Cyanide-Free One-Pot Synthesis of Methacrylic Esters from Acetone

Methacrylic esters, represented by methyl methacrylate (MMA), are widely used as commodity chemicals. Here, the one-pot synthesis of methacrylic esters from acetone, a haloform and alcohols in the presence of an organic base is described. Using DBU as the organic base for the reaction of acetone, chloroform and methanol in acetonitrile afforded MMA in 66 % yield. When the solvent was replaced by benzonitrile, the product MMA was successfully purified by distillation. Applicability of this process to various alcohols was also investigated to show ethyl, phenyl, CF₃CH₂, and n-C₆F₁₃CH₂CH₂ esters were obtained in moderate yields. The use of bromoform instead of chloroform resulted in the improvement of the yield, for example, methyl and n-C₆F₁₃CH₂CH₂ esters up to 81 and 70 %, respectively. The reaction with deuterated starting materials acetone-d₆ and MeOH-d₄, with DBU in acetonitrile afforded deuterated MMA (MMA-d₈) in 70 % yield.     

Charge density study under high pressure

The experimental and analytical method of the high-pressure powder experiment at BL10XU, SPring-8, is described. There is no doubt that BL10XU must be one of the most appropriate beam lines for high pressure X-ray diffraction experiment taking advantage of third generation synchrotron source. As an example of the advanced charge density study under high pressure, the structural change of Cs₂Au₂Br₆ by applying pressure is studied by Rietveld/MEM analysis. It reveals that the structural change of Cs₂Au₂Br₆ by applying pressure occurs basically at electron level, such as valence state change and chemical bonding, which may be called the electronic phase transition.     

Dicationic ((−)-sparteine)palladium-catalyzed enantioselective aldol reaction of aldehydes with 1-phenyl-1-trimethylsilyloxyethene, proceeding via a palladium enolate

A dicationic ((−)-sparteine)palladium complex underwent a superior catalytic enantioselective aldol reaction of aldehydes with 1-phenyl-1-trimethylsilyloxyethene performing satisfactorily, starting with ((−)-sparteine)PdCl₂ and AgSbF₆ as catalyst precursors (1 mol % loading) in the presence of 3 Å molecular sieves over the reaction.     

Reduction of dislocation density and improvement of optical quality in ZnO layers by MgO-buffer annealing

Optical properties of ZnO thin films with/without MgO-buffer annealing were investigated by low and room temperature photoluminescence measurements. The ZnO films were grown on c-sapphire substrates by plasma-assisted molecular-beam epitaxy employing a thin MgO-buffer layer. Dislocation density of ZnO layer was reduced from 5.3 × 10⁹ to 1.9 × 10⁹ cm⁻² by annealing MgO-buffer prior to the growth of ZnO. The intensity of free exciton emission from the sample with MgO-buffer annealing was almost twice of that from the sample without annealing, while the deep level emission from the sample with MgO-buffer annealing was about 1/3 of that without annealing. The MgO-buffer annealing improves optical quality of overgrown ZnO films.     

Phase transitions of lanthanide monophosphides with NaCl-type structure at high pressures

Lanthanide monophosphides LnP (Ln = La, Ce, Pr, Nd, Sm, Gd, Tb, Tm and Yb) with a NaCl-type structure have systematically been prepared at high temperatures. Using synchrotron radiation, X-ray diffractions of LnP have been studied up to 61 GPa at room temperature. The NaCl---CsCl transition for CeP is found at around 25 GPa. First-order phase transitions of LnP (Ln = La, Pr and Nd) with the crystallographic change occur at around 24, 26 and 30 GPa, respectively. The structure of the high pressure phases of these phosphides is a body center tetragonal structure (Ln: 0, 0, 0; P: 1/2, 1/2, 1/2; space group P4/mmm), which can be seen as the distorted CsCl-type structure. The Pr---P distance in the high pressure form of PrP is 2.789 Å. This almost agrees with the sum of covalent radii of Pr and P. The Pr---P bond has the covalent character at very high pressures. Similar results are also obtained for LaP and NdP. The pressure-induced phase transitions of SmP, GdP, TbP, TmP and YbP occur at around 35, 40, 38, 53 and 51 GPa, respectively. The structure of the high pressure phase is unknown. The phase transitions of LnP with many f-electrons are not due to the mechanism of the ordinary NaCl---CsCl transition. The transition pressures of LnP increase with decreasing the lattice constants in the NaCl-type structure, which decrease with increasing atomic number of the lanthanide atoms.     

Gas chromatography of bile acids as their hexafluoroisopropyl ester-trifluoroacetyl derivatives.

Bile acids, such as cholic, chenodeoxycholic, deoxycholic, lithocholic and ursodeoxycholic acids, were allowed to react with hexafluoroisopropanol and tri-fluoracetic anhydride at 37 for 30 min. The resulting derivatives were gas chromatographed on QF-1, with flame ionization detection, and were identified by gas chromatography-mass spectrometry. Separation was good. By using this method, these acids were detected in samples of human duodenal fluid; the ratios of each were 24.4, 41.5, 24.9, 2.3 and 6.9%, respectively.     

Cu-Chelex as a selective adsorbent for o-nitroso derivatives of phenolic substances

Summary Chelex resins in several metal forms were tested for selective uptake of o-nitrosonaphthols and o-nitrosophenols from aqueous solution. Cu-Chelex was the most efficient resin over a wide pH range, and the taken-up nitroso compounds were effectively eluted with concentrated ammonia: acetonitrile (4:1, v/v) after washing the resin with acetonitrile to eliminate non-specific binding. The upper and lower limits of uptake capacity of the resin for 1-nitroso-2-naphthol were 0.5 mol/100 mg and 1.25 mol/100 mg, respectively. A preliminary recovery experiment using urine and cucumber juice showed that Cu-Chelex would be useful for screening of o-nitroso derivatives of phenolic substances in complicated samples such as biological fluids and foods.     

Elongation and contraction of molecular springs. Synthesis, structures, and properties of bridged [7]thiaheterohelicenes

A series of bridged [7]thiaheterohelicenes 3a-c and 4 with a variety of helical pitches have been prepared from racemic and optical pure 2,13-bis(hydroxymethyl)dithieno[3,2-e:3',2'-e']benzo[1,2-b:4,3-b']bis[1]benzothiophene (1) in order to investigate the helical structures in solution. Recrystallizations of (PM)-3a, (PM)-3b, (PM)-3c, and (P)-4 from hexane-dichloromethane gave crystals suitable for X-ray crystallography, while recrystallization of (PM)-4 with benzene gave an inclusion complex with a stoichiometry of (PM-4)(4).(C(6)H(6)). X-ray analyses of (PM)-3a-c, (PM-4)(4).(C(6)H(6)), and (P)-4 indicate that the dihedral angles between terminal thiophene rings of the helical framework significantly vary from 22 degrees for 4 to 59 degrees for 3c. This represents as increase of 37 degrees or 168%. Although the (13)C NMR and UV absorption spectra of bridged helicenes 3a-c and unbridged helicene 5 are essentially the same, the molar rotation of 5 is very large compared with those of 3a-c and 4. A red shift (15 nm) in the circular dichroism (CD) spectrum is observed for 4, suggesting that this compound is more planar than 3a-c in solution. In the series of [7]thiaheterohelicenes studied, the minimum helical pitch is 2.70 A for 4.     

A lithiation approach to cordycepin analogues variously substituted at the C-8 position

Several 8-substituted cordycepins were prepared via LDA lithiation of 2′,5′-bis-O-(t-butyldimethylsilyl)-cordycepin and successive reactions of its C-8 lithiated species with various types of electrophiles. Wittig reaction of the 8-formyl derivative was also examined.     

Synthesis of (±)-ascochlorin,an antiviral antibiotic

(±)-Ascochlorin, 5-chloro-2, 4-dihydroxy-6-methyl-3-[(2$\text{E}$, 4$\text{E}$)-5-(1,2,6-trimethyl-3-oxocyclohexyl)3-methyl-3,4-pentadienyl] benzaldehyde, was synthesized in 14 steps from (±)-3,4-dimethyl-2-cyclohexenone.