A simple,rapid and sensitive method based on modified multiwalled carbon nanotube for preconcentration and determination of lead ions in aqueous media in natural pHs

In this study, multiwalled carbon nanotube (MWCNT) was modified by the pyridine group using a silane agent and characterized by infrared spectroscopy (IR), thermal analysis (TG/DTA), and elemental analysis (CHN) and scanning electron microscopy (SEM). The application of this sorbent was investigated in determination of lead ions in aqueous samples, using flame atomic absorption spectrometry (FAAS). Through this study, different parameters such as pH and sample flow rate on adsorption process and eluent concentration, volume and flow rate were optimized. The limit of detection (LOD), the relative standard deviation and the recovery of the method were 2 ng mL^?1, 1.3% and 99.7%, respectively. Two standard reference materials (NIST 1571 and NIST 1572) were used to verify accuracy of this method. Finally, the sorbent was successfully applied for extraction and determination of low levels of Pb(II) ions in aqueous samples.     

Spectrophotometric resolution of ternary mixtures of pseudoephedrine hydrochloride, dextromethorphan hydrobromide, and sodium benzoate in syrups using wavelength selection by net analyte signals calculated with hybrid linear analysis

Hybrid linear analysis (HLA), as a recent factor-based multivariate calibration technique, was applied for the spectrophotometric determination of ternary mixtures of pseudoephedrine hydrochloride (PSU), dextromethorphan hydrobromide (DXT), and sodium benzoate (BNZ). The utilized HLA was assisted by a wavelength selection procedure which was based on the calculation of the net analyte signal (NAS) regression plot in any considered wavelengths window for each test sample, in addition to a moving window strategy for searching the region with maximum linearity of NAS regression plot (minimum error indicator (EI)). HLA was applied because it was simpler to adapt to the NAS regression plot methodology, and also used less factors than partial least squares (PLS). An orthogonal array design was applied for formation of calibration and prediction sets in the concentration ranges 0-7500 μmol L⁻¹ for PSU, 0-300 μmol L⁻¹ for DXT, and 0-1400 μmol L⁻¹ for BNZ. The method had the ability to select wavelength regions that minimize the effect of non-linearity of the spectral data, in addition to that of non-modeled interferences. The application of the selected wavelength regions improved the obtained relative standard error of predictions for PSU, DXT, and BNZ, respectively, from 5.24, 8.67, and 5.48% to 2.19, 5.21, and 3.62% (using lower number of factors). To check the ability of the proposed method in selection of linear regions of spectra, a test for detecting non-linear regions of spectral data in multivariate spectroscopic assays was also described. Additives in the commercial syrup samples did not interfere with their determinations. The method was successfully applied for the determination of pseudoephedrine HCl, dextromethorphan HBr, and sodium benzoate in cough suppressant syrup samples.     

Solvent selection in ultrasonic-assisted emulsification microextraction: Comparison between high- and low-density solvents by means of novel type of extraction vessel

There are numerous published reports about dispersive liquid phase microextraction of the wide range of substances, however, till now no broadly accepted systematic and purpose oriented selection of extraction solvent has been proposed. Most works deal with the optimization of available solvents without adequate pre-consideration of properness. In this study, it is tried to compare the performances of low- and high-density solvents at the same conditions by means of novel type of extraction vessel with head and bottom conical shape. Extraction efficiencies of seven basic pharmaceutical compounds using eighteen common organic solvents were studied in this work. It was much easier to work with high-density solvents and they mostly showed better performances. This work shows that although exact predicting the performance of the solvents is multifaceted case but the pre-consideration of initial selection of solvents with attention to the physiochemical properties of the desired analytes is feasible and promising. Finally, the practicality of the method for extraction from urine and plasma samples was investigated.     

A new approach in modeling of constant temperature boundary condition in thermal lattice‐Boltzmann method

The lattice‐Boltzmann method is being applied to a diversity of fluid flow and heat transfer problems nowadays. Because of its microscale nature, strict attention should be paid when introducing macroscopic inputs to the model. One of the challenging issues dealing with macroscale and microscale treatment is the implementation of boundary conditions. In this regard constant‐temperature boundaries are frequently used in energy transfer problems. Such boundaries are simply modeled in Navier–Stokes based solvers, but they are not so harnessed in lattice‐Boltzmann models. One of the problems is that the calculated tangential heat flux is not zero along such boundaries in most of the previous models. In the present paper, a model has been developed, which has the capability of controlling tangential heat flux along the constant‐temperature boundaries. It aims to set the heat flux nearly zero along the boundary in midplane grid schemes. Copyright © 2012 John Wiley & Sons, Ltd.     

Finely dispersed palladium on silk‐fibroin as an efficient and ligand‐free catalyst for Heck cross‐coupling reaction

A palladium–fibroin complex (Pd/Fib.) was prepared by the addition of sonicated fibroin fiber in water to palladium acetate solution. Pd (OAc)₂ was absorbed by fibroin and reduced with NaBH₄ at room temperature to the Pd(0) nanoparticles. Powder‐X‐ray diffraction, scanning electron microscopy–energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, CHN elemental analysis and inductively coupled plasma‐atomic emission spectroscopy were carried out to characterize the Pd/Fib. catalyst. Catalytic activity of this finely dispersed palladium was examined in the Heck coupling reaction. The catalytic coupling of aryl halides (‐Cl, ‐Br, ‐I) and olefins led to the formation of the corresponding coupled products in moderate to high yields under air atmosphere. A variety of substrates, including electron‐rich and electron‐poor aryl halides, were converted smoothly to the targeted products in simple procedure. Heterogeneous supported Pd catalyst can be recycled and reused several times.     

Ag3[PMo12O40]: An efficient and green catalyst for the synthesis of highly functionalized pyran‐annulated heterocycles via multicomponent reaction

A facile, efficient and eco‐friendly catalytic protocol was developed for the synthesis of medicinally important pyran‐annulated heterocycles via multicomponent reaction (MCR). Cyclocondensation of differently substituted aromatic aldehydes, malononitrile/ethyl cyanoacetate and various β‐dicarbonyl compounds in the presence of Ag₃[PMo₁₂O₄₀]?nH₂O as heterogeneous catalyst, in EtOH–H₂O, afforded diverse pyran‐fused chromene analogues. The merits observed for this approach were it being conducted via MCR, using commercially available or easily accessible starting materials in the presence of a green and easily separable heterogeneous and reusable catalyst, and affording high yields of desired products in very short reaction times with high purity in one‐pot fashion, thus providing a superior alternative approach for the synthesis of pyran‐annulated heterocycles.     

Computational Study on the Structural and Electronic Properties of Multi-Nuclear Palladium and Nickel Silyl Complexes via DFT and QTAIM Approaches

In this research, we have concentrated on the survey of ability of density functional methods and also modern semi-empirical approaches to reproduce the crystal structure of a binuclear silyl nickel complex and a trinuclear palladium silyl complex. In the structural analysis of the aforesaid nickel and palladium complexes, we have also interested to investigate the possibility of Si-Si bond formation between SiH₂ and μ-SiH moieties from the structural and electronic viewpoints. Comparison of our calculated structural parameters of aforementioned complexes with the available X-ray crystallographical data reveals that both functionals (B3LYP and M062X) can well reproduce X-ray structure of the complex with a near accuracy while the PM6-D2 semi-empirical calculated values are not in a reliable agreement with the crystallographical data. In the next step, we assessed the nature of interactions between palladium and nickel metal ions with silyl ligands via Quantum Theory of Atoms in Molecule (QTAIM) computations. Furthermore, we have analyzed the possibility of Si-Si bond formation in the aforementioned complexes by means of topological electronic indices. Strictly speaking, QTAIM calculations have been performed to explore the electronic density, its laplacian and electronic energy density at some key bond critical points to interpret the structural features of aforesaid complexes from the electronic point of view.     

A numerical investigation of developing flow in an eccentric curved annulus in the presence of gravity

In this article developing incompressible viscous flow in an eccentric curved annulus in the presence of gravity is numerically studied using a second order finite difference method based on the projection algorithm to solve the governing equations including the continuity and full Navier–Stokes equations. The equations written in a bipolar–toroidal coordinate system are discretized in a three dimensional staggered grid. The effects of governing non-dimensional parameters including the eccentricity, non-dimensional curvature ratio, Dean number, Froude number, aspect ratio, and the Reynolds number on the flow field in the entrance and fully developed region are investigated. The numerical results indicate that at the small Froude numbers, the flow field distorts from the symmetrical condition due to the larger body force effect and the axial velocity formation mostly takes place at the lower half of the annulus. In addition, at the constant Froude number, by decreasing the curvature radius, the peak axial velocity and its sharp gradient appear on the outer curvature region due to the larger centrifugal forces and by increasing the eccentricity the flow rate intensifies at the wider region and weakens at the narrower region due to the larger flow resistance. Furthermore, the friction factor increases by decreasing the Froude number and increasing the Dean number.