Laser induced air breakdown using 0.355, 0.532, and 1.06 µm radiation

Studies of breakdown threshold intensity for air at various pressures in the range of 24–760 torr using 0.355, 0.532 and 1.06 μm radiation are reported. We observep ^−0.8 scaling ofI _th at 1.06 μm and a weak scaling ofp ^−0.4 at 0.532 and 0.355 μm radiation. Strong dependence of breakdown spot size on laser power but weak dependence on air pressure is observed.     

Carbon thin films through laser ablation

Thin carbon films were deposited on silicon substrates at room temperature using a 0.355 μm Nd:YAG laser wavelength at low irradiance in the presence of argon gas. Various techniques including scanning electron microscopy, X-ray diffraction and Raman spectroscopy were used to analyze the film quality. The influence of the argon gas pressure on the properties of the films is demonstrated and a correlation with the optical emission data is presented.     

Laser induced breakdown of Ar,N2 and O2 gases using 1.064, 0.532, 0.355 and 0.266 μm radiation

An experimental investigation of laser-induced breakdown using Nd:YAG laser harmonics for argon, nitrogen and oxygen gases is reported. Pressure dependence as well as wavelength dependence of the breakdown threshold irradianceI _th is investigated. The experimental observations for 1.064 and 0.532 m laser wavelengths are in agreement with theoretical calculations which include the effects of multiphoton ionization and cascade ionization.     

Design and pharmacophoric identification of flavonoid scaffold-based aromatase inhibitors

Aromatase is a crucial enzyme for the catalysis of aromatization reaction at the last and rate-limiting step involved in the conversion of androgenic substrates to an estrogenic substrate. A hormone-dependent breast cancer in postmenopausal woman can be cured by inhibition of estrogen biosynthesis by the help of aromatase inhibitors (AIs). The mode of interactions of flavonones with the active site of aromatase has been studied in search of potent and selective AIs as a substitute of the natural steroidal ligand. Structure-based computational approach namely, molecular docking simulations were performed to investigate the structural features of the docked complex of aromatase and flavonoid ligands. A nonsteroidal flavonoid pharmacophore showing electrostatic and steric features for selective binding within the main pocket of the catalytic active site of aromatase has been identified as an outcome of the study. The binding affinity of quercetin and isoflavone were predicted within aromatase. Isoflavone was used as a negative control to compare its binding affinities with the selected dataset. The predicted binding affinity of negative control isoflavone was in accordance with its in vitro AI efficacy. Isoflavone showed poor binding affinity and ranked last in terms of MolDock score (−86.309 kcal/molÅ) compared to dataset molecules. The generated pharmacophoric information will be helpful for the synthetic chemist to design and synthesize selective AIs with comparable binding affinity to the natural steroidal ligand.     

Hyperfine structure and isotope shift studies of rhenium by laser optogalvanic spectroscopy

Doppler-limited high resolution laser optogalvanic spectra of six transitions of rhenium lying in the range 560–620 nm have been recorded. Isotope shifts between the two natural isotopes of rhenium,¹⁸⁵Re and¹⁸⁷Re, have been calculated in all the six transitions. Hyperfine coupling constants for eight levels belonging to the configurations 5d ⁵6s ², 5d ⁶6s, 5d ⁴6s ²6p and 5d ⁵6s6p are reported. Wherever possible our constants are compared with those given by others.     

Laser produced plasma: A pumping source for cadmium photo-ionization laser

We report laser oscillations in Cd II on 4d ⁹5s ^{2 2} D _5/2 − 4d ¹⁰5p ² P _3/2 transition at 441.6 nm using laser produced tungsten plasma as a pumping source. Mach Zehnder interferometer is used to measure electron density. Design and working of the crossed heat pipe used in the studies is discussed.     

A point implicit unstructured grid solver for the euler and Navier–Stokes equations

An upwind finite element technique that uses cell-centred quantities and implicit and/or explicit time marching has been developed for computing hypersonic laminar viscous flows using adaptive triangular grids. The approach is an extension to unstructured grids of the LAURA algorithm due to Gnoffo. A structured grid of quadrilaterals is laid out near a solid surface. For inviscid flows the method is stable at Courant numbers of over 100000. A first-order basic scheme and a higher-order flux-corrected transport (FCT) scheme have been implemented. This technique has been applied to the problem of predicting type III and IV shock wave interactions on a cylinder, with a view to simulating the pressure and heating rate augmentation caused by an impinging shock on the leading edge of a cowl lip of an engine inlet. The predictions of wall pressure and heating rates compare very well with experimental data. The flow features are distinctly captured with a sequence of adaptively generated grids.     

Ground state C2 density measurement in carbon plume using laser-induced fluorescence spectroscopy

The temporal evolution and spatial distribution of C₂ molecules produced by laser ablation of a graphite target is studied using optical emission spectroscopy, dynamic imaging and laser-induced fluorescence (LIF) investigations. We observe peculiar bifurcation of carbon plume into two parts; stationary component close to the target surface and a component moving away from the target surface which splits further in two parts as the plume expands. The two distinct plumes are attributed to recombination of carbon species and formation of nanoparticles. The molecular carbon C₂ moves with a faster velocity and dies out at ~ 800 ns whereas the clusters of nanoparticle move with a slower velocity due to their higher mass and can be observed even after 1600 ns. C₂ molecules in the d³Π_g state were probed for laser-induced fluorescence during ablation of graphite using the Swan (0,0) band at 516.5 nm. The fluorescence spectrum and images of fluorescence d³Π_g − a³Π_u(0,1)(λ = 563.5 nm) are recorded using a spectrograph attached to the ICCD camera. To get absolute ground state C₂ density from fluorescence images, the images are calibrated using complimentary absorption experiment. This study qualitatively helps to get optimum conditions for nanoparticle formation using the laser ablation of graphite target and hence deducing optimum conditions for thin film deposition.     

Interfacially active particles in droplet/matrix blends of model immiscible homopolymers: Particles can increase or decrease drop size

Particles have been shown to adsorb at the interface between immiscible homopolymer melts and to affect the morphology of blends of those homopolymers. We examined the effect of such interfacially active particles on the morphology of droplet/matrix blends of model immiscible homopolymers. Experiments were conducted on blends of polydimethylsiloxane and 1,4-polyisoprene blended in either a 20:80 or 80:20 weight ratio. The effects of three different particle types, fluoropolymer particles, iron particles, and iron oxyhydroxide particles, all at a loading of 0.5 vol.%, were examined by rheology and by direct flow visualization. Particles were found to significantly affect the strain recovery behavior of polymer blends, increasing or decreasing the ultimate recovery, slowing down or accelerating the recovery kinetics, and changing the dependence of these parameters on the applied stress prior to cessation of shear. These rheological observations were found to correlate reasonably well with particle-induced changes in drop size. The particles can both increase as well as decrease the drop size, depending on the particle type, as well as on which phase is continuous. The cases in which particles cause a decrease in drop size are analogous to the particle stabilization of “Pickering emulsions” well-known from the literature on oil/water systems. We hypothesize that cases in which particles increase drop size are analogous to the “bridging–dewetting” mechanism known in the aqueous foam literature.     

Instabilities in laser-produced carbon plasma expanding in a nonuniform magnetic field

The laser-produced carbon plasma expanding in an ambient atmosphere in the presence of an inhomogeneous magnetic field has been studied by emission spectroscopy and fast photography. A double-peak structure is observed in the temporal profile of CII and CIII transition. A sudden increase in delay observed in the second peak when the plasma expands in the concave region of a magnetic field is attributed to Rayleigh–Taylor instability in a magnetic field. An estimate of the growth rate of the instability inferred using intensity and velocity profile of the expanding plasma is reported. Received: 26 August 1999 / Revised version: 3 January 2000 / Published online: 20 September 2000