Potential formation and high density plasma production on the tandem mirror GAMMA 10

GAMMA 10 experiments have advanced in high density experiments after the last EPS Workshop where we reported high density plasma production by using an ion cyclotron range of frequency heating at a high harmonic frequency and neutral beam injection in the central cell. Recently a high density plasma was obtained with much improved reproducibility than before and without degradation of diamagnetic signal. The high density plasma was attained by adjusting the spacing of the conducting plates installed in the anchor transition regions. Dependencies of particle confinement time, ion energy confinement time and plasma confining potential on plasma density were obtained for the first time in the high density region. Presented at 5th Workshop “Role of Electric Fields in Plasma Confinement and Exhaust”, Montreus, Switzerland, June 23–24, 2002.     

Numerical analysis of turbulent structure in compound meandering open channel by algebraic Reynolds stress model

The turbulent flow in a compound meandering channel with a rectangular cross section is one of the most complicated turbulent flows, because the flow behaviour is influenced by several kinds of forces, including centrifugal forces, pressure‐driven forces and shear stresses generated by momentum transfer between the main channel and the flood plain. Numerical analysis has been performed for the fully developed turbulent flow in a compound meandering open‐channel flow using an algebraic Reynolds stress model. The boundary‐fitted coordinate system is introduced as a method for coordinate transformation in order to set the boundary conditions along the complicated shape of the meandering open channel. The turbulence model consists of transport equations for turbulent energy and dissipation, in conjunction with an algebraic stress model based on the Reynolds stress transport equations. With reference to the pressure–strain term, we have made use of a modified pressure–strain term. The boundary condition of the fluctuating vertical velocity is set to zero not only for the free surface, but also for computational grid points next to the free surface, because experimental results have shown that the fluctuating vertical velocity approaches zero near the free surface. In order to examine the validity of the present numerical method and the turbulent model, the calculated results are compared with experimental data measured by laser Doppler anemometer. In addition, the compound meandering open channel is clarified somewhat based on the calculated results. As a result of the analysis, the present algebraic Reynolds stress model is shown to be able to reasonably predict the turbulent flow in a compound meandering open channel. Copyright © 2005 John Wiley & Sons, Ltd.     

Temperature dependence of the exafs spectrum in YBa2Cu3O7−δ compounds

The temperature dependence of the extended X-ray absorption fine structure (EXAFS) is studied in the high T_c superconductors, YBa₂Cu₃O_7−δ. The measurements were done at the Cu K-edge for samples of two orthorhombic phases (T_c≈90 K and ≈58 K, respectively) and a nonsuperconducting tetragonal phase. Interatomic distances and mean square relative displacements σ² for Cu-O bonds are determined by the least squares refinement. The results indicate that values of σ² increase near T_c for both the orthorhombic samples. It is concluded that this anomalous behavior related to T_c is caused by an anomalous vibration of oxygen atoms in the Ba-O layer. Changes in the Cu-O distances from 300 to 20 K are not found.     

Changes in the near-edge X-ray absorption fine structure spectra of long-chain diacetylene derivatives through photopolymerization in Langmuir–Blodgett films

Photopolymerization of cadmium 10,12-pentacosadiynoate (CdDA) in Langmuir–Blodgett (LB) films, with the molecular packing well arranged by moderate preannealing, was investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Greenish films of polydiacetylene with an absorption wavelength of 705 nm were obtained through the photopolymerization of preannealed monomer LB films, and this resulted in an extended π-conjugate system based on the well-ordered monomer in a two-dimensional arrangement. The electronic structures of the polydiacetylenes were found to be correlated to the variation of the molecular arrangements in the films from the changes in the NEXAFS spectra through photopolymerization in the LB films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2329–2336, 2004     

Characterization of metal binding properties of rhamnogalacturonan II from plant cell walls by size-exclusion HPLC/ICP-MS.

The binding properties of metal ions to a pectic polysaccharide, rhamnogalacturonan II (RG-II), from plant cell walls were analyzed by size-exclusion HPLC/ICP-MS. The dimeric RG-II borate complex (dRG-II-B) from sugar beet and red wine contained 0.8 - 1.1 mol/mol of B, 0.8 - 1.1 mol/mol of Ca, 0.1 - 0.3 mol/mol of Sr, and 0.03 - 0.07 mol/mol of Ba. The treatment of dRG-II-B with Sr2+, Ba2+, Pb2+ or La3+ exchanged the originally present Ca, Sr and Ba. In contrast, monomeric RG-II (mRG-II), which contained approximately 0.1 mol/mol of Ca, formed complexes with La3+, Eu3+, and Lu3+ added to the solution, but did not do so with Ca2+, Sr2+, Ba2+ and Pb2+. The HPLC/ICP-MS and HPLC/RI (refractive index detector) analysis of the partially hydrolyzed mRG-II that was treated with La3+ indicated that the side chains and backbone of mRG-II together form a lanthanoid binding site.     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Novel pattern formation in the collapse process of floating monolayer at the air-water interface

We have observed a remarkable two-armed spiral in the collapse process of a floating monolayer at the air-water interface by phase contrast microscopy. This demonstrates that the floating monolayer as a form of soft condensed matter reorganizes itself due to a certain kind of macroscopic or collective behavior of molecules as it collapses. This pattern formation is caused by the breakdown of a critical dynamical balance between the deformation of solid domain and the applied surface pressure. The fragility as well as the flexibility of the floating monolayer can be associated with the observed pattern growth. There are also observed interesting, periodically arranged collections of molecules in numerous collapsed regions. Received: 8 July 1997 / Accepted: 4 November 1997     

Gamma-ray spectroscopy of the neutron-rich Ni region through heavy-ion deep-inelastic collisions

Nuclei in the neutron-rich Ni region have been studied by γ-ray spectroscopy. Gamma-rays emitted from isomers, with T _1/2 > 1 ns, produced in heavy-ion deep-inelastic collisions were measured with an isomer-scope. The nuclear structure of the doubly magic ⁶⁸Ni and its neighbor ^69,71Cu is discussed on the basis of the shell model. Future experiments for more neutron-rich Ni nuclei are also viewed. Received: 1 May 2001 / Accepted: 4 December 2001     

Density functional calculations of dangling bonds for CN and SiN films

Hyperfine interaction constants (HFICs) of dangling bonds for CN and SiN films were calculated by density-functional theory. The averaged ¹⁴N isotropic HFICs for C dangling bonds are almost equal to those for Si dangling bonds. The anisotropic ¹⁴N HFICs calculated for C dangling bonds are larger than those for Si dangling bonds by a factor 2. The calculated results were compared with experimental results obtained by electron spin resonance and electron nuclear double resonance. It was indicated that the carbon dangling bonds are located such that they avoid N atoms in CN films.     

Analysis of atomic arrangement in magnetic Fe–Pt nanoparticles

The order parameter S of Fe–Pt nanoparticles is estimated from X-ray diffraction (XRD) patterns. The total intensity of a diffraction peak is obtained by Rietveld analysis as well as simply integrating the intensity. The Rietveld analysis is found to provide a plausible value of S even for a sample showing an XRD pattern with broad and overlapped peaks. Another order parameter Q, which is obtained from Mössbauer spectra, is introduced, and it is confirmed that Q is equivalent to the probability of Fe atoms being in the L1₀-type atomic arrangement. The coercivity of Fe–Pt nanoparticles is directly proportional to Q, while it vanishes at S=0.4, indicating that the magnetic property of Fe–Pt nanoparticles has a closer relationship to Q than S.