Characterization of high-temperature superconductors by electron microprobe analysis

In order to optimize the physical properties of HTSC small single crystals grown from a melt for basic studies of their physical properties the influence of the environment on their impurity content was investigated by EPMA. This requires quantitative analysis of all elements being present in the crystals. The accuracy of results was affected by problems with the choice and quality of standards, by contamination but also by malfunction of microprobe electronics. The HTSC materials were found to react with mills, milling balls, crucibles and the atmosphere. These problems are being discussed and some reactions being studied for Y₁Ba₂Cu₃O_6+x (0 < x < 1) HTSC in A1₂O₃ and ZrO₂ crucibles. The crystals grown contain reproducible amounts of impurities depending on boundary conditions and exhibit a zone structure in composition particularly for Y and Ba within their range of homogeneity.     

Use of solid-phase microextraction-capillary-gas chromatography (SPME-CGC) for the varietal characterization of wines by means of chemometrical methods

The extraction of wine aroma compounds was studied by direct-SPME (DI/SPME), headspace-SPME (HS/SPME) and multiple-headspace-extraction-SPME (MHE/SPME). The aromagrams obtained by HS/SPME-CGC were evaluated with chemometrical methods for the varietal classification of wines. Received: 25 July 1997 / Revised: 24 September 1997 / Accepted: 7 October 1997     

Microstructure and electrical properties of BaTiO<Subscript>3</Subscript> and (Ba,Sr)TiO<Subscript>3</Subscript> ferroelectric thin films on nickel electrodes

Nickel thin films have been sputtered on standard Si/SiO₂ substrates with TiO₂ as an adhesive layer. The thermal stability of these substrates was analyzed. SEM images show an increase in grain size with annealing temperature. They were found to be stable till 800°C, beyond which the nickel layer disintegrated. These substrates were used for deposition of BaTiO₃ and (Ba,Sr)TiO₃ dielectric thin films under a reducing atmosphere. The dielectric thin films were processed with various pyrolysis and annealing temperatures in order to optimize the dielectric properties. Increased pyrolysis temperatures showed an increase in the grain size. Results on these nickelised substrates were finally compared with dielectric films deposited on platinized silicon substrates under identical conditions but crystallized in an oxygen atmosphere.     

Theoretical investigations of Fe porphyrins. V. Low-lying electronic states of bisammineporphinatoiron(III)

Ab initio CI calculations are reported on the lowest doublet, quartet, and sextet states of [Fe^III(P)(NH₃)₂]⁺. The low-spin ground state is calculated as (d_xy² (d_π)³ with d_xy(d_π)⁴ higher by 0.15 eV. The near-ir bands at ～1 eV observed in low-spin ferriheme proteins are attributed to (π → d_π) transitions. The lowest high-spin state is ⁶A_1g, and the near-ir transitions of the high-spin ferriheme proteins observed at ～1.2 eV are attributed to higher ⁶[tripsextet] excited states [i.e., ring triplet, metal sextet]. The 30-ps “triplet” transient populated with low quantum yield observed in laser-flash studies on Fe^III(TPP)CI [TPP = tetrapbenylporphyrin] may be an ¹[tripsextet] state.     

Rhodopsin exhibits a preference for solvation by polyunsaturated docosohexaenoic acid

An all-atom molecular dynamics simulation of rhodopsin in a membrane environment has been carried out with lipid composition similar to that of the retinal membrane. The initial conformation of the protein was taken from the X-ray crystallographic structure (1F88), while those of the lipids came from a previous molecular dynamics simulation. During the course of the 12.5 ns simulation, the initially randomly placed lipids adopt an anisotropic solvation structure around the protein. The lipids, having one saturated stearic acid chain and one polyunsaturated docosohexaenoic acid chain with a zwitterionic phosphatidylcholine headgroup, arrange themselves to maximize contact between the polyunsaturated chain and the protein surface. This organization is driven by energetically favorable interactions between the transmembrance helices and the docosohexaenoyl chains that are largely of the van der Waals type. These observations are consistent with various experimental studies on rhodopsin and other G-protein coupled receptors and with the picture of extreme flexibility in polyunsaturated fatty acid chains that has arisen from recent NMR and computational work.     

Synthese und Charakterisierung funktionalisierter β‐Hydroxydithiozimtsäuren und deren Ester. Komplexchemisches Verhalten gegenüber Nickel(II), Palladium(II) und Platin(II)

Synthesis and Analytical Characterization of Functionalized β‐Hydroxydithiocinnamic Acids and their Esters. Complex Chemistry towards Nickel(II), Palladium(II), and Platin(II) Starting from silyl‐protected 4‐hydroxy acetophenone ( 1 ) the 1,1‐ethenedihiolato complexes 3 – 5 were synthesised using carbon disulfide and potassium‐tert‐butylate as a base. After being deprotected, the resulting 4‐hydroxy‐substituted complexes 6 – 8 were esterified with DL‐α‐lipoic acid to obtain the compounds 9 – 11 . The resulting complexes were characterized using NMR spectroscopy, mass spectrometry and IR spectroscopy. 3‐substituted β‐hydroxydithiocinnamic acid methyl ester ( 12 ) was obtained via an analogous path of reaction using silyl‐protected 3‐hydroxy acetophenone ( 2 ), carbon disulfide and methyl iodide. After removing of the silyl group the resulting hydroxy group was esterified with DL‐α‐lipoic acid. Using the dithioacid ester 14 as a ligand the Ni^II ( 15 ), Pd^II ( 16 ) and Pt^II ( 17 ) [O,S] complexes were obtained.     

Crystallization Temperature Limit of (Ba,Sr)TiO<Subscript>3</Subscript> Thin Films Prepared by a Non Oxocarbonate Phase Forming CSD Route

A new chemical solution deposition (CSD) route for the fabrication of Ba_0.7Sr_0.3TiO₃ (BST) thin films has been developed which completely prevents the formation of an intermediate oxo-carbonate phase. The latter has been reported previously by several authors to be responsible for increased crystallization temperatures. Barium and strontium diaminoethoxides were synthesized starting from pure barium and strontium metal and aminoethanol. These alkoxides were found to be readily soluble in a wide range of solvents and thus were excellent candidates for the CSD process. To prepare a stable precursor solution the aminoalkoxides were dissolved in 2-butoxyethanol and then used for the deposition of BST thin films. We conclude that the minimum crystallization temperature of 600C to be independent of the formation of the oxo-carbonate phase. DTA-TGA were performed on the precursors and their solutions to study their decomposition behaviour. All films annealed at different temperatures were physically characterized by XRD, IR, and SEM. The films prepared by this route at 650C were found to have high dielectric constant and the leakage currents were comparable to BST films prepared by normal carboxylate based routes at 750C.     

Mechanisch-chemische Reaktionen in künstlichen organischen Fasern

Zusammenfassung Die beim Verstrecken sowie Mahlen von künstlichen organischen Fasermaterialien (Polyester-, Polyamid- und Viskosefasern) als Folge homolytischer Kettenspaltungen auftretende Freiradikalbildung wurde untersucht.

---

Mechanochemical reactions in synthetic organic fibres

The formation of free radicals due to homolytic chain fission occurring in the course of stretching and grinding of synthetic organic fibres (polyester, polyamide, and viscose fibres) has been investigated by means of ESR spectroscopy.

---

---

Mit 3 Abbildungen

---

Die Elektronspinresonanz-Messungen wurden im Chemischen Institut der Sir George Williams University, Montreal, Canada, durchgeführt.     

Simple technique for the simultaneous determination of solvent diffusion coefficient in polymer by Quantum Resistive Sensors and FT‐IR spectroscopy

A simple, quick and novel method for the determination of diffusion properties through polymer films, based on Quantum Resistive Sensors made of Conductive Polymer nanoComposites is presented. The integral time lag method is employed for the calculation of diffusion coefficient, and the results are compared simultaneously with that of Fourier transform infrared spectroscopy and sorption method. Two model polymers, a semi‐crystalline poly(lactic acid) and an amorphous poly(isobutylene‐co‐isoprene), are used to validate the study. A good correlation is established between the diffusion coefficient values derived from all techniques demonstrating the interest of such reliable, simple and cheap nanosensors for the quick determination (several minutes) of diffusion properties in polymer films. Our first results suggest that this technique is meaningful for the determination of barrier properties in nanocomposite membranes filled with platelets of graphene or clay. Copyright © 2013 John Wiley & Sons, Ltd.