Improvement in flow-sheet of extraction chromatography for trivalent minor actinides recovery

Journal of Radioanalytical and Nuclear Chemistry - Extraction chromatography flow-sheet employing octyl(phenyl)-N,N-diisobutylcarbonoylmethylphosphine oxide and bis(2-ethylhexyl) hydrogen phosphate...     

Vacuum‐driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a rapid system response time

Recently, we developed a convenient microfluidic droplet generation device based on vacuum‐driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak‐to‐peak drive voltage (V_p‐p) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10‐V_p‐p increments over the range of 200?250 V_p‐p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50?60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic‐based applications.     

Theory of chemical bonds in metalloenzymes XXII: a concerted bond-switching mechanism for the oxygen–oxygen bond formation coupled with one electron transfer for water oxidation in the oxygen-evolving complex of photosystem II

ABSTRACT

QM(UB3LYP)/MM(AMBER) calculations were performed for the locations of the transition structure (TS) of the oxygen–oxygen (O–O) bond formation in the S₄ state of the oxygen-evolving complex (OEC) of photosystem II (PSII). The natural orbital (NO) analysis of the broken-symmetry (BS) solutions was also performed to elucidate the nature of the chemical bonds at TS on the basis of several chemical indices defined by the occupation numbers of NO. The computational results revealed a concerted bond switching (CBS) mechanism for the oxygen–oxygen bond formation coupled with the one-electron transfer (OET) for water oxidation in OEC of PSII. The orbital interaction between the σ-HOMO of the Mn(IV)₄–O₍₅₎ bond and the π*-LUMO of the Mn(V)₁=O₍₆₎ bond plays an important role for the concerted O–O bond formation for water oxidation in the CaMn₄O₆ cluster of OEC of PSII. One electron transfer (OET) from the π-HOMO of the Mn(V)₁=O₍₆₎ bond to the σ*-LUMO of the Mn(IV)₄–O₍₅₎ bond occurs for the formation of electron transfer diradical, where the generated anion radical [Mn(IV)₄–O₍₅₎]^-? part is relaxed to the ?Mn(III)₄?…?O₍₅₎^- structure and the cation radical [O₍₆₎=Mn(V)₁]⁺ ? part is relaxed to the ⁺O₍₆₎–Mn(IV)₁? structure because of the charge-spin separation for the electron-and hole-doped Mn–oxo bonds. Therefore, the local spins are responsible for the one-electron reductions of Mn(IV)₄->Mn(III)₄ and Mn(V)₁->Mn(IV)₁. On the other hand, the O₍₅₎^- and O₍₆₎⁺ sites generated undergo the O–O bond formation in the CaMn₄O₆ cluster. The Ca(II) ion in the cubane- skeleton of the CaMn₄O₆ cluster assists the above orbital interactions by the lowering of the orbital energy levels of π*-LUMO of Mn(V)₁=O₍₆₎ and σ*-LUMO of Mn(IV)₄–O₍₅₎, indicating an important role of its Lewis acidity. Present CBS mechanism for the O–O bond formation coupled with one electron reductions of the high-valent Mn ions is different from the conventional radical coupling (RC) and acid-base (AB) mechanisms for water oxidation in artificial and native photosynthesis systems. The proton-coupled electron transfer (PC-OET) mechanism for the O–O bond formation is also touched in relation to the CBS-OET mechanism.     

Compulsorily Phase Locked Interferometer Using Orthogonally Polarized Light Source of a Modulated LD with High Extinction Ratio

This paper describes a compulsorily phase locked differential interferometer using an orthogonally polarized light source of a modulated LD with high extinction ratio to reduce non-linearity of the interferometer caused by polarization cross-talk. The current modulated LD is used as a light source to make the interferometer compact and for the scanning phase of the interferometer. The interferometer is operated compulsorily at the maximum inclination point of the fringe intensity curve by fringe scanning and an electric system. A Wollaston prism of high extinction ratio (50 dB) is used to combine the polarizing beams and to make the polarization cross-talk very small. In one light source the polarized output beams are on the same propagation axis; in the other they have a small crossing angle (2.5 mrad ∼ 10 mrad) to completely exclude non-linearity of the interferometer causded by polarization cross-talk. Using jets of a gas mixture of nitrogen and ethylene, this interferometer was demonstrated to be useful in detecting the photothermal effect of a photothermal velocimeter under phase fluctuation in a turbulent flow.     

χ polarization induced in molecular glass of conjugated compound by all-optical poling

The paper presents the first report on χ⁽²⁾ polarization induced in molecular glass of conjugated compound by all-optical poling. Transparent thin film of molecular glass of 1,4-bis[2-[4-[N,N-di(p-tolyl)amino]phenyl]vinyl]benzene (BTAPVB) was prepared using a spin-cast technique. Dipolar as well as octupolar components in BTAPVB contributed to the formation of photoinduced χ⁽²⁾ polarization. Growth rate of χ⁽²⁾ polarization has good linear relation with E_ω⁴E_2ω, which suggested that the simultaneous processes of two-photon (ω + 2ω) and three-photon (ω + ω + ω) excitation on the same electronic level contributed to the formation of photoinduced χ⁽²⁾ polarization.     

Almost Hermitian structures induced from a Kähler structure which has constant holomorphic sectional curvature

We obtain a non-Kähler almost Hermitian manifold of constant holomorphic sectional curvature by changing the almost complex structure in a Kähler manifold of constant holomorphic sectional curvature.

     

New Chiral Kemp's Acid Diamides for Chiral Amine Recognition by 1 H NMR

Two Kemp's acid diamides were synthesized and applied to chiral amine recognition using ¹H NMR analysis. One derivative based on 1-(1-naphthyl)ethylamine had good chiral recognition of six amines and was useful to determine the optical purity for three amines, i.e., methylbenzylamine, 1-(1-naphthyl)ethylamine and 1- henylpropylamine,however, the cyclohexylethylamine derivative showed little discrimination for the amines studied. Together with the results for alkylamines, it was shown that aromatic structure was important for aromatic shielding anisotropy and –– interactions between host and guest. The structure of the 1-(1-naphthyl)ethylamine derivative in solution was also considered based on ¹H NMR data and computer simulation.     

Polymerization of vinyl acetate in fatty acids and properties of poly (vinyl alcohols) derived from the poly (vinyl acetates)

Polymerization of vinyl acetate (VAc) in various fatty acids (carbon numbers 4–18) was carried out. Chain transfer constants to the acids were determined to be 20–35×10^–4, from which the constant to a methylene group was obtained to be 0.73×10^–4. Viscometry in aqueous solution of derived poly (vinyl alcohol) (PVA) showed the usual behavior in terms of Huggins constant obtained by the Schulz–Blaschkes equation for PVAs derived from fatty acid systems lower than hexadecanoic acid. PVA derived from octadecanoic acid system showed abnormality, indicating association of alkyl groups. Contact angles on surfaces of PVAs cast from aqueous solutions were measured. While those of PVA derived from lower acid systems were 62°, those of PVAs derived from higher aids were higher and increased to 92° with increase in carbon number to octadecanoic acid. Alkyl groups in the PVAs were estimated to appear on the surfaces. Surface tension of aqueous solution of the PVA derived from octadecanoic acid showed high surface activity, and depended on pH of the solution, indicating the presence and cleavage of lactone ring at the combined portion between PVA and the acid.     

Single-Microparticle Injection and Microabsorptiometry: Direct Analysis of Sorption Processes

Sorption processes of methylene blue in a single silica gel microparticle in an aqueous solution was kinetically analyzed by a new technique combined with the microcapillary injection/manipulation and microabsorptiometry of the single particle. The observed sorption rates were analyzed in terms of the solute concentration in water and the particle size. The sorption processes were governed by diffusion of the solute in the particle. Copyright 2000 Academic Press.     

Interpretation of structure formation during the sol-gel transition of a resorcinol-formaldehyde solution by population balance

Growth of colloidal particles formed during the sol-gel transition of a resorcinol-formaldehyde (RF) solution was simulated based on the population balance equation by using the discrete-sectional model (DSM). During the early stage of the sol-gel transition, the transient change of sizes of colloidal particles estimated by this method agreed well with the previous experimental observation by dynamic light scattering (DLS), which confirmed the influence of the catalyst concentration of a starting RF solution on the growth rate of the particles. From the size distribution of colloidal particles predicted at the gelation time, the surface area of a RF hydrogel after the completion of the sol-gel transition was estimated, which coincided with the BET surface area of a RF aerogel because the porous structure of a hydrogel was maintained and few micropores were formed during supercritical drying.