and it was found that the extent of reduction is dependent on the matrix used and on the structure of the porphyrin dimer. The main fragmentation pathways lead to monomer fragments resulting from cleavage of the amide or ester linkage between the two porphyrin units. The consistency of the fragmentations for all the dimers studied leads to the proposal of a common designation for the fragment ions. LSIMS, in addition to molecular weight determination, can provide important structural information for this type of compound.     

Analysis of beers from Brazil with synchrotron radiation total reflection X-ray fluorescence

Summary In this study the concentrations of P, S, Cl, K, Ca, Mn, Fe, Zn and Br in twenty-nine brands of national and international beers were determined by synchrotron radiation total reflection X-ray fluorescence analysis (SR-TXRF). The results were compared with the limits established by the Brazilian legislation and the nutritional values established by National Agricultural Library (NAL, USA). The measurements were performed at the X-Ray Fluorescence Beamline at Brazilian National Synchrotron Light Laboratory, in Campinas, S?o Paulo, Brazil, using a polychromatic beam for excitation. A small volume of 5 ml of beers containing an internal standard used to correct geometry effects was analyzed without pretreatment. The measuring time was 100 seconds and the detection limits obtained varied from 1 mg ^. l^-1 for Mn and Fe to 15 mg ^. l^-1 for P.