SERS‐based detection of barcoded gold nanoparticle assemblies from within animal tissue

We have explored the potential of deep Raman spectroscopy, specifically surface‐enhanced spatially offset Raman spectroscopy (SESORS), for non‐invasive detection from within animal tissue, by employing SERS‐barcoded nanoparticle (NP) assemblies as the diagnostic agent. This concept has been experimentally verified in a clinically‐relevant backscattered Raman system with an excitation line of 785 nm under ex vivo conditions. We have shown that our SORS system, with a fixed offset of 2–3 mm, offered sensitive probing of injected 2‐quinolinethiol‐barcoded NP assemblies through animal tissue containing both protein and lipid. In comparison with that of non‐aggregated SERS‐barcoded gold NPs, we have demonstrated that the tailored SERS‐barcoded aggregated NP assemblies have significantly higher detection sensitivity. We report that these NP assemblies can be readily detected at depths of 7–8 mm from within animal proteinaceous tissue with high signal‐to‐noise ratio. In addition, they could also be detected from beneath 1–2 mm of animal tissue with high lipid content, which generally poses a challenge because of high absorption of lipids in the near‐infrared region. We have also shown that the signal intensity and signal‐to‐noise ratio at a particular depth is a function of the SERS tag concentration used and that our SORS system has a 2‐quinolinethiol detection limit of 10⁻⁶ M. Higher detection depths may possibly be obtained with optimization of the NP assemblies, along with improvements in the instrumentation. Such NP assemblies offer prospects for in vivo, non‐invasive detection of tumours along with scope for incorporation of drugs and their targeted and controlled release at tumour sites. These diagnostic agents combined with drug delivery systems could serve as a ‘theranostic agent’, an integration of diagnostics and therapeutics into a single platform. Copyright © 2013 John Wiley & Sons, Ltd.     

Polysiloxanes polymers with hyperbranched structure and multivinyl functionality

Hyperbranched polysiloxane polymers with multivinyl functionality were designed and synthesized through a “one‐step and one‐pot” deactivation enhanced atom transfer polymerization (DE‐ATRP) approach from the copolymerization of polydimethylsiloxane (PDMS) macromonomers and divinylbenzene (DVB). Various feed ratios of siloxane‐based monomer and divinyl monomers were investigated. We showed that even at DVB concentrations as high as 80 mol % in the feed, 65% yield of hyperbranched polymer could be obtained without gelation because the DE‐ATRP suppressed the rapid formation of macronetwork structures. The molecular weight, polydispersity, macromolecular structure of hyperbranched poly(DVB‐co‐PDMS) as well as its viscosity in silicone oil were characterized by GPC‐MALLS, ¹H NMR and rheometer. By tracking the relationship between the radius of gyration, elution volume and molecular weight from MALLS analysis, solid evidences of the highly branched and condensed structure of the polymers were obtained. Furthermore, the oil thickening experiments demonstrate that this hyperbranched polymer can act as a well‐controlled viscosity‐modifier for Silicone oils, which potentially will have important application in coating, cosmetic and pharmaceutical products. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel one pot synthesis of silver nanoparticle-polymer composites by supercritical CO2 polymerisation in the presence of a RAFT agent

We report the one pot synthesis of a silver-polymer nanocomposite in supercritical carbon dioxide (scCO(2)) whereby an organometallic silver complex is thermally decomposed in the presence of a reversible addition fragmentation chain transfer (RAFT) agent during a polymerisation reaction in which the RAFT agent simultaneously stabilises the growing polymer microparticles and the formation of surface located silver nanoparticles.     

One-pot synthesis of block copolymers in supercritical carbon dioxide: a simple versatile route to nanostructured microparticles

We present a one-pot synthesis for well-defined nanostructured polymeric microparticles formed from block copolymers that could easily be adapted to commercial scale. We have utilized reversible addition-fragmentation chain transfer (RAFT) polymerization to prepare block copolymers in a dispersion polymerization in supercritical carbon dioxide, an efficient process which uses no additional solvents and hence is environmentally acceptable. We demonstrate that a wide range of monomer types, including methacrylates, acrylamides, and styrenics, can be utilized leading to block copolymer materials that are amphiphilic (e.g., poly(methyl methacrylate)-b-poly(N,N-dimethylacrylamide)) and/or mechanically diverse (e.g., poly(methyl methacrylate)-b-poly(N,N-dimethylaminoethylmethacrylate)). Interrogation of the internal structure of the microparticles reveals an array of nanoscale morphologies, including multilayered, curved cylindrical, and spherical domains. Surprisingly, control can also be exerted by changing the chemical nature of the constituent blocks and it is clear that selective CO(2) sorption must strongly influence the block copolymer phase behavior, resulting in kinetically trapped morphologies that are different from those conventionally observed for block copolymer thin films formed in absence of CO(2).     

New Structure Formation on γ-irradiation of Poly(chlorotrifluoroethylene)

The radiation chemistry of PCTFE at different temperatures has been studied. The polymer was irradiated under vacuum to absorbed doses of up to 1500 kGy. Three irradiation temperatures were chosen. These included ambient temperature, a temperature well above the T_g and a temperature above the crystalline melting temperature. These were 298, 423 and 493 K, respectively. The formation of new structures was identified by solid-state FTIR and ¹⁹F NMR. No branching was observed below the melting temperature, but branches were observed above the melting temperature. G-values for chain-end formation were 1.5 and 2.4 at room temperature and 423 K, respectively and the G-value for the formation of double bonds was found to be <0.1. For the irradiations at 493 K, the G-values for the formation of chain ends, double bonds and branching points were 3.6, 0.2 and 0.5, respectively. The presence of long-chain branches within the polymer structure could not be proven for radiolysis at 493 K, but scission predominates and network formation does not occur upon irradiation. DSC studies of the polymers irradiated at ambient temperature were consistent with chain scission leading to an increase in the percentage crystallinity, as observed for other fluoropolymers.     

Successful dispersion polymerization in supercritical CO2 using polyvinylalkylate hydrocarbon surfactants synthesized and anchored via RAFT

New CO2-philic hydrocarbon molecules were synthesized by reversible addition fragmentation chain-transfer polymerization. These poly(vinyl alkylates) show the highest solubility in supercritical CO2 of any hydrocarbon reported to date. By utilizing the anchoring ability of the thiocarbonylthio end group, the dispersion polymerization of N-vinyl pyrrolidone was successfully achieved in scCO2 leading to high yields of well-defined spherical polymer particles.     

Hyperbranched polymers as delivery vectors for oligonucleotides

We report on the synthesis and characterization of hyperbranched dimethylaminoethyl methacrylate (DMAEMA) polymers using reversible addition fragmentation chain transfer polymerization. These polymers are unimolecular and globular and hence interact differently with DNA than conventional DMAEMA or block copolymers. The polymers were shown to effectively bind and condense oligonucleotides (ODNs); visualization of the bound complexes was achieved using atomic force microscopy, whereas isothermal titration calorimetry described the thermodynamics of binding. The ODNs were effectively protected from enzymatic degradation (DNAses) when condensed by all the polycations studied. However, internalization of the complexes into HeLa cells was less effective when the polycation was chain extended with polyethyleneglycol monomethylether methacrylate. Conjugation of folic acid to the periphery of the polycation facilitated much enhanced uptake of the oligomeric DNA into the HeLa cells due to overexpression of folate receptors on the surface of HeLa cells. Although significant cytotoxicity was observed at high polymer concentrations, this could be alleviated by shielding of the polycation using poly(ethyleneglycol monomethylether methacrylate). These results suggest that hyperbranched polymers formed in this way exhibit interesting complexation behavior with ODNs and thus are promising models to study as gene delivery vectors. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Supercritical CO2: an effective medium for the chemo-enzymatic synthesis of block copolymers?

In this review, we describe the combination of enzymatic polymerisation and controlled free radical polymerisation in supercritical carbon dioxide. This combination facilitates the preparation of a range of block and graft copolymers, some of which cannot easily be obtained by conventional polymer synthesis. Biocatalysis in polymer science provides significant new opportunities and will open up a very broad range of new polymeric materials.     

Influence of compatibilizing agent molecular structure on the mechanical properties of phosphate glass fiber‐reinforced PLA composites

Eight compatibilizing agents were studied to investigate their effect on the quality of the interface between a phosphate glass fiber and a poly(lactic acid) (PLA) matrix. After application of the agents via dip‐coating, the fibers were Soxhlet extracted to remove any unreacted compatibilizer. To assess the interface quality, single fiber tensile tests of treated fibers and interfacial shear strengths (IFSS) of single fiber composites (SFC) were assessed. Of the agents tested, Glycerol‐2‐phosphate disodium pentahydrate (GP) and low molecular weight PLA with a sodium salt terminal group (PLA‐Na) showed the highest IFSS values, which were significantly higher than those of the control. Oligomeric PLA with a carboxylic acid end group and alendronate sodium trihydrate also showed an improvement over the control fibers. The hydrolytic degradation of these single fiber composites was studied over 7 days in water at 37 °C and a significant decrease in IFSS was observed in all cases, with the treated samples dropping to the level of the control. TGA and XPS analysis of the sized fibers showed that GP and PLA‐Na had been applied successfully to the fiber surface. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3082–3094, 2010