Electrical properties and memory effect in the field effect transistor based on organic ferroelectric insulator and pentacene

We have fabricated a field effect transistor (FET) based on an organic ferroelectric insulator and molecular conductor, and investigated the electrical properties and memory effects on the PEN-FET. We have observed a drastic change in the drain current at around the coercive electric fieldE _c of the organic ferroelectric insulator in not only a FET (PEN-FET) based on a pentacene (PEN) film but also a FET (IPEN-FET) based on an iodine doped PEN film. The magnitude of the change of the drain current for the IPEN-FET is 200 times larger than that for the PEN-FET. It is expected from these results that the PEN-FET (especially the IPEN-FET) is an improvement in such devices, since it operates at a low gate electric field accompanied by the appearance of the spontaneous polarization in the organic ferroelectric insulator. In addition, we have found that the drain current for the PEN-FET does not return to the initial drain current ofE _G =0 V/cm for more than one week, even if the gate electric field is changed to 0 V/cm from 500 V/cm(>E _c ). From these results, it is suggested that the PEN-FET becomes a memory device.     

Uptake and excretion of total inorganic arsenic by the freshwater alga Chlorella vulgaris

Arsenic-tolerant freshwater alga Chlorella vulgaris which had been collected from an arsenicpolluted environment were tested for uptake and excretion of inorganic arsenic. Approximately half the quantity of arsenic taken up by C. vulgaris was estimated to be adhered to the extraneous coat (10 wt %) of the cell. The remainder was bioaccumulated by the cell. Both adhered and accumulated arsenic concentrations increased with an increase in arsenic(V) concentration of the aqueous phase. Arsenic(V) accumulation was affected by the growth phse: arsenic was most actively accumulated when the cell was exposed to arsenic during the early exponential phase and then accumulation decreased with an increase in culture time exposed to arsenic. The alga grew well in the modified Detmer (MD) medium containing 1 mg As(III) dm^?3 and the growth curve was approximated by a ‘logistic equation’. Arsenic(III) was accumulated up to the second day of the culture time and arsenic(III) accumulation decreased with an increase in the culture time after that. Arsenic accumulation was also largely affected by various nutrients, especially by managanese, iron and phosphorus compounds. A modified MD medium with the three nutrients was proposed for the purpose of effective removal of arsenic from the aqueous phase. Using radioactive arsenate (Na₂H⁷⁴AsO₄), the arsenic accumulated was found to be readily excreted under conditions which were unfavourable for the multiplication of C. vulgaris.     

Time-resolved cavity ringdown spectroscopy on nanoparticle generation in a SiH4–H2 VHF plasma

Time-resolved cavity ringdown (τ-CRD) spectroscopy has been applied to monitor the silyl (SiH₃) radicals and nanoparticles in a pulsed very high frequency (VHF) silane-hydrogen plasma under microcrystalline silicon (μc-Si:H) deposition conditions. The measured cavity loss reveals four time intervals (I up to VI) in the first 4 s of the plasma pulse. By variation of the laser wavelength, it is demonstrated that the small cavity loss at 220 nm reflects the SiH₃ absorption in interval I. In intervals II and III, an additional cavity loss appears. This additional cavity loss corresponds to Rayleigh and Mie scattering by growing nanoparticles. Interval IV reflects the loss of nanoparticles between the electrodes during the afterglow of the plasma pulse. The evolution of the nanoparticle generation determined from the τ-CRD measurements are further confirmed by additional scanning electron microscopy analyses on the nanoparticles created in the plasma pulse.     

Microchannel-assisted thermal-lens spectrometry for microchip analysis

We present a new method for homocysteine quantitation in human plasma based on in-capillary reaction of homocysteine with 2,2′-dipyridyl disulfide. Homocysteine is in this so-called thiol-exchange reaction quantitatively transformed in mixed disulfide concomitantly with formation of an equimolar amount of 2-thiopyridone that is further separated by micellar electrokinetic chromatography and determined specifically at 343 nm. The concentration of homocysteine is thus estimated indirectly from the result of 2-thiopyridone determination. The linear detection range for concentration versus peak area for the assay was from 0.03–3 mM (correlation coefficient 0.994) with a detection limit of 6 μM and a limit of quantitation 20 μM. The inter-day reproducibility of the peak area and the migration time were 1.37% and 0.05%, respectively. The method is simple, relatively rapid and can be easily automated. Moreover the common capillary electrophoresis apparatus with a UV detector can be used to distinguish between normal and pathological hyperhomocysteinemia plasma samples.     

Synthesis of poly(vinylene-arsine)s: alternating radical copolymerization of arsenic atomic biradical equivalent and phenylacetylene

Novel organoarsenic polymers, poly(vinylene-arsine)s, were synthesized by a free-radical alternating copolymerization of phenylacetylene with cyclooligoarsines as an atomic biradical equivalent. The polymerization between pentamethylpentacycloarsine (1a) or hexaphenylhexacycloarsine (1b) with phenylacetylene (2) in the presence of a catalytic amount of AIBN (in benzene; refluxing; for 12 h) gave the corresponding poly(vinylene-arsine)s. The obtained polymers were soluble in common organic solvents such as THF, chloroform, and benzene. From gel permeation chromatographic analysis (chloroform, PSt standards), the number-average molecular weights of the polymers from 1a and 1b were found to be 11500 and 3900, respectively. The structures of the polymers were supported by 1H and 13C NMR spectroscopies. The corresponding polymer was also obtained by irradiation of a benzene solution of 1a and 2 with xenon lamp at room temperature. After the polymer from 1a was stirred vigorously with 30% H2O2, the 1H NMR spectrum of the polymer showed the methyl proton that was assigned to As(III)-Me, suggesting the insensitivity of the trivalent state arsenic in the main chain to the oxidation. The structures and the molecular weights of the polymers were insensitive to the feed ratio of the monomers. This result indicates that the addition of the arsenic radical to phenylacetylene was a rate-determining step in the copolymerization.     

Decomposition of Co2TiO4 spinel below 1000 K

Co₂TiO₄ spinel was found to decompose to the mixture of CoTiO₃ ilmenite and Co₃O₄ spinel below 1000 K. The decomposition rate was the larger for the sample ground for the longer period. It showed a maximum around 870–920 K which seemed to appear from the balance between the rate increase by diffusion and the decrease of nucleation probability with temperature. The thermodynamical consideration supported the experimental results.     

Synthesis and ion selectivity of macrocyclic metacyclophanes analogous to spherand-type calixarenes

Novel macrocyclic compounds, hexahydroxy[1.0.1.0.1.0]- (2b) and octahydroxy[1.0.1.0.1.0.1.0]metacyclophane (2c) have been prepared in 50–70% yield by base-catalyzed condensation of 5,5-di-tert-butyl-2,2-dihydroxybiphenyl (1) with formaldehyde in refluxing xylene. An attempted alkylation of the flexible macrocycles2b and2c with ethyl bromoacetate in the presence of Cs₂CO₃ under acetonitrile reflux gave only one pure stereoisomer3 and4, respectively, while other possible isomers were not observed. The structural characterization of these products is also discussed. The two-phase solvent extraction data indicated that hexaethyl ester3 and octaethyl ester4 show strong metal affinity, comparable with that of the corresponding calix[n]arenes, and a high K⁺ selectivity was observed for octaethyl ester4.¹H-NMR titration of hexaethyl ester3 and octaethyl ester4 with KSCN clearly demonstrate that a 11 complex is formed which is stable on the NMR time scale.This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.     

Molecular Recognition Study on a Supramolecular System. Part 21. Inclusion Complexation Thermodynamics of Aliphatic Alcohols by Organoselenium Modified β-Cyclodextrins

The spectrophotometric titrations have beenperformed at 25–40 °C in aqueous solution to give the complexstability constants and the thermodynamic parametersfor the stoichiometric 1 : 1 inclusion complexation ofvarious aliphatic alcohols withmono[6-(phenylseleno)-6-deoxy]--cyclodextrin (2),mono[6-(o-, m-,p-tolylseleno)-6-deoxy]--cyclodextrin (3–5),mono[6-(p-chloro-phenyl-seleno)-6-deoxy]--cyclodextrin(6), mono[6-(benzylseleno)-6-deoxy]--cyclodextrin (7) and mono[6-(naphthaleneseleno)-6-deoxy]--cyclodextrin(8). On thebasis of the present and previous results, themolecular binding abilities and selectivities forguest aliphatic alcohols of the host -cyclodextrinderivatives (2–8) are discussed comparatively and globallyfrom the thermodynamic point of view. Thethermodynamic parameters obtained are criticalfunctions of the size/shape of aliphatic alcohols, andthe position and type of the substituent introduced tothe aromatic ring of -cyclodextrin's sidearm,which are elucidatedin terms of the conformational, electrostatic,hydrogen-bonding, and hydrophobic effects.     

Bound site of Mo atoms and its local structure in a Mo/HY catalyst characterized by extended X-ray absorption fine structure and density functional calculation

The bound site of Mo atoms and its local structure in a Mo/HY catalyst have been determined by detailed analysis of extended X-ray absorption fine structure (EXAFS). Molybdenum was introduced in the supercage of HY zeolite by cycles of saturated adsorption of Mo(CO)6 at room temperature and subsequent thermal decomposition at 573 K. Two Mo atoms per supercage were immobilized in each CVD-thermal treatment cycle. The Mo loading increased linearly with the cycles up to three cycles at saturation, where six Mo atoms were supported. Temperature-programmed decomposition of the adsorbed Mo(CO)6 was also characterized by GC, QMS, and FT-IR, respectively. The EXAFS analysis including multiple scattering based on theoretical calculations revealed that Mo bound with two oxygen atoms connects to Al, where one of the two oxygen atoms had been associated with a proton. The bound site is called the S(III)' site. The zeolite framework was significantly distorted by the introduction of low-valent Mo, resulting in isolation of the [MoO2Al] unit from the surrounding zeolite framework due to a quasi-disruption of Si-O bonds adjacent to the unit. In the mild oxidation of the low-valent Mo/HY sample two Mo=O bonds were newly formed and the position of Mo was displaced by 0.06 nm so that the distortion of zeolite framework around the Al atom was relieved. The structures were also supported by DFT calculations. This study is the first example that the position of metal cation in zeolite was determined unambiguously by the EXAFS analysis.