Effect of the pore surface modification of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes

We have investigated the effect of the surface state and surface treatment of the pores of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes. Shirasu porous glass (SPG) was used as the inorganic substrate, and methyl acrylate was used as the grafting monomer. The grafting rate increased as the density of silanol on the SPG substrate increased. This result suggests that radicals are generated mainly at the silanol groups on the pore surface by plasma irradiation. The SPG substrates were treated with silane coupling agents used to control the mass of organic material bonded to the pore surface. The thickness of the grafted layer became thinner as the mass of organic material bonded to the pore surface of SPG increased. This decrease in the thickness of the grafted layer could be explained by the decrease in the penetration depth of vacuum ultraviolet rays contained in plasma having a wavelength of less than 160 nm that generated radicals in the pores of the substrate. The thickness of the grafted layer inside the SPG substrates could be controlled through the control of the mass of organic material bonded to the pore surface of the SPG substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 846–856, 2006     

Lewis acid promoted reactions of γ,γ-dialkoxyallylic zirconium species with various carbonyl compounds

The reactions of γ,γ-dialkoxyallylic zirconium species with carbonyl compounds in the presence of Lewis acid are reported. The reactivity of γ,γ-dialkoxyallylic zirconium species and reaction pathway were strongly dependent on the structure and electrostatic nature of the carbonyl compounds.     

Condensed thienopyrimidines. II. Synthesis and gastric antisecretory activity of thiazole and polymethylene condensed thienopyrimidine derivatives

Thiazolo[3,2-a]thieno[3,2-d]-, [3,4-d]- and [2,3-d]pyrimidin-5-one derivatives (6, 11 and 16), and polymethylene condensed thieno[3,2-d]-, [3,4-d]- and [2,3-d]pyrimidin-5-one derivatives (19-21), in which the oxygen atom of the oxazolidine moiety in 3 was replaced by a sulfur atom or methylene groups, were synthesized and evaluated for gastric antisecretory activity in pylorus-ligated rats. The structure-activity relationships of these compounds are discussed.     

Synthesis and photochemical properties of photoactivated antitumor prodrugs releasing 5-fluorouracil

A new family of antitumor prodrugs (1-3) of 5-fluorouracil (5-FU) possessing photolabile 2-nitrobenzyl chromophores have been designed and synthesized to investigate the efficiency and mechanism of photoactivated 5-FU release upon UV-irradiation at lambda(ex)= 365 nm. The photoactivated prodrug 3 derived from conjugation of 2 with a tumor-homing cyclic peptide Cys-Asn-Gly-Arg-Cys (CNGRC) was so designed as to manifest a tumor-targeting function.     

Simultaneous polymerization and formation of polyacetylene film on the surface of concentrated soluble Ziegler-type catalyst solution

A direct method of simultaneously polymerizing and forming acetylene monomer to produce uniformly thin films of polyacetylene was investigated in terms of catalyst system, catalyst concentration, and polymerization temperature. The best catalyst was a Ti(OC₄H₉)₄–Al(C₂H₅)₃ system (Al/Ti = 3–4) and the critical concentration was 3 mmole/l. of Ti(OC₄H₉)₄. Below the critical concentration, only a solid or a powder was obtained. The configuration of the polymers obtained depends strongly upon the polymerization temperature. Thus an all-cis polymer was obtained at temperatures lower than ?78°C, whereas an all-trans polymer resulted at temperatures higher than 150°C. Observations either in an electron microscope by direct transmission or in a scanning electron microscope showed that the film is composed of an accumulation of fibrils about 200–300 Å in width and of indefinite length.     

Electron spin resonance study of polymerization of butadiene with tris(acetylacetonato)titanium and triethylaluminum

ESR spectra of homogeneous catalyst derived from tris(acetylacetonato)titanium(III) and triethylaluminum were observed at several temperatures from ?78°C, to +25°C, at molar ratios of aluminum to titanium of 1–108. At ?78°C, this catalyst yields a violet complex which shows an ESR signal with a g value of 1.959 and is associated with the first intermediate. At ?40°C to ?30°C, this signal decreases, and two signals with g values of 1.947 and 1.960 are observed. The latter two signals diminish at ?5°C to +10°C, while two kinds of new signals with g values of 1.965 and 1.969 appear overlapping each other. The structures of the species corresponding to these five signals are discussed on the basis of the ESR spectra, the intensity change, and the unpaired spin distribution. A new signal with a g value of 1.978 is found in the presence of butadiene at 25°C at Al/Ti > 8 and is assigned to a growing end of polybutadiene with this catalyst. The polymer yield increases remarkedly at Al/Ti molar ratios greater than 10. The microstructure of the resulting polymer consists almost completely of 1,2 units. The structure of the growing end is proposed to be a titanium (III) species containing two 1-substituted allyl groups, by comparison with the structure ascribed to the growing end of polybutadiene with n-butyl titanate-triethylaluminum catalyst.     

The S2 emission characteristics of several organic sulfur compounds obtained by molecular emission cavity analysis and pyrolysis

Emission profiles of several organic sulfur compounds are investigated by modified molecular emission cavity analysis (MECA). Thiourea, 1,3-diethylthiourea, S-methyl- cysteine and taurine are pyrolyzed in a hydrogen stream and the pyrolytic products are determined by gas chromatography. The S₂ emission mechanism is discussed on the basis of emission profiles and the composition of the pyrolytic products. Although some compounds give multipeaked responses, the splitting disappears when a worn surface cavity is used or oxalic acid is added to the sulfur compound in the cavity. When the emission profile from thiourea is compared with that from 1,3-diethylthiourea, it is clear that the multipeaked response is due to quenching by degradation products of the latter compound. The main product of pyrolysis is hydrogen sulfide. The emission intensity is related to the yield of hydrogen sulfide in pyrolysis. As methylmercaptan was not detected in the pyrolysis products, it is suggested that the quenching by the organic fragments results from their hydrogen consumption rather than their reaction with sulfur species. The S₂ emission from sulfur-containing compounds is rapidly complete in the presence of oxalic acid, and it is suggested that such compounds are subject to reductive breakdown in the cavity.     

Chiral ligand-controlled asymmetric conjugate addition of lithium amides to enoates

The external chiral ligand-controlled asymmetric conjugate addition reaction of lithium amides with alpha,beta-unsaturated esters provided beta-amino esters in high yields and high enantioselectivities.     

Synthesis and polymerization of 4-o-vinylbenzyl-2,2,6,6-tetramethylpiperidine

Some hindered amine polymers containing 2,2,6,6-tetramethylpiperidine structure were synthesized. A new monomer, 4-O-vinylbenzyl-2,2,6,6-tetramethylpiperidine, was homopolymerized and copolymerized with some vinyl monomers in the presence of AIBN as an initiator. The obtained amine polymers were oxidized with hydrogen peroxide to obtain the polymers having nitroxyl radical moiety.     

Reversal of diastereofacial selectivity in the intramolecular michael addition of -α-carbamoyloxy-α,β-unsaturated esters. Synthesis of N-benzoyl-D,L-daunosamine

Contrary to the precedents, 1,3-anti stereoselection was found in the intramolecular Michael addition of ethyl $\text{threo}$,5-carbamoyloxy-4-trialkylsilyloxy-2-hexenoate to culminate in a synthesis of N-benzoyl-$\text{D}$,$\text{L}$-daunosomine. The antiperiplanar effect due to the group at 4-position was revealed to play a major role in the stereoselection in this type of reactions. N-benzoyl-$\text{D}$,$\text{L}$-3-epidaunosamine was also synthesized by 1,2-syn asymmetric induction.