Intelligent reversible watermarking technique in medical images using GA and PSO

The advances in recording, editing, and broadcasting multimedia contents in digital form motivate to protect these digital contents from illegal use, such as duplication, manipulation, and redistribution. However, watermarking algorithms are designed to satisfy requirements of applications, as different applications have different concerns. We intend to design a watermarking algorithm for applications which require high embedding capacity and imperceptibility, to maintain the integrity of the host signal as well as embedded information. Reversible watermarking is a promising technique which satisfies our requirements. In this paper, we concentrate on improving the watermark capacity and reducing the perceptual degradation of an image. We investigated the Luo's [1] additive interpolation-error expansion algorithm and enhanced it by incorporating with two intelligent techniques: genetic algorithm (GA), and particle swarm optimization (PSO). Genetic algorithm is applied to exploit the correlation of image pixel values to obtain better estimation of neighboring pixel values, which results in optimal balance between information storage capacity and imperceptibility. Particle swarm optimization (intelligent technique) is also applied for the same purpose. Experimental results show that PSO and GA nearly give the same results, but GA outperforms the PSO. Experimental results also reveal that the proposed strategy outperforms the state of art works in terms of perceptual quality and watermarking payload.     

Reactivity of the Cu2O(1 0 0) surface: Insights from first principles calculations

We present a summary of results of systematic first principles calculations of the electronic and geometric structures of the Cu₂O(1 0 0) surface and the process of CO oxidation on this surface (energetics and pathways of adsorption, diffusion and reactions of CO and O₂ on the surface). The (p, T) phase diagram of the Cu₂O(1 0 0) in equilibrium of with gas phase O₂ built using the ab initio thermodynamics approach suggests that the O-terminated surface is preferred over the Cu-terminated one within the entire ranges of pressures and temperatures in which the compound exists. Metastable Cu-terminated Cu₂O(1 0 0) is found to undergo a surface reconstruction in agreement with experiment. We find CO to oxidize spontaneously on the O-terminated Cu₂O(1 0 0) surface by consuming surface O atoms. Our calculations also show that the surface O-vacancies left in the course of the CO oxidation can be easily filled with dissociative adsorption of the gas phase O₂ molecules, which are usually present in reaction environment.     

Alkali-induced enhancement of surface electronic polarizibility

From results of ab initio electronic structure calculations based on density functional theory for a set of prototype systems, we find alkali adsorbates to cause a dramatic enhancement of the electronic polarizability of the metal surface extending it several angstroms into the vacuum. This phenomenon is traceable to an unusual feature induced in the surface potential on alkali adsorption. The effect appears to be general, as we find it to be present on metals as varied as Pd and Cu, and helps explain the observed substantial decrease in the vibrational frequency of molecules when coadsorbed with alkalis on metal surfaces. Specifically, for two dissimilar molecules CO and O(2), we trace the softening of the frequencies of their stretching mode when coadsorbed with K on Pd(111) to the enhanced electronic polarizability.     

Biosynthesis of gold and silver nanoparticles by natural precursor clove and their functionalization with amine group

We report a simple and cost effective way for synthesis of metallic nanoparticles (Au and Ag) using natural precursor clove. Au and Ag nanoparticles have been synthesized by reducing the aqueous solution of AuCl₄ and AgNO₃ with clove extract. One interesting aspect here is that reduction time is quite small (few minutes instead of hours as compared to other natural precursors). We synthesized gold and silver nanoparticles of different shape and size by varying the ratio of AuCl₄ and AgNO₃ with respect to clove extract, where the dominant component is eugenol. The evolution of Au and Ag nanoparticles from the reduction of different ratios of AuCl₄ and AgNO₃ with optimised concentration of the clove extract has been evaluated through monitoring of surface plasmon behaviour as a function of time. The reduction of AuCl₄ and AgNO₃ by eugenol is because of the inductive effect of methoxy and allyl groups which are present at ortho and para positions of proton releasing –OH group as two electrons are released from one molecule of eugenol. This is followed by the formation of resonating structure of the anionic form of eugenol. The presence of methoxy and allyl groups has been confirmed by FTIR. To the best of our knowledge, use of clove as reducing agent, the consequent very short time (minutes instead of hours and without any scavenger) and the elucidation of mechanism of reduction based on FTIR analysis has not been attempted earlier.     

Solvent-free,microwave-assisted highly efficient,rapid and simple synthesis of biphenyl compounds by using silica based Pd(II) catalyst

To maintain catalytic performance of any catalyst for a long time, the selection of support material is a very important parameter for heterogeneous catalytic systems, and this performance makes the catalyst valuable. In view of its low cost and availability, silica can be considered as a good support material for transition metal ions in the cross coupling reactions. Therefore, this study describes i) silica-gel based palladium catalyst with a long-term catalytic performance, ii) rapid, simple, economic, and green procedure which was developed for Suzuki reactions. The catalyst showed superior reusability (ten runs) and catalytic efficiency against coupling reactions under mild conditions (50°C, 5 min and air atmosphere). Moreover, the catalyst gave partially good reaction yields with aril chlorides which have poor activity in coupling reactions. In addition, an excellent turnover number (TON: 66000) and frequency (TOF: 825000) were obtained using very small catalyst loading (1.5 × 10^?3 mol %). This paper concludes that silica-gel based Pd(II) catalyst and the protocol of synthesis of biaryls were suitable for coupling reactions.     

Protonated Dipeptide Losses from b 5 and b 4 Ions of Side Chain Hydroxyl Group Containing Pentapeptides

In this study, C-terminal protonated dipeptide eliminations were reported for both b ₅ and b ₄ ions of side chain hydroxyl group (–OH) containing pentapeptides. The study utilized the model C-terminal amidated pentapeptides having sequences of XGGFL and AXVYI, where X represents serine (S), threonine (T), glutamic acid (E), aspartic acid (D), or tyrosine (Y) residue. Upon low-energy collision-induced dissociation (CID) of XGGFL (where X?=?S, T, E, D, and Y) model peptide series, the ions at m/z 279 and 223 were observed as common fragments in all b ₅ and b ₄ ion (except b ₄ ion of YGGFL) mass spectra, respectively. By contrast, peptides, namely S_MeGGFL-NH₂ and E_OMeGGFL-NH₂, did not show either the ion at m/z 279 or the ion at m/z 223. It is shown that the side chain hydroxyl group is required for the possible mechanism to take place that furnishes the protonated dipeptide loss from b ₅ and b ₄ ions. In addition, the ions at m/z 295 and 281 were detected as common fragments in all b ₅ and b ₄ ion (except b ₄ ion of AYVYI) mass spectra, respectively, for AXVYI model peptide series. The MS⁴ experiments exhibited that the fragment ions at m/z 279, 223, 295, and 281 entirely reflect the same fragmentation behavior of [M?+?H]⁺ ion generated from commercial dipeptides FL-OH, GF-OH, YI-OH, and VY-OH. These novel eliminations reported here for b ₅ and b ₄ ions can be useful in assigning the correct and reliable peptide sequences for high-throughput proteomic studies.

Non-Direct Sequence Ions in the Tandem Mass Spectrometry of Protonated Peptide Amides—an Energy-Resolved Study

The fragmentation reactions of the MH⁺ ions of Leu-enkephalin amide and a variety of heptapeptide amides have been studied in detail as a function of collision energy using a QqToF beam type mass spectrometer. The initial fragmentation of the protonated amides involves primarily formation of b_n ions, including significant loss of NH₃ from the MH⁺ ions. Further fragmentation of these b_n ions occurs following macrocyclization/ring opening leading in many cases to b_n ions with permuted sequences and, thus, to formation of non-direct sequence ions. The importance of these non-direct sequence ions increases markedly with increasing collision energy, making peptide sequence determination difficult, if not impossible, at higher collision energies.

Binary and Ternary Copper(II) Complexes with NIPAAm/IA Copolymers and Aminoacids: Interpretation of UV‐Visible Spectra and Cyclic Voltammograms

The complex formations of homopolymers and copolymers of poly(N‐isopropyl acrylamide) (PNIPAAm), polyacrylamide (PAAm) and poly(itaconic acid) (PIA) with Cu(II) ions in aqueous solutions were studied by using UV‐visible spectra in the region of 200–1100 nm and cyclic voltammograms between ?0.800 V and 0.600 V. According to the optical and electrochemical spectra of the polymer‐ and copolymer‐Cu(II) complexes and their ternary complexes with alanine, i.e., absorptions and the shifts in the wavelength of the maximum absorptions, currents and potentials of the peaks in the pH range of 3–12, the intensities of anodic and cathodic peak currents of polymers containing IA groups decrease with increasing pH and they show maximum absorptions at lower wavelengths than do the homopolymers used in this work. The peak point of the visible band shifts from 800 to 650 nm, with increasing pH, while the intensity of the third anodic peak observed after pH=4 increases in the case of both Ala‐Cu(II) and its ternary solution with P(NIPAAm‐co‐IA, 9.8 mol%). Both the pH‐dependent shifts of maximum absorptions and the appearence of the third anodic peaks as the pH raised were interpreted as a presence of tetracoordinated Cu(II) complexes in the solution and on the electrode surface, involving combined carboxyl, amide and amine interaction.