Synthesis and characterization of model 3‐miktoarm star copolymers of poly(dimethylsiloxane) and poly(2‐vinylpyridine)

3‐Miktoarm star copolymers, 3μ‐D₂V, with two poly(dimethylsiloxane) (PDMS) and one poly(2‐vinylpyridine) (P2VP) arm, were synthesized by using anionic polymerization–high vacuum techniques and (chloromethylphenylethyl)methyl dichlorosilane, heterofunctional linking agent, with two SiCl groups and one CH₂Cl group. The synthetic strategy involves the selective reaction of the two ? SiCl groups with PDMSOLi living chains, followed by reaction of the remaining chloromethyl group with P2VPLi. Combined molecular characterization results (size exclusion chromatography, membrane osmometry, and ¹H NMR spectroscopy) revealed a high degree of structural and compositional homogeneity. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 614–619, 2006     

Determination of a new cerebral vasodilator 2,6-dimethyl-4-(3-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3-[2-(N-benzyl-N-methylamino)]-ethyl ester 5-methyl ester hydrochloride (YC-93) in plasma by electron capture gas chromatography

A highly sensitive method for the quantitative determination of 2,6-dimethy-4-(3-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3-[2-(N-benzyl-N-methyl-amino)]-ethyl ester 5-methyl ester hydrochloride (YC-93) in plasma is described. After extraction, YC-93 was oxidized to pyridine analogue with nitrous acid and detected by electron capture gas chromatography. The sensitivity was 2–3 ng/ml, which is suficient to determine plasma concentrations of YC-93 after oral administration of clinical doses to humans.     

Influence of Cu electroplating solutions on boron carbon nitride (BCN) film

Cu electroplating is required for the fabrication of Cu/low-k interconnections. The permeation of a plating solution into low-k films during Cu electroplating is a serious challenge for 45-nm nodes and more complex devices. We investigated the influence of Cu electroplating solutions on boron carbon nitride (BCN) as a low-k film. After dipping it into a Cu electroplating solution that contained additives, the BCN film's hydrophilic surface changed to a hydrophobic surface, and the incorporation of water into the BCN film was suppressed by surfactant adsorption. Sulfuric residue was detected on the BCN sample by thermal desorption spectroscopy after treatment in the Cu electroplating solution with additives; however, it was found through electrical measurements that this solution did not affect the leakage current or the dielectric constant of the BCN film. We successfully fabricated an electroplating Cu layer on a BCN film with good adhesion, and we believe that this BCN film is a sufficiently useful material for Cu/BCN integration in LSI.     

Laser Light and X-Ray Diffraction Studies of Oriented Isotactic Polypropylene (iPP) Prepared by Temperature Slope Crystallization

Isotactic polypropylene (iPP) film was melt-crystallized in a temperature gradient. The iPP film showed well oriented α- and β-crystalline textures along the gradient. The crystalline structure, phase transition boundary and lamellar twisting were examined by X-ray diffraction and laser light diffraction (LLD). On the α-β boundary, LLD shows a sharp streak perpendicular to the boundary, where the a-axis of the β-crystal is oriented perpendicular to the temperature gradient. Apart from the boundary, the a-axis of the β-crystal becomes parallel to the gradient. The β-crystal shows lamellar twisting with a pitch of 200 μm at room temperature. When heated the β-crystal, the lamellar distance of 295Å at room temperature decreases to 285Å at 80–100°C and then increases to more than 300Å above 120°C. During the heating, the value of the twist period increases from 200 to 210 μm at 90–100°C, and then to above 224 μm at 140°C. The increase of the twist period is related to the increasing crystalline thickness of the β-lamellae.     

Optical properties of Au–Ag core–shell nanorods on glass and ITO substrates

Gold-silver core–shell nanorods were deposited on glass and ITO plates. SEM observations indicated that some of these nanorods were standing on the ITO plate. The extinction spectra of the plates were measured by varying the angles of incidence of p-polarized monitor light. Deconvolution of these spectra gave six bands in the visible region. The dependence of the peak intensities on the incident angles indicated that the bands at 390 and 420 nm originated from surface plasmon bands in the transverse direction of the nanorods.     

Two-dimensional hydrophilic interaction chromatography coupling anion-exchange and hydrophilic interaction columns for separation of 2-pyridylamino derivatives of neutral and sialylated N-glycans

A novel chromatographic approach coupling anion-exchange (diethylaminoethylene) and hydrophilic-interaction (amide or zwitterionic type) columns was developed for the separating of 2-pyridylamino derivatives of N-glycans (PA-N-glycans). This is a kind of on-line, two-dimensional (2D) separation approach in hydrophilic-interaction chromatography (called the 2D-HILIC method), analogous to that of coupling cation- (or anion-, or mixed ion-) exchange and reversed-phase columns in hydrophobic interaction (reversed-phase) chromatography. The efficiency of the 2D-HILIC method was tested with biantennary neutral and sialylated PA-N-glycan standards by properly combining linear gradient elutions of water-acetonitrile and spiked-salt (ammonium acetate) elutions. The retention time RSDs of all the peaks in three sequential runs of a 100 min cycle are less than 0.52%, which indicates a reasonably good repeatability of the 2D-HILIC method. Then, the method was applied to a complex mixture of PA-N-glycans from human serum proteins. It was demonstrated that the neutral PA-N-glycans and mono-, di-, tri-, and tetrasialylated PA-N-glycans are able to be eluted in turn according to the number of sialic acids in an automated (programmed) single run.     

A reduction-triggered delivery by a liposomal carrier possessing membrane-permeable ligands and a detachable coating

To control the cellular uptake of drugs and genes, we synthesized a liposomal carrier possessing membrane-permeable ligands and a detachable poly(ethylene glycol) (PEG) coating. For the detachable coating, a lipid having a thiolytic cleavable spacer (PEG-S-S-DOPE) was synthesized by the reaction of dioleoylphosphatidylethanolamine (DOPE) with a PEG chain via a disulfide linkage. The liposomes were prepared from a mixture of dipalmitoylphosphatidylcholine (DPPC), DOPE, PEG-S-S-DOPE, and cholesteryl hemisuccinate (CHEMS). The octamer (R8 peptide) of arginine was chosen as the membrane-permeable ligand and covalently immobilized onto the CHEMS portion of the liposome surface (PEG-S-S-R8-liposome). The disulfide bond of the PEG chain was cleaved to display the R8 peptides on the liposome surface by adding a reducing agent such as L-cysteine, and thereby internalization of the liposomes was significantly facilitated. When L-cysteine was added to the mixture of cells and the liposome that incorporated plasmids encoding the enhanced green fluorescence protein (pEGFP), the expression of EGFP was low but could be observed in almost 100% of the cells.     

Nickel(II) oxide surface-modified titanium(IV) dioxide as a visible-light-active photocatalyst

The electronic modification of TiO(2) with highly dispersed NiO particles smaller than ca. 2 nm by the chemisorption-calcination-cycle technique has given rise to a high level of visible-light-activity exceeding that of iron oxide-surface modified TiO(2) simultaneously with the UV-light-activity being significantly increased.     

Synthesis of oligo(spiroketal)s by polycondensation of silyl ethers derived from naturally occurring myo‐inositol with 1,4‐cyclohexanedione

Oligo(spiroketal)s (OSKs) were synthesized from myo‐inositol, a naturally occurring cyclic compound bearing six hydroxyl groups. The successful synthesis of OSKs was achieved using silyl ethers 2 derived from 1,4‐di‐O‐alkylated myo‐inositol 1 as monomers, which underwent polycondensation with 1,4‐cyclohexanedione (CHD) at 0 °C in the presence of trimethylsilyl triflate as a catalyst. Because of the irreversible nature of the condensation reaction of silyl ethers with ketones, the resulting OSKs 7 had higher molecular weights than previously reported OSKs that were obtained by polycondensation of tetraols 1 with CHD, where backward hydrolysis of the ketal functions occurred. In addition, another series of OSKs, 8, were synthesized using silyl ethers 3 derived from 2,5‐di‐O‐alkylated myo‐inositol 6 , which are more symmetric monomers than silyl ethers 2 . Silyl ethers 3 underwent efficient polycondensation with CHD, whereas tetraol 6 did not, demonstrating that the derivation of such tetraols into the corresponding silyl ethers is a powerful strategy to access OSKs. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2407–2414     

Imaging mass spectrometry of gold nanoparticles in a tissue section as an immunohistochemical staining mass probe

For analysis of low abundance peptides in a tissue section, immunohistochemical staining through antibody‐antigen interaction is a usual technique. The antibody is conjugated with a probe moiety that aids in highly sensitive detection. Gold nanoparticles, which show excellent chemical stability and variation of surface modifications, are expected to act as a sensitive mass probe to desorb gold ions (Au⁺, Au₂⁺, Au₃⁺) that are distinguishable from fragment ions from organic molecules. Here, green fluorescent proteins (GFP) in a tissue section of a transgenic zebrafish were detected by the gold mass probe conjugated with antibodies. Due to the efficient ionization and desorption of gold ions, imaging mass spectrometry of Au₂⁺ ions indicated the distribution of gold nanoparticles stained in a tissue section, and the mass signal distribution was consistent with the area where the GFP‐expressing cells were distributed. Conventional immunofluorescence techniques showed intense autofluorescence that come from intrinsic fluorophores in the tissue section. In contrast, the gold nanoparticles acted as an immunostaining mass probe that displayed significantly lower background signals.