Enantiospecific synthesis of isomers of AES, a new environmentally friendly chelating agent

Three four-step enantiospecific syntheses of different diastereomers of AES, a new biodegradable chelating agent, are described. The stereocenters in each of the isomers are accessible from l- and d-malic and aspartic acids.     

Alnumycins A2 and A3: new inverse-epimeric pairs stereoisomeric to alnumycin A1

Two new pairs of stereoisomeric alnumycin As, A2 {(2)-(1R,1′RS,4′SR,5′SR)} and A3 {(2)-(1R,1′RS,4′SR,5′RS)}, are described. Similar to alnumycin A1 {(2)-(1R,1′RS,4′RS,5′SR)}, each of these naturally occurring compounds is also a pair of C-1 inverse epimers. The relative configurations of the dioxane ring sidechains were assigned on the basis of ¹H NMR NOE contacts and molecular modeling using density functional theory (DFT) at the M06-2X/6-31G(d) level of theory. The absolute configurations of C-1 and the determination of inverse epimeric relationships were achieved by experimental electronic circular dichroism (ECD) measurements, with both aspects confirmed by using the chiral derivatizing agent (CDA) Mosher′s acid chloride {α-methoxy-α-trifluorophenylacetyl chloride (MTPACl)} to effect enantiodifferentiation. The absolute configurations of the dioxane ring using the CDA could only be effected in the case of alnumycin A1, the results of which were in agreement with previous assignments. The dioxane ring conformational mobility and the likely interaction between the MTPA groups coupled with the structural novelty of the diols in the dioxane ring with respect to CDA analysis precluded an absolute configuration assignment for alnumycins A2 and A3 based on empirical comparisons or by computational analysis of through-space NMR shieldings (TSNMRS) emanating from the phenyl groups of the MTPA moieties.     

High‐molar‐mass polypropene with tunable elastic properties by hafnocene/borate catalysts

Elastic polypropene has gained growing industrial and academic interest as a thermoplastic elastomer. In this study, “rac”‐ and “meso”‐dimethylsilyl(3‐benzylindenyl)(2‐methylindenyl)hafnium dichloride complexes (Hfr and Hfm, respectively), activated with [NHMe₂Ph][B(C₆F₅)₄]/triisobutyl aluminum, were used in propene polymerization. Using these catalyst systems, we obtained polymers with high molar masses, up to 550 kg/mol, and moderate isotacticities between 34 and 52%. By varying the polymerization conditions, we could modify the polymer microstructure and molar mass. ¹³C NMR was used to calculate the polymer pentad sequence distributions. The crystalline parts of the polymers were analyzed with the differential scanning calorimetry successive self‐nucleation and annealing (SSA) technique. The SSA thermograms revealed that Hfr produced polypropene with a more uniform lamellar structure than Hfm. The mechanical properties were tested with dynamic mechanical analysis creep‐recovery tests. In the series, the polymers with the lowest isotacticities and therefore lowest crystallinities showed the best elastic properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4743–4751, 2006     

Heat Transport in Unsaturated Zone Thermal Energy Storage – Analysis with Two-Phase and Single-Phase Models

We analyze a field experiment where ambient air is injected into the soil during the summer and extracted again during the winter. A multiphase model accounting for the conductive transport as well as the convective transport with the moving liquid and gas phases is used along with a more simplified single-phase model where the convective transport is due to the gas alone. The latter model also accounts for subzero wintertime temperatures. The multiphase model captures well both the seasonal variations and the actual test sequence, the main calibration being in the adjustment of medium permeabilities based on the observed pressure responses. The effect of the injection pump on the temperature and humidity of the injection air needs to be known accurately. Taking into account the humidity of the injection air explicitly instead of using humidity-corrected enthalpy values also has an effect. The effect of various humidity and specific enthalpy assumptions is of the order of 1–1.5°C, while ignoring the wintertime subzero temperatures has an effect of 1–2°C. These differences are of the same order of magnitude as the heterogeneity-introduced differences in field data. Using the simplified single-phase model typically appears to cause a difference of 1–2°C, but can yield an even higher deviation of the order of 3–4°C.     

Fragment analysis of different size-reduced lignocellulosic pulps by hydrodynamic fractionation

Micro- and nanocelluloses are typically produced using intensive mechanical treatments such as grinding, milling or refining followed by high-pressure homogenization to liberate individual nano- and microcellulose fragments. Even though chemical and enzymatic pretreatments can be used to promote fiber disintegration, the required mechanical treatments are still highly energy consuming and very costly. Therefore, it is important to understand the kinetics and factors affecting the disintegration tendency of cellulose. In this study, the disintegration tendency of three different wood cellulose pulps with varying chemical composition processed in a PFI mill was examined by analyzing the fractional composition of the microparticles formed. The fractional compositions of the microfibrils and microparticles formed were measured with novel analyzers, which fractionated particles using a continuous water flow in a long tube. The hydrodynamic fractionators used in this study gave valuable information about different size of particles. Results showed that the amount of lignin and hemicelluloses clearly affected the kinetics and the mechanics of cellulose degradation. The P and S1 layers were peeled off from the Kraft fibers, causing the S2 layer to be cropped out. The thermomechanical pulp (TMP) fibers were first degraded by comminution and delamination from the middle lamella and the primary wall. As the refining process progressed, the fibers and fiber fragments began to unravel. Surprisingly, the semi-chemical pulp (SCP) fibers degraded more like Kraft fibers than TMP fibers despite their high lignin and extractive content.     

Preparation of Langmuir/Blodgett-cellulose Surfaces by Using Horizontal Dipping Procedure. Application for Polyelectrolyte Adsorption Studies Performed with QCM-D

A method of preparing model cellulose surfaces by the Langmuir–Blodgett (LB) technique with horizontal dipping procedure has been developed. The primary aim for the use of these surfaces was adsorption studies performed with the quartz crystal microbalance with dissipation (QCM-D) instrument. Hydrophobised cellulose (trimethylsilyl cellulose, TMSC) was deposited on the hydrophobic, polystyrene-coated QCM-D crystal. After 15 dipping cycles, the TMSC film fully covers the crystal surface. TMSC can easily be hydrolysed back to cellulose with acid hydrolysis. With this method a smooth, rigid, thin and reproducible cellulose film was obtained. Its morphology, coverage, chemical composition and wetting was further characterised using atomic force microscopy (AFM), X-Ray photoelectron spectroscopy (XPS), and contact angle measurements. The swelling behaviour and the stability of the cellulose film in aqueous solutions at different ionic strengths were studied using the QCM-D instrument. The swelling/deswelling properties of the cellulose film were those expected of polyelectrolytes with low charge density; some swelling occurred in pure water and the swelling decreased when the ionic strength was increased. No significant layer softening was detected during the swelling. The effect of electrolyte concentration and polymer charge density on the adsorption of cationic polyelectrolytes on the cellulose surface was also investigated. At low electrolyte concentration less of the highly charged PDADMAC was adsorbed as compared to low charged C-PAM. The adsorbed amount of PDADMAC increased with increasing ionic strength and a more compact layer was formed while the effect of electrolyte concentration on the adsorption of C-PAM was not as pronounced.     

Crystal structure of potassium tris[3-(2-pyridyl)pyrazolyl]hydroborate

The crystal structure of the potassium tris[3-(2-pyridyl)pyrazolyl]hydroborate has been determined. Potassium tris[3-(2-pyridyl)pyrazolyl]hydroborate crystallizes in the orthorhombic space group Pca2₁ with the parameters a=30.7323(5) ?, b=8.3083(1) ? and c=9.2173(2) ?, V=2353.48(7) ?³ with Z=4. The crystal structure reveals the formation of continuous chains where two bidentate arms of the hydroborate ligand are coordinated to one potassium and the third to another cation. The structures of numerous transition metal and actinide salts have been reported during the last decades but no alkali metal complexes were available.     

Copolymerization of vinylcyclohexane with ethene and propene using zirconocene catalysts

Vinylcyclohexane (VCH) was copolymerized with ethene and propene using methylaluminoxane‐activated metallocene catalysts. The catalyst precursor for the ethene copolymerization was rac‐ethylenebis(indenyl)ZrCl₂ ( 1 ). Propene copolymerizations were further studied with C_s‐symmetric isopropylidene(cyclopentadienyl)(fluorenyl)ZrCl₂ ( 2 ), C₁‐symmetric ethylene(1‐indenyl‐2‐phenyl‐2‐fluorenyl)ZrCl₂ ( 3 ), and “meso”‐dimethylsilyl[3‐benzylindenyl)(2‐methylbenz[e]indenyl)]ZrCl₂ ( 4 ). Catalyst 1 produced a random ethene–VCH copolymer with very high activity and moderate VCH incorporation. The highest comonomer content in the copolymer was 3.5 mol %. Catalysts 1 and 4 produced poly(propene‐co‐vinylcyclohexane) with moderate to good activities [up to 4900 and 15,400 kg of polymer/(mol of catalyst × h) for 1 and 4 , respectively] under similar reaction conditions but with fairly low comonomer contents (up to 1.0 and 2.0% for 1 and 4 , respectively). Catalysts 2 and 3 , both bearing a fluorenyl moiety, gave propene–VCH copolymers with only negligible amounts of the comonomer. The homopolymerization of VCH was performed with 1 as a reference, and low‐molar‐mass isotactic polyvinylcyclohexane with a low activity was obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6569–6574, 2006