Synthesis and characterization of oxidized cellulose

Samples of oxidized cellulose (OC) with various carboxyl contents and degrees of crystallinity were obtained by the oxidation of native and mercerized cellulose with a solution of nitrogen(IV) oxide in CCl₄. A detailed characterization of these OC samples was performed. The effect of oxidation conditions (concentration of N₂O₄ in the solution and oxidation time) and starting cellulose material on OC characteristics (carboxyl, carbonyl and nitrogen content, degree of crystallinity and polymerization, surface area and swelling, and acidic properties) was investigated. Reactivity in the oxidation process was higher in mercerized cellulose than in native cellulose. The action of dilute solutions (10–15%) of N₂O₄ did not affect the degree of crystallinity of cellulose samples. Under these conditions, the oxidation took place mainly in amorphous regions and on the surface of crystallites. Oxidation in a concentrated (40%) N₂O₄ solution led to the destruction of crystallites, which increased the surface area and swelling of cellulose in water. The surface area and the swelling of OC samples increased with a decrease in the index of crystallinity. The acidic properties of OC were shown to increase with an increase of swelling in water. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4785–4791, 2004     

Contributions to the synthesis of some ferrocene-containing antibiotics

This Review discusses the synthesis and characterization by our Group of new antibiotics belonging to the class of penicillins, cephalosporins and rifamycins with ferrocenyl and 1, 1′-ferrocenilene residues in the molecule. As reactants for 6-aminopenicillanic acid (6-APA) and 7-aminocephalosporanic acid (7-ACA) the following were used: 1, 1-bis(chlorocarbonyl)ferrocene, ferrocenyl sulfochloride, 1, 1′-ferrocenylenedisulfochloride and thioglycolic acids S-modified with ferrocene. In the synthesis of rifamycins, the hydrazides of the thioglycolic acids, S-modified with ferrocene, were employed as nucleophilic agents. The synthesized intermediates were characterized by elemental analysis, TLC, IR, UV and ¹H NMR spectra. The characterization of new antibiotics was made by TLC, IR and UV spectral analysis. Biological activity was tested on Gram-negative and Gram-positive bacteria. Good activity is reported towards Gram-positive bacteria in the case of derivatives containing residues of thioglycolic acid S-modified with ferrocene, the antibacterial activity being similar to that of amoxicillin, carbenicillin and cephalothin. All compounds are inactive towards Gram-negative bacteria.     

Kinetic features of ethylene polymerization over supported catalysts [2,6‐bis(imino)pyridyl iron dichloride/magnesium dichloride] with AlR3 as an activator

The effects of polymerization temperature, polymerization time, ethylene and hydrogen concentration, and effect of comonomers (hexene‐1, propylene) on the activity of supported catalyst of composition LFeCl₂/MgCl₂‐Al(i‐Bu)₃ (L = 2,6‐bis[1‐(2,6‐dimethylphenylimino)ethyl] pyridyl) and polymer characteristics (molecular weight (MW), molecular‐weight distribution (MWD), molecular structure) have been studied. Effective activation energy of ethylene polymerization over LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a value typical of supported Ziegler–Natta catalysts (11.9 kcal/mol). The polymerization reaction is of the first order with respect to monomer at the ethylene concentration >0.2 mol/L. Addition of small amounts of hydrogen (9–17%) significantly increases the activity; however, further increase in hydrogen concentration decreases the activity. The IRS and DSC analysis of PE indicates that catalyst LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a very low copolymerizing ability toward propylene and hexene‐1. MW and MWD of PE produced over these catalysts depend on the polymerization time, ethylene and hexene‐1 concentration. The activation effect of hydrogen and other kinetic features of ethylene polymerization over supported catalysts based on the Fe (II) complexes are discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5057–5066, 2007     

Metallocene monomers and polymers. Ferrocenyl and ferrocenylene derivatives

The synthesis and study of some polyenes, polýiminoimides and Schiff polybases with ferrocene obtained by either polymerization or polycondensation are reported.The following monomers were used: ethynylferrocene, 1-chloro-1′-ethynyl-ferrocene, α-chloro-β-formyl-p-ferrocenylstyrene, p-ferrocenylphenylacetylene, p-ferrocenylacetophenone, 1,1′-diacetylferrocene and 1,1′-bis[β-(2-furyl)acryloyl]ferrocene which were characterized by spectral and thermodifferential analyses and Hückel MO calculations. The polymerization was performed in the presence of benzoyl and lauroyl peroxides, triisopropylboron and complex catalysts of [P(C₆H₅)₃]₂ NiX₂ type. The ferrocene derivatives were polycondensed with biuret, 4,4′-diaminodiphenyl ether, 4,4′-diaminodiphenyl thioether, 4,4′-diamino-2,2′-dinitrodiphenyl disulphide in the presence of metallic salts and p-toluene sulphonic acid as catalysts.Polymers with either linear or tridimensional structure showing good thermal stability and semiconducting properties have been obtained. Some polymers show catalytical activity in the polymerization of chloroformylated vinylic derivatives.     

The neomycin biosynthetic gene cluster of Streptomyces fradiae NCIMB 8233: characterisation of an aminotransferase involved in the formation of 2-deoxystreptamine

The biosynthetic gene cluster of the 2-deoxystreptamine (DOS)-containing aminoglycoside antibiotic neomycin has been cloned for the first time by screening of a cosmid library of Streptomyces fradiae NCIMB 8233. Sequence analysis has identified 21 putative open reading frames (ORFs) in the neomycin gene cluster (neo) with significant protein sequence similarity to gene products involved in the biosynthesis of other DOS-containing aminoglycosides, namely butirosin (btr), gentamycin (gnt), tobramycin (tbm) and kanamycin (kan). Located at the 5'-end of the neo gene cluster is the previously-characterised neomycin phosphotransferase gene (apH). Three genes unique to the neo and btr clusters have been revealed by comparison of the neo cluster to btr, gnt, tbm and kan clusters. This suggests that these three genes may be involved in the transfer of a ribose moiety to the DOS ring during the antibiotic biosynthesis. The product of the neo-6 gene is characterised here as the L-glutamine : 2-deoxy-scyllo-inosose aminotransferase responsible for the first transamination in DOS biosynthesis, which supports the assignment of the gene cluster.     

Effect of Poly(methacrylic acid) on the Cytokine Level in an In Vivo Tumor Model

Cancer is a leading cause of mortality globally. Despite remarkable improvements in cancer-treatment approaches, disease recurrence and progression remain major obstacles to therapy. While chemotherapy is still a first-line treatment for a variety of cancers, the focus has shifted to the development and application of new approaches to therapy. Nevertheless, the relationship between immune response, neoplastic diseases and treatment efficiency is not fully understood. Therefore, the aim of the study was to investigate the immunopharmacological effects of methacrylic acid homopolymer in an in vivo tumor model. Materials and methods: Monomeric methacrylic acid was used to synthesize polymers. Methacrylic acid was polymerized in dioxane in the presence of 4-Cyano-4-[(dodecylsulfanylthiocarbonyl)sulfanyl]pentanoic acid. To study the molecular weight characteristics of PMAA by GPC, carboxyl groups were preliminarily methylated with diazomethane. An experimental cancer model was obtained by grafting RMK1 breast cancer cells. The serum levels of IL-6, IL-10, IL-17, transforming growth factor β1 (TGF-β1), and tumor necrosis factor α (TNF-α) were measured by ELISA. Results: The effect of PMAA on the serum concentrations of several cytokines was studied upon its single administration to laboratory animals in early neoplastic process. The IL-6, IL-17 and TGF-β1 concentrations were found to change significantly and reach the level observed in intact rats. The IL-10 concentration tended to normalize. Conclusion: The positive results obtained are the basis for further studies on the effect of methacrylic-acid polymers with different molecular-weight characteristics on the neoplastic process.     

Translational cooling of doped nanocrystals by Raman pulses: Towards macroscopic quantum state

One of the most interesting problems of modern physics is the realization of nanoparticles in macroscopic quantum states, in which they behave as a quantum objects. These states can only be implemented at ultra-low translational temperatures that have not been achieved so far. Here we develop a novel method for optical cooling of CaF₂:Yb³⁺ nanocrystals, which is based on the coherent population transfer induced in the impurity ions by ultraviolet Raman pulses. A doped nanocrystal localized in a radio-frequency trap is cooled due to the photon recoil from the pulses of varied intensity. The proposed method allows to obtain nanocrystals with translational temperatures of the order of 10^?9 K, which indicates that the nanocrystal approaches a macroscopic quantum state.     

Observations of surface modifications induced by the multiple pulse irradiation using a soft picosecond x-ray laser beam

To study the interactions between picosecond soft x-ray laser (SXRL) beams and material surfaces, gold (Au), copper (Cu), and silicon (Si) surfaces were irradiated with SXRL pulses having a wavelength of 13.9 nm and a duration of ～7 ps. Following irradiation, the surfaces of the substrates were observed using a scanning electron microscope and an atomic force microscope. With single pulse irradiation, ripple-like structures were formed on the Au and Cu surfaces. These structures were different from previously investigated conical structures formed on an Al surface. In addition, it was confirmed that the development of modified structures, i.e., growth of hillocks on the Au and Cu surfaces, was observed after multiple SXRL pulse exposures. However, on the Si surface, deep holes that seemed to be melted structures induced by the accumulation of multiple pulses of irradiations were found. Therefore, it was concluded that SXRL beam irradiation of various material surfaces causes different types of surface modifications, and the changes in the surface behaviors are attributed to the differences in the elemental properties, such as the attenuation length of x-ray photons.