Sunlight-Active BiOI Photocatalyst as an Efficient Adsorbent for the Removal of Organic Dyes and Antibiotics from Aqueous Solutions

A bismuth oxyiodide (BiOI) photocatalyst with excellent sunlight-driven performance was synthesized by a solvothermal route without the addition of surfactants or capping agents. The prepared photocatalyst exhibited a tetragonal phase with an energy band gap of 2.15 eV. The efficiency of the photocatalyst was elucidated by monitoring the photodegradation of organic dyes and antibiotics. The BiOI photocatalyst provided a 95% removal of norfloxacin (NOR) antibiotics under visible light illumination. Interestingly, the complete removal of Rhodamine B (RhB) dye was achieved after 80 min of natural sunlight irradiation. The photodegradation reaction followed the first-order reaction. Both photo-generated holes and electrons play vital roles in the photodegradation of the pollutant. The BiOI photocatalyst remains stable and still shows a high efficiency even after the fifth run. This confirms the great cycling ability and high structural stability of the photocatalyst. The prepared BiOI catalyst, with a high surface area of 118 m² g⁻¹, can act as an excellent adsorbent as well. The synergistic effect based on both adsorption and photocatalysis is a key factor in achieving a very high removal efficiency. The photoactivity under sunlight is higher than that observed under visible light, supporting the practical use of the BiOI photocatalyst for the removal of organic pollutants in wastewater through the utilization of abundant solar energy.     

Effect of solvents on electro-spinnability of polystyrene solutions and morphological appearance of resulting electrospun polystyrene fibers

The effects of solvents and their properties on electro-spinnability of the as-prepared polystyrene (PS) solutions and the morphological appearance of the as-spun PS fibers were investigated qualitatively by means of a scanning electron microscope (SEM). The eighteen solvents used were benzene, t-butylacetate, carbontetrachloride, chlorobenzene, chloroform, cyclohexane, decahydronaphthalene (decalin), 1,2-dichloroethane, dimethylformamide (DMF), 1,4-dioxane, ethylacetate, ethylbenzene, hexane, methylethylketone (MEK), nitrobenzene, tetrahydrofuran (THF), 1,2,3,4-tetrahydronaphthalene (tetralin), and toluene. The PS solutions in 1,2-dichloroethane, DMF, ethylacetate, MEK, and THF could produce fibers with high enough productivity, while the PS solutions in benzene, cyclohexane, decalin, ethylbenzene, nitrobenzene, and tetralin were not spinnable. Qualitative observation of the results obtained suggested that the important factors determining the electro-spinnability of the as-prepared PS solutions are high enough values of both the dipole moment of the solvent and the conductivity of both the solvent and the resulting solutions, high enough boiling point of the solvent, not-so-high values of both the viscosity and the surface tension of the resulting solutions.     

Hydrothermal Synthesis of Cadmium Sulfide Photocatalyst for Detoxification of Azo Dyes and Ofloxacin Antibiotic in Wastewater

The complete detoxification of harmful dyes and antibiotics from aqueous solution is essential for environmental remediation. The present work focuses on a facile hydrothermal synthesis of a cadmium sulfide (CdS) photocatalyst using thioacetamide as a sulfur source. The synthesized CdS showed a hexagonal phase with an energy gap of 2.27 eV, suggesting the promising visible-light-responsive semiconducting photocatalyst. The photoactivity of the prepared CdS was investigated by evaluating the degradation of the Reactive red 141 (RR141) dye, Congo red (CR) dye, and ofloxacin (OFL) antibiotic. After only 180 min of solar light illumination, a high performance of 98%, 97%, and 87% toward degradation of RR141, CR, and OFL was obtained. The photodegradation of the pollutants agrees well with the first-order kinetic model. The rate constant of 0.055 min⁻¹, 0.040 min⁻¹, and 0.026 min⁻¹, respectively, was reported toward degradation of RR141, CR, and OFL. Photogenerated holes and hydroxyl radicals play a vital role in removing toxic organic contaminants. The chemical stability of the prepared CdS was also confirmed. The synthesized CdS photocatalyst still maintains high photocatalytic performance even after five consecutive cycles of use, indicating its excellent cycling ability. The present research shows a facile route to fabricate a CdS photocatalyst to completely detoxify harmful organic pollutants, including dyes and antibiotics, in the environment.