Synthesis and micellar properties of surface-active ionic liquids: 1-alkyl-3-methylimidazolium chlorides

A series of surface-active ionic liquids, RMeImCl, has been synthesized by the reaction of purified 1-methylimidazole and 1-chloroalkanes, RCl, R=C(10),C(12),C(14), and C(16), respectively. Adsorption and aggregation of these surfactants in water have been studied by surface tension measurement. Additionally, solution conductivity, electromotive force, fluorescence quenching of micelle-solubilized pyrene, and static light scattering have been employed to investigate micelle formation. The following changes resulted from an increase in the length of R: an increase of micelle aggregation number; a decrease of: minimum area/surfactant molecule at solution/air interface; critical micelle concentration, and degree of counter-ion dissociation. Theoretically-calculated aggregation numbers and those based on quenching of pyrene are in good agreement. Gibbs free energies of adsorption at solution/air interface, DeltaG(ads)(0), and micelle formation in water, DeltaG(mic)(0), were calculated, and compared to those of three surfactant series, alkylpyridinium chlorides, RPyCl, alkylbenzyldimethylammonium chlorides, RBzMe(2)Cl, and benzyl(3-acylaminoethyl)dimethylammonium chlorides, R(')AEtBzMe(2)Cl, respectively. Contributions to the above-mentioned Gibbs free energies from surfactant methylene groups (in the hydrophobic tail) and the head-group were calculated. For RMeImCl, the former energy is similar to that of other cationic surfactants. The corresponding free energy contribution of the head-group to DeltaG(mic)(0) showed the following order: RPyCl approximately RBzMe(2)Cl>RMeImCl>R(')AEtBzMe(2)Cl. The head-groups of the first two surfactant series are more hydrophobic than the imidazolium ring of RMeImCl, this should favor their aggregation. Micellization of RMeImCl, however, is driven by a relatively strong hydrogen-bonding between the chloride ion and the hydrogens in the imidazolium ring, in particular the relatively acidic H2. This interaction more than compensates for the relative hydrophilic character of the diazolium ring. As indicated by the corresponding DeltaG(mic)(0), micellization of R(')AEtBzMe(2)Cl is more favorable than that of RMeImCl because the CONH group of the former surfactant series forms hydrogen bonds to both the counter-ion and the neighboring molecules in the micelle.     

Chitosan loaded with silver nanoparticles,CS‐AgNPs,using thymus syriacus,wild mint,and rosemary essential oil extracts as reducing and capping agents

The present study describes the green method for the preparation of chitosan loaded with silver nanoparticles (CS‐AgNPs) in the presence of 3 different extracted essential oils. The essential oils play dual roles as reductant and capping agents. The reducing power and DPPH (2,2‐diphenyl‐1‐picrylhydrazyl) assay for the 3 essential oils—Thymus syriacus (T), wild mint (M), and rosemary (R)—have been reported. The preparation of CS‐AgNPs was performed by 2 steps. The 3 previously extracted essential oils have been used as reducing and capping agent in the first step, while in the second step, silver nanoparticles were integrated in chitosan. The integration of AgNPs in the structure of chitosan was confirmed by ultraviolet‐visible, Fourier transform infrared spectroscopy, scanning electron microscopy techniques, and energy dispersive X‐ray. Surface plasmon resonance confirmed the formation of CS‐AgNPs with maximum absorbance at λ_max between 405 ‐ 410 and 410 ‐ 430 nm for colloidal and films of CS‐AgNPs, respectively. The intensity of bands at 3408 cm^?1 in the fourier transform infrared spectroscopy measurements was decreased substantially and shifted slightly to lower frequency (?υ = 43 cm^?1). Scanning electron microscopy shows a spherical morphology of AgNPs with size of 62 nm for both colloidal and film samples, and energy dispersive X‐ray analysis shows peaks confirming AgNPs formation.     

Reactions of 4-alkylidene (arylidene)-1-phenylpyrazolidine-3,5-dione

Reactions of 4-alkylidene(arylidene)-1-phenylpyrazolidine-3,5-dione with oxidizing (chromium trioxide/acetic acid) as well as with reducing (sodium borohydride/methanol) agents were carried out. Phenylhydrazine reacted with 4-arylidene-1-phenylpyrazolidine-3,5-diones via fission of exo C=C bond to give 1-phenylpyrazolidine-3,5-dione and the corresponding aryl hydrazones. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1335–1341, September, 2007.     

Optimization of free space optics parameters: An optimum solution for bad weather conditions

Free Space Optics Systems (FSO) is one of the most effective solutions, especially for atmospheric turbulence due to the weather and environment structure. Free space optics system suffers from various limitations. A well-known disadvantage of FSO is its sensitivity on local weather conditions-primarily to haze and rain, resulting in substantial loss of optical signal power over the communication path. The main objective of this article is to evaluate the quality of data transmission using Wavelength Division Multiplexing (WDM) with highlighting several factors that will affect the quality of data transmission. The results of these analyses are to develop a system of quality-free space optics for a high data rate transmission. From the result analysis, FSO wavelength with 1550 nm produces less effect in atmospheric attenuation. Short link range between the transmitter and receiver can optimize the FSO system transmission parameters or components. Based on the analysis, it is recommended to develop an FSO system of 2.5 Gbps with 1550 nm wavelength and link range up to 150 km at the clear weather condition of bit-error-rate (BER) 10⁻⁹.     

Novel syntheses of some new 3,4-dihydrospiro{benzimidazo[1,2-a]pyridine-3,3′-indolin}-2′-one derivatives

Abstract  

2-Methylbenzimidazole 1 reacted with 3-dicyanomethylidine-1-ethyl-2-oxoindoline 2 in ethyl acetate to afford 1-amino-2-cyano-3,4-dihydro-1′-ethylspiro{benzimidazo[1,2-a]pyridine-3,3′-indolin}-2′-one 6, which was used as a key intermediate in the synthesis of fused spiropolyheterocyclic derivatives of benzimidazopyridopyrimidine and/or benzimidazonaphthyridine nucleus incorporating an indoline moiety.     

Synthesis,characterization, and evaluation of polymeric oil sorbent for remediation of hydrocarbons spillage

The preparation and evaluation of polymeric oil sorbent based on styrene acrylate ester and ethylhexyl acrylate (EHA) are the main target of this work. In this respect, poly styrene-co-p-chloromethyl styrene (PSCMS) was synthesized through radical copolymerization of p-CMS with styrene in the presence of benzoyl peroxide initiator. Then, the PSCMS was reacted with acrylic acid to produce macromonomer containing polymerizable C?C poly {styrene-co-[4-(methyl acrylate) styrene]} (PSSMA) that subsequently copolymerized with EHA in the presence of a cross-linker to obtain the cross-linked copolymers PSSMA/EHA (organogel). The prepared compounds were characterized by using FTIR, ¹H NMR, and gel permeation chromatography. The thermal properties of the cross-linked oil absorbents were investigated using thermogravimetric analysis, and the morphology was characterized by scanning electron microscope (SEM). The oil absorbency of oil gel was determined through oil absorption tests; the highest oil absorbencies of oil gel were found to be 82.6, 74.4, 46.7, and 38.1 g/g in N,N-dimethyl formamide, CHCl₃, toluene, and diesel, respectively.     

Effect of Interfacially Active Fractions of Some Egyptian Crude Oils on Their Emulsion Stability

Four samples from different crude oils were used for this study: light and heavy crude oils from Iran and two crude oils from Egypt, namely, Ras Gharb and Suez mix. The asphaltenes were separated from these crude oils and then the maltene (non‐asphaltenic fraction) was fractionated into waxes, aromatics, and resins. All fractions were characterized using FTIR and UV spectroscopic analyses in addition to gel permeation chromatograph (GPC). These fractions were tested for their emulsion stability. For chemometric analysis different parameters (variables) have been used to study the effect of different fractions (objects) on the emulsion stability. Such variables included the integrated areas under the stretching absorption peaks of CH in the range of 3000–2800 cm^?1, C?O in the range of 1750–1650 cm^?1, and the aromatic C?C in the range of 1650–1550 cm^?1, as well as UV absorption value at 235 nm and average molecular weight (MW). Principal component analysis (PCA) and multiple linear regression (MLR) were conducted for examining the relationship between multiple variables and the stability of water‐in‐crude oil emulsions. The results of PCA explain the interrelationships between the observations and variables in multivariate data. The correlation coefficients between different parameters derived from PCA reveals that the UV absorption value and MW are strongly correlated with emulsion stability. It also reveals that the resins, asphaltenes, and maltene have better emulsion stability than waxes and lower molecular weight aromatics. The linear relationship between the parameters and the stability of water‐in‐crude oil emulsions using MLR was modeled according to the better statistical results. The obtained mathematical model can be used to predict the stability of water‐in‐crude oil emulsions from the chemical groups and functionalities in each crude oil fraction.     

Synthesis of Oil Spill Sorbents Based on Cellulose Derivatives

In this work, hydroxypropyl cellulose (HPC) was used to synthesize hydroxypropylcellulose acrylate (HPCA) macromonomer by esterification of HPC with acryloyl chloride in homogenous solution of DMF. Then the produced HPCA monomer was copolymerized with ethylhexyl acrylate (EHA) in presence of two types of crosslinkers to produce oil gel. Several parameters were considered, namely, monomers feed ratio, type and concentration of the applied crosslinkers. The chemical structures of both HPC and HPCA were confirmed by using FTIR and ¹H NMR spectroscopic analyses. Also, the thermal properties of the crosslinked oil absorbents were investigated by using TGA. Furthermore, morphological propoeries of these crosslinked sorbers were studied through SEM and their swelling efficiency was thoroughly investigated in heavy and light oil.     

A New Algorithm for Development of Dynamic Cyclic Shift Code for Spectral Amplitude Coding Optical Code Division Multiple Access Systems

Abstract

This article presents a new code—the dynamic cyclic shift code—for spectral amplitude coding–optical code division multiple access systems. One of the important properties of the dynamic cyclic shift code is that the number of users can be increased without increasing the weight value. System performance was evaluated by using both theoretical analysis as well as the simulation experiment. The analysis results show that the proposed dynamic cyclic shift code can support more users in spectral amplitude coding–optical code division multiple access systems compared to spectral amplitude coding–optical code division multiple access codes. It was ascertained by performance evaluation that the dynamic cyclic shift code possesses ideal properties for use in spectral amplitude coding–optical code division multiple access systems.     

Novel syntheses of some new 3,4-dihydrospiro{benzimidazo[1,2-<Emphasis Type="Italic">a</Emphasis>]pyridine-3,3′-indolin}-2′-one derivatives

Abstract  2-Methylbenzimidazole 1 reacted with 3-dicyanomethylidine-1-ethyl-2-oxoindoline 2 in ethyl acetate to afford 1-amino-2-cyano-3,4-dihydro-1′-ethylspiro{benzimidazo[1,2-a]pyridine-3,3′-indolin}-2′-one 6, which was used as a key intermediate in the synthesis of fused spiropolyheterocyclic derivatives of benzimidazopyridopyrimidine and/or benzimidazonaphthyridine nucleus incorporating an indoline moiety. Graphical abstract