Application of negative chemical ionization mass spectrometry to the structure elucidation of perfluorochemicals and related compounds

The negative chemical ionization mass spectra of representative perfluorinated alkanes, cycloalkanes, ethers and tertiary amines have been examined, using Ar at about 0.5 torr as the reagent gas. The compounds chosen are typical of those under study as components of fluorochemical emulsion blood substitutes. Many such PFC's, particularly those with cyclic or branched structures, give intense molecular ions; most give simple spectra with a few major fragment ions at high mass, in marked contrast to the EI spectra which are dominated by m/e 69 (CF₃+) and 131 (C₃F₅+) of no value for structure elucidation. NCI-GC/MS is more sensitive than conventional EI-GC/MS and promises to be more generally useful for structure determination. Specific examples from the various classes will be presented, and their NCI and EI mass spectra compared.     

Alternative copolymerization of aziridines and carbon monoxide by γ-ray irradiation

The copolymerization of carbon monoxide and aziridines such as ethylenimine and propylenimine was carried out by γ-ray irradiation. Aziridines and carbon monoxide were allowed to copolymerize under γ-ray irradiation from a Co⁶⁰ source and gave a crystalline solid copolymer. The yield of the copolymer increased with reaction temperature. The composition of copolymers obtained did not depend on the feed ratio of monomers and was found to be almost equimolar. The copolymer of ethylenimine and carbon monoxide melted at about 322–335°C. with decomposition and has an infrared spectrum identical with that of poly-β-alanine obtained by the hydrogen-migration polymerization of acrylamide. The hydrolyzed product of the ethylenimine–carbon monoxide copolymer was confirmed to be β-alanine by paper chromatography. These results lead to the conclusion that the copolymerization of aziridines and carbon monoxide took place alternatively by γ-ray irradiation, and produced crystalline poly-β-alanines.     

Crystallization in poly(n-octadecyl methacrylate) monolayers

The crystallization kinetics of poly(n-octadecyl methacrylate) has been studied at the air–water interface. The rate of the crystallization has been measured by the decrease in the area of monolayers with time at various temperatures and surface pressures. The crystallization isotherms have been analyzed by the general mathematical treatment of the kinetics of phase changes, and the results show linear growth to be dominant. The variation of the rate constant with temperature and pressure has been illustrated by the difference in the supersaturation defined by introducing the equilibrium pressure-area isotherms.     

Novel acyl alpha-pyronoids, dictyopyrone A, B, and C, from Dictyostelium cellular slime molds

For the elucidation of the diversity of secondary metabolites of Dictyostelium cellular slime molds, we investigate the constituent of three species of slime molds. From the methanol extract of their fruit bodies, we obtained three novel compounds, dictyopyrone A (1) and B (2) from D. discoideum and D. rhizoposium and dictyopyrone C (3) from D. longosporum. They possess a unique alpha-pyrone moiety with a side chain at the C-3 position. Their relative structures were elucidated by spectral means, and the absolute configuration was confirmed by asymmetric synthesis of 1. Since these compounds were obtained from different species of Dictyostelium slime molds, they may be a type of compound common to this genus.     

Thermally-induced radical rearrangement of 2-(2-thienylmethoxy)-and 2-(2-benzo[b]thienylmethoxy)tropones

Upon heating at ca. 160°, 2-(2-thienylmethoxy)tropone afforded 3- and 5(2-thienylmethyl)tropolones. Formation of 3,5-bis(2-thienylmethyl)tropolone and unsubstituted tropolone indicated a radical chain mechanism for the thermolysis.     

Effect of pressure on the adsorption and micelle formation of aqueous dodecyltrimethylammonium chloride solution-hexane system

The interfacial tension of aqueous dodecyltrimethylammonium chloride (DTAC) solution/hexane interface has been measured as a function of pressure at concentrations around the critical micelle concentration (CMC). The derivative of the interfacial tension with respect to pressure has been observed to change abruptly at the CMC as in the case of aqueous dodecylammonium chloride (DAC) solution-hexane system studied already. The volume changes associated with the adsorption of DTAC from its monomeric and micellar states have been calculated. The results have indicated that the micelle formation of surfactant is treated like the appearance of a new macroscopic phase in the system. It has also been concluded that the micelle solubilizing hexane bears resemblance to the adsorbed film in terms of the volume. The difference in the pressure dependence of the volume of micelle formation ^MW between DTAC and DAC has been attributed to a larger polar group of DTAC. The fact that the value of ^MW is larger than that estimated from the conductivity data has been explained by the solubilization of hexane into the micelle.     

Effect of coexistent hydrocarbon phase on the volume behavior of adsorbed film and micelle of dodecyltrimethylammonium chloride

Interfacial tension () between aqueous dodecyltrimethylammonium chloride (DTAC) solution and benzene was measured as a function of pressure (p) and concentration. The/p was observed to change discontinuously at the critical micelle concentration; this indicates that the micelle formation of DTAC in the aqueous solution coexisting with benzene can be treated like the appearance of a macroscopic phase. It was shown by drawing the vs.A curves that hydrocarbon, such as benzene, cyclohexane, and hexane, make the adsorbed film of DTAC expand. The volume behavior of the micelle with benzene molecules solubilized was found to bear a strong resemblance to that of the adsorbed film at the water/benzene interface. The difference in the molar volume value of adsorbed DTAC among the coexistent hydrocarbon phases was attributed to the difference in the contribution of the hydrocarbon molecules to the interfacial excess volume; the number of the solubilized hydrocarbon molecules was evaluated to be one or two a micelle.     

Anodic behavior of nickel-based alloys in the electrolytic production of NF3

The Ni-based alloys, such as Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si, prepared by hot isostatic pressing (HIP) at 1000 °C under 2 × 10⁸ Pa for 2 h were employed as the anodes for electrolytic production of NF₃. The current efficiencies for NF₃ formation were 42-38, 52-40, 52-47, 63-62, 50 and 41% for Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloys, respectively. The current efficiencies only on Ni-Cu alloys with Cu concentrations lower than 10 mol% were almost the same as those on Ni sheet and HIPed Ni anodes, whereas those on the other alloys used in this study were smaller compared with those on both Ni anodes. On the other hand, the current losses caused by anodic dissolution of Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloy electrodes were 7.95-4.42, 6.40-7.02, 5.60-6.30, 3.34-6.33, 5.10 and 0.18%, respectively. The anode consumptions of Ni-5 mol% Cu and Ni-5 mol% Si alloys were almost the same or smaller compared with those of Ni sheet and HIPed Ni electrodes, though those of other alloys used were large compared with those of both Ni anodes. Consequently, addition of Cu to the nickel matrix is available for a cheaper cost of anode with keeping a same current efficiency as that on the Ni anode and addition of Si to the nickel matrix is effective for decreasing anode consumption largely. A Ni sheet electrode containing a trace of impurities, such as Co, Mn, Ag and Al, is also favorable as the anode for electrolytic production of NF₃.     

Synthesis of 1-arylacenaphtho[1,2-d]pyrazoles and 5,7-Dehydro-5H,7H-benzo[b]acenaphtho[1,2-e]-1,3a,6a-triazapentalenes

2-Benzoyl- 5 and 2-acetylacenaphthenone 6 , prepared from the corresponding 1-acyl-2-(1-pyrrolidinyl)-acenaphthylenes 2 and 3 , reacted with arylhydrazines 8 under acidic conditions to give the corresponding 1-arylacenaphtho[1,2-d]pyrazoles 9 and 10 . Novel heteropentalene mesomeric betaines, 5,7-dehydro-5H,7H-benzo[b]acenaphtho[1,2-e]-1,3a,6a-triazapentalenes 13 and 14 were prepared by reductive cyclization of 1-(o-nitrophenyl)acenaphtho[1,2-d]pyrazoles 9d and 10d , respectively.     

Early History of Synchrotron Radiation Research in Japan

The Japanese electron synchrotron started operation on December 15, 1961, with energy of 750 MeV at the Institute for Nuclear Study (INS) of the University of Tokyo, Tanashi. It was established as a joint effort of the entire Japanese community of high-energy physicists so that its use was announced as being open to all Japanese users from the start.