Schottky metal library for ZNO-based UV photodiode fabricated by the combinatorial ion beam-assisted deposition

A binary alloy Schottky barrier diode on zinc oxide (ZnO) was developed using the combinatorial ion beam-assisted deposition system. The compositional fraction of the binary alloy was continuously varied using the composition-spread technique, to control the Schottky barrier height. After metal deposition, patterned Schottky diodes were fabricated on a ZnO single-crystal substrate. Pt-Ru alloy was selected from the work function viewpoint. Our experiments showed that the compositional fraction of the Schottky binary alloys changed continuously as designed and the Schottky barrier heights measured by current-voltage (I-V) measurements increased with increasing Pt content. Maximum barrier height difference for ZnO was 137 meV. Using ion beam deposition in parallel with the combinatorial system showed that the Schottky barrier heights for ZnO can be controlled by binary metal alloying.     

Peroxyoxalate chemiluminescence detection of condensates of malondialdehyde with thiobarbituric acids using a flow system.

The peroxyoxalate chemiluminescence(CL) detection method for the evaluation of the CL intensity of malondialdehyde(MDA) condensates with seven 2-thiobarbituric acid derivatives is described. The method consists of a flow injection technique together with a CL detection system using bis(2,4,6-trichlorophenyl) oxalate(TCPO) and hydrogen peroxide as chemiluminogenic reagents. Linear correlations between CL intensity and concentration are obtained for pmol levels of condensates. Among the condensates, 1,3-diethyl-2-thiobarbituric acid(DETBA)-MDA shows the largest CL intensity. High performance liquid chromatography (HPLC)/CL detection of DETBA-MDA and 1,3-diphenyl-2-thiobarbituric acid(DPTBA)-MDA using a mixture of TCPO and hydrogen peroxide in acetonitrile as a postcolumn reagent solution is also described. The detection limits for DETBA-MDA and DPTBA-MDA are 20 and 200 fmol, respectively, per 20 microL injection at a signal-to-noise ratio of 2. This HPLC/CL detection system was applied to the determination of MDA in rat brains by using DETBA as a fluorescent derivatizing reagent.     

Novel acyl alpha-pyronoids, dictyopyrone A, B, and C, from Dictyostelium cellular slime molds

For the elucidation of the diversity of secondary metabolites of Dictyostelium cellular slime molds, we investigate the constituent of three species of slime molds. From the methanol extract of their fruit bodies, we obtained three novel compounds, dictyopyrone A (1) and B (2) from D. discoideum and D. rhizoposium and dictyopyrone C (3) from D. longosporum. They possess a unique alpha-pyrone moiety with a side chain at the C-3 position. Their relative structures were elucidated by spectral means, and the absolute configuration was confirmed by asymmetric synthesis of 1. Since these compounds were obtained from different species of Dictyostelium slime molds, they may be a type of compound common to this genus.     

Structure-activity relationship (SAR) studies on oxazolidinone antibacterial agents. 1. Conversion of 5-substituent on oxazolidinone

A structure-activity relationship (SAR) study on 5-substituted oxazolidinones as an antibacterial agent is described. The oxazolidinones, of which 5-acetylaminomethyl moiety was converted into other functions, were prepared and evaluated for antibacterial activity. Elongation of the methylene chain (8) and conversion of the acetamido moiety into guanidino moiety (12) decreased the antibacterial activity. The replacement of carbonyl oxygen (=O) by thiocarbonyl sulfur (=S) enhanced in vitro antibacterial activity. Especially, compound 16, which had the 5-thiourea group, showed 4-8 stronger in vitro activity than linezolid. Our SAR study revealed that the antibacterial activity was greatly affected by the conversion of 5-substituent.     

Iron-metal multilayers studied by Mössbauer spectroscopy,RBS and X-ray diffraction

Fe/M (M = Ag, Zn and Sn) multilayers prepared by a vacuum evaporation method are studied by Mössbauer spectroscopy (MS), Rutherford backscattering spectroscopy (RBS) and X-ray diffraction (XRD). For the case of an M = Ag multilayer, MS reveals that Fe in the multilayer remains as an-phase down to the layer thickness of 10 nm. This result is in agreement with the RBS result that Fe and Ag form a completely discrete layer structure without any mutual mixing. For the case of M = Zn and Sn, RBS reveals that a considerable mixing has taken place between Fe and Sn during the specimen preparation. MS on Fe/Sn specimens with different layer thickness shows that an alloy phase of about 5 nm thickness is formed at the interface. Structural as well as magnetic properties of the alloy phase are discussed based on MS at different temperatures and on reported results of the intermetallic compound FeSn.     

Dynamic dendrimer at electrified interface: potential dependent adsorption-desorption and reorientation of a 4-pyridyl-modified PAMAM dendrimer

Potential-dependent dynamic adsorption-desorption and reorientation of a 4-pyridyl modified PAMAM G2 dendrimer at a Au(111) electrode has been demonstrated.     

Transition metal-catalyzed olefin arylation via C–H bond activation of arenes

In this article, two kinds of our transition metal-catalyzed olefin arylations are summarized and discussed. The first one is Ir-catalyzed novel anti-Markovnikov hydroarylation of olefins with benzene. Using this reaction catalyzed by [Ir(μ-acac-O,O′,C₃)(acac-O,O′)(acac-C₃)]₂ (acac = acetylacetonato), 1, straight-chain alkylarenes, which were not obtainable by the conventional Friedel-Crafts aromatic alkylation with olefins, were able to be successfully synthesized directly from arenes and olefins with the higher selectivity than that of branched alkylarenes. This is the first efficient catalyst which shows the desirable high regioselectivity. The reaction of benzene with propylene gave n-propylbenzene and cumene in 61% and 39% selectivities, respectively, and the reaction of benzene and styrene afforded 1,2-diphenylethane in 98% selectivity. The reaction of alkylarene and olefin showed meta and para orientations. A wide range of olefins and arenes can be employed for the synthesis of alkylarenes. The mechanism of the reaction involves C–H bond activation of benzene by Ir center to form Ir–phenyl species. The second reaction is Rh-catalyzed oxidative arylation of ethylene with benzene to directly produce styrene, namely one-step synthesis of styrene. The reaction of benzene with ethylene catalyzed by Rh(ppy)₂(OAc) (ppyH = 2-phenylpyridine, OAc = acetate), 3 with Cu oxidizing agent gave styrene and vinyl acetate in 77% and 23% selectivities, respectively, in contrast to those by Pd(OAc)₂, 47% of styrene and 53% of vinyl acetate. The mechanism of the reaction involves Rh-mediated C–H bond activation of benzene, which appears to be a rate-determining step. Furthermore, Rh complexes in a Rh(I) oxidation state at the beginning of the reaction work as catalysts for the reaction by addition of acacH and O₂ without any oxidizing agent, like Cu salt.     

An unusual twist conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol

The ring conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol was in a twist form both in solid state and in solution. This is the first observation of a stable twist conformer induced by the introduction of bulky silyl protecting groups.