Strained layer quantum well semiconductor optical amplifiers: Polarization insensitive amplification

Polarization insensitive optical amplification was demonstrated in newly developed semiconductor optical amplifiers that have strained GalnAsP quantum well structures. We tailored the active region of the quaternary strained layer quantum well structure with a small biaxially tensile strain of 0.2% in the well layers for polarization insensitive operation.     

Stability analysis of abnormal multiplication of plankton using parameter identification technique

This paper presents the mathematical approach for the abnormal multiplication of plankton. An abnormal multiplication can be expressed as an unstable problem and the stability of the system is investigated by introducing eigenvalues of a mathematical equation. The stability of the system can be judged by an eigenvalue based on the Lyapunov's stability theory. In this paper, the Arnoldi‐QR method is used to obtain eigenvalues and eigenvectors of the system. The mode superposition method is employed to create spatial distribution needed to analyse the stability. To obtain the objective eigenvalue, the parameter identification technique is employed. The finite element method is used for the discretization in space. Lake Kasumigaura, which is located in Ibaraki Prefecture in Japan, is selected and actual data in 1975, 1976, 1991 and 2000 are used in order to investigate the stability of the specified lake in Japan. Copyright © 2004 John Wiley & Sons, Ltd.     

Significance of anti-HBc IgM in acute hepatitis and hepatitis B associated chronic liver disease

To determine the diagnostic value of anti-HBc IgM in acute viral hepatitis or chronic liver disease B, Anti-HBc IgM was measured by a RIA and an ELISA in 32 patients with acute hepatitis (4 with type A, 15 with type B and 13 with type non A non B), 18 patients with chronic hepatitis and 19 patients with liver cirrhosis. In acute hepatitis B, anti-HBc IgM (both RIA and ELISA) was positive in 14(93%) of 15 patients and its cut-off index value was very high. However, anti-HBc IgM was always negative in one patient with typical course of type B. In 1 of 4 patients with acute hepatitis A and 2 of 13 with non A non B, anti-HBc IgM (RIA and/or ELISA) was positive. These 3 patients were positive for anti-HBs at the onset of disease, so we could not made the diagnosis of acute hepatitis B. Anti-HBc IgM was positive in 21(51%) of 37 patients with HBsAg-positive chronic liver disease by RIA and in 11 (30%) by ELISA, and its cut-off index value was relatively low. These results suggest that when adequate cut-off index value is established, anti-HBc analysis is useful for differentiating recent and current infections from remote infections.     

A Large-Area Patterned TiO2/SnO2 Bilayer Type Photocatalyst Prepared by Gravure Printing

Anatase TiO₂ films (thickness = 50 nm) were formed in shape of stripes (width = 1.6 mm, interval = 0.4 mm) by gravure printing on commercially available SnO₂ coated soda-lime glass substrates (dimension = 300 × 300 mm). Its photocatalytic activity was examined for the gas-phase oxidation of CH₃CHO in comparison with a simple TiO₂ photocatalyst formed on a silica glass. The patterned TiO₂/SnO₂ bilayer type photocatalyst showed a high photocatalytic activity in an H₂O bearing atmosphere. On the other hand, neither the patterning nor stacking effect was observed for the same reaction under dry conditions. These results could be explained in terms of the reducing potential of the electrons in the conduction band of the SnO₂ layer.     

On the selection of the optimal plasticizer for calix[n]arene-based ion-selective electrodes: Possible correlation between the ion selectivity and the ‘softness’ of the plasticizer

A criterion for the selection of a suitable plasticizer for calix[n]arene-based ion-selective electrodes is discussed. The cation selectivity of plasticized membranes without the ligand was first measured as a reference. The membranes can be roughly classified into two groups. The first group shows cation selectivity in the order Cs⁺+>K⁺>Na⁺>Li⁺. The membranes in the second group are made of phosphorus plasticizers, which show a selectivity in the reverse order. The plasticizers in the first group featured a linear relationship between the dipole moment of the plasticizer (calculated by a PM3 method) and the ratio of cesium selectivity to lithium selectivity. The linear relationship supports the view that the polar membrane which includes a soft plasticizer with a large dipole moment shows selectivity for Cs⁺, whereas the nonpolar membrane including the soft plasticizer with the small dipole moment shows much lower selectivity for Cs⁺. Next, 2-fluorphenyl-2-nitrophenyl ether (FPNPE) which showed the highest Cs⁺ selectivity and tris(2-ethylhexyl)phosphate (TEHP) which showed the highest Li⁺ selectivity were mixed in an appropriate ratio to make membranes with a different affinity for hard ions. The metal selectivities of several crown-based and calixarene-based ionophores were examined in these membranes. Although a few exceptions exist, the polar soft membrane is favorable when the interfering metal ion is hard, whereas the hard membrane is favorable when the interfering metal ion is soft.     

Chemical structure of poly(ethylene terephthalate)–styrene and nylon–styrene graft copolymers prepared by radiation techniques

The graft copolymerizations of styrene onto poly(ethylene terephthalate) (PET) and nylon fibers were carried out by the mutual irradiation and preirradiation methods. True graft copolymers were isolated from the products by extraction and characterized by hydrolysis and osmometry. Among the swelling agents employed, methanol was most effective for increasing the extent of grafting onto PET. In both methods of the grafting, the molecular weight of polystyrene formed in the substrate matrix was higher than one million if no chain-transfer agent was added to the monomer solution. Similar to the case of radiation grafting onto poly(vinyl alcohol) and cellulose, the isolated graft copolymer carried only one branch per copolymer molecule in both cases. Of great interest is the particularly low extent of grafting in the case of PET–styrene. This should be attributed to the low sensitivity of PET to radiation. The grafting site on the mother polymer molecule is discussed on the basis of the solution behavior of the branch polymers separated from the backbone.     

Photophysical properties of oligo(2,3-thienyleneethynylene)s

Photophysical properties of oligo(2,3-thienyleneethynylene)s (nTE, n denotes the number of thiophene rings, n = 2, 3) in benzene were investigated using steady-state, time-resolved fluorescence, and transient absorption spectroscopies. For 2TE, generation of the radiative S2 and nonradiative S1 states was confirmed. Upon excitation, the S2 state was initially generated and deactivated to the S1 state within 10 ps. The S1 state exhibited the transient absorption band at 470 nm, of which the lifetime was estimated to be 5.3 ns. In the case of 3TE, on the other hand, it was revealed that the radiative S1 state with a transient absorption peak at 650 nm was generated upon excitation. The T1 states of nTE were generated from the S1 states. The quantum yields were estimated to be 0.52 and 0.54 for 2TE and 3TE, respectively. Extremely fast reactions in the higher triplet excited state were indicated for both 2TE and 3TE.     

Kinetics of transient end-to-end contact of single-stranded DNAs

The formation of the pyrene (Py) dimer radical cation (Py(2)(*+)) was used to measure the kinetics of the intrastrand end-to-end contact rates of single-stranded DNAs (ssDNAs) in the 10 nanoseconds to the tens of microseconds time range. ssDNAs labeled with Py at both ends with the lengths of 3, 6, and 9 mer were synthesized, and the two-photon ionization method was employed to generate a Py(*+), which enables the measurements of the end-to-end contact rates from 10 ns. The formation rate of Py(2)(*+) depended on the length and the sequence of the ssDNAs, and about 1 order of magnitude faster rates were observed for the T-rich ssDNAs compared to those for the corresponding length of A-rich ssDNAs, showing that ssDNA made from adenines is much more rigid than that composed of thymidines. As for the T-rich ssDNAs, the formation of Py(2)(*+) attributed to the misfolded structures was also observed, which is consistent with the configurational diffusion model suggested by Ansari and co-workers.     

Effect of TRX-liposomes size on their prolonged circulation in rats

Newly formulated cationic liposomes (TRX-liposomes) with four different mean diameters were injected into twelve male rats via the lateral tail vein in order to evaluate the effect of liposomal size on pharmacokinetic parameters. TRX-liposomes disappeared from the blood according to the one-compartment model and demonstrated maximum and minimum half-lives of ca. 14 h (mean diameter of 114.3 nm) and ca. 5 h (mean diameter of 285.9 nm), respectively. This prolonged half-life tended to decrease at the boundary of 114.3 nm mean diameter. The optimal size (114.3 nm) for prolonged circulation of TRX-liposomes was consistent with that of pegylated liposomes such as Doxil((R)), however, the half-life was different among these liposomes. The electric charge of the TRX-liposomal surface is assumed to be responsible for this difference. The results of the present study will be very useful in the design of long-circulating cationic liposomes.