Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

Substituent effects of iridium complexes for highly efficient red OLEDs

This study reports substituent effects of iridium complexes with 1-phenylisoquinoline ligands. The emission spectra and phosphorescence quantum yields of the complexes differ from that of tris(1-phenylisoquinolinato-C2,N)iridium(iii)(Irpiq) depending on the substituents. The maximum emission peak, quantum yield and lifetime of those complexes ranged from 598-635 nm, 0.17-0.32 and 1.07-2.34 micros, respectively. This indicates the nature of the substituents has a significant influence on the kinetics of the excited-state decay. The substituents attached to phenyl ring have an influence on a stability of the HOMO. Furthermore, those substituents have effect on the contribution to a mixing between 3pi-pi* and (3)MLCT for the lowest excited states. Some of the complexes display the larger quantum yield than Irpiq, which has the quantum yield of 0.22. The organic light emitting diode (OLED) device based on tris [1-(4-fluoro-5-methylphenyl)isoquinolinato-C2,N]iridium(iii)(Ir4F5Mpiq) yielded high external quantum efficiency of 15.5% and a power efficiency of 12.4 lm W(-1) at a luminance of 218 cd m(-2). An emission color of the device was close to an NTSC specification with CIE chromaticity characteristics of (0.66, 0.34).     

Compounds having thiourea moiety as derivatization reagents in liquid chromatography/electrospray ionization–tandem mass spectrometry (LC/ESI‐MS/MS): synthesis of derivatization reagents for carboxylic acids

The derivatization reagents for carboxylic acids, N‐(Pyridin‐3‐yl)hydrazinecarbothioamide, N‐[4‐(dimethylamino)phenyl]hydrazinecarbothioamide, 1‐(2‐aminoethyl)‐3‐(pyridin‐3‐yl)thiourea, 1‐(2‐aminoethyl)‐3‐[4‐(dimethylamino)phenyl]thiourea and 4‐(2‐aminoethyl)‐N‐phenylpiperazine‐1‐carbothioamide were synthesized. These reagents reacted with carboxylic acids at 60°C for 45 min in the presence of the condensation reagents. The generated derivatives were favorably separated on the reversed‐phase column and sensitively detected by electrospray ionization tandem mass spectrometry. These reagents enhanced the electrospray ionization response of the analyte and generated a particular product ion efficiently by collision‐induced dissociation, and thus they were suitable for MS/MS detection. Copyright © 2010 John Wiley & Sons, Ltd.     

The separation of date (Phoenix dactylifera) sterols by liquid chromatography

Summary Isolation of a crystalline plant sterol mixture from the sarcocarp of the date was followed by successive extraction and column chromatography. The composition of the mixture was examined by gas chromatography. An additional gas chromatographic-mass spectroscopic identification of the sterol mixture was carried out after conversion of the sample into its trimethylsilyl derivates. Cholesterol, campesterol, stigmasterol,-sitosterol and isofucosterol were found from the identification of molecular ions, the assignment of fragment ions and the comparison of each spectral feature with that of the authentic compound. The sterol mixture was then examined by high-performance liquid chromatography employing a Zorbax ODS column and an acetonitrile-water-0.1M sodium acetate (90101) solvent system, and the peaks were detected with radiation at 210 nm. Six peaks were found on the chromatogram. The identification of each peak by means of gas chromatography and infrared spectroscopy was followed by the collection of each component. The peaks were an unknown (ghost) peak, isofucosterol, cholesterol, stigmasterol + campesterol, campesterol and-sitosterol, successively. The plant sterol mixture has only been analysed on reverse-phase column packings whereas the hormonal corticosteroids and male or female hormonal steroids have been separated on both normal and reverse-phase column packings.

---

Zusammenfassung Nach Isolierung aus dem Fruchtfleisch der Dattel wurde ein Gemisch kristallisierter pflanzlicher Sterine der stufenweisen Extraktion und Säulenchromatographie unterworfen. Dessen Zusammensetzung wurde gaschromatographisch untersucht. Außerdem wurde dieses Steringemisch gaschromatographisch-massenspektrographisch nach Überführung in die entsprechenden Trimethylsilylderivate identifiziert. Cholesterin, Campesterin, Stigmasterin,-Sitosterin und Isofucosterin wurden durch Nachweis der Molekularionen, durch Zuordnung der Fragmentionen und durch Vergleich mit dem spektralen Verhalten der betreffenden authentischen Verbindung festgestellt. Das Steringemisch wurde dann im Wege der Hochleistungs-Flüssigchromatographie untersucht. Hierzu diente eine Zorbax ods-Säule und ein Lösungsmittelgemisch aus Acetonitril—Wasser—0,1M Natriumacetat (90 10 1). Die Peaks wurden durch Lichtstrahlen von 210 nm nachgewiesen. Sechs Peaks wurden gefunden. Nach Identifizierung durch Gaschromatographie und IR-Spektroskopie wurde jede einzelne Verbindung gesammelt. Neben einer unbekannten Zacke entsprachen die Peaks der Reihe nach dem Isofucosterin, dem Cholesterin, Stigmasterin+Campesterin, Campesterin und-Sitosterin. Das Gemisch der pflanzlichen Sterine wurde nur mit phasenverkehrten Säulen analysiert, während Corticosteroidhormone sowie männliche und weibliche Steroidhormone sowohl auf normalen wie auf phasenverkehrten Säulenpackungen getrennt wurden.

     

Adsorption and structural change of beta-lactoglobulin at the diacylglycerol-water interface

Diacylglycerol (DAG)/water and triacylglycerol (TAG)/water emulsions were prepared using beta-lactoglobulin (beta-LG) as an emulsifier. The oil phase (20% in emulsion) was mixed with beta-LG solution (1% beta-LG in water, pH 7) to prepare the emulsions. A fine oil-in-water emulsion was produced from both DAG and TAG oils. The interfacial protein concentration of the TAG emulsion was higher than that of the DAG emulsion. The zeta potential of the DAG oil droplet was higher than that of the TAG oil droplet. The front-surface fluorescence spectroscopy results revealed that tryptophan residues in beta-LG moved to the more hydrophobic environment during the adsorption of protein on the oil droplet surfaces. Changes in secondary structure of beta-LG during the adsorption were determined by FT-IR spectroscopy. Decreases in the beta-sheet content concomitant with increases in the alpha-helix content were observed during the adsorption to the oil droplets, and the degree of structural change was greater for beta-LG in the TAG emulsion than in the DAG emulsion, indicating the increased unfolding of adsorbed beta-LG on the TAG oil droplet surface. Results of interfacial tension measurement supported this speculation, that is, the increased unfolding of the protein at the TAG-water interface. Trypsin- and proteinase K-catalyzed proteolysis was used to probe the topography of the adsorbed beta-LG on the oil droplet surface. SDS-PAGE analyses of liberated peptides after the proteolysis indicated the higher susceptibility of beta-LG adsorbed on the DAG oil droplet surface than on the TAG oil droplet surface. On the basis of all the results, we discussed the conformation of the adsorbed beta-LG on the two oil droplet surfaces.     

Effect of laser annealing using high repetition rate pulsed laser on optical properties of phosphorus-ion-implanted ZnO nanorods

The effect of high repetition rate pulsed laser annealing with a KrF excimer laser on the optical properties of phosphorus-ion-implanted zinc oxide nanorods has been investigated. The recovery levels of phosphorus-ion-implanted zinc oxide nanorods have been measured by photoluminescence spectra and cathode luminescence images. Cathode luminescence disappeared over 300 nm below the surface due to the damage caused by ion implantation with an acceleration voltage of 25 kV. When the annealing was performed at a low repetition rate of the KrF excimer laser, cathode luminescence was recovered only in a shallow area below the surface. The depth of the annealed area was increased along with the repetition rate of the annealing laser. By optimizing the annealing conditions such as the repetition rate, the irradiation fluence and so on, we have succeeded in annealing the whole damaged area of over 300 nm in depth and in observing cathode luminescence. Thus, the effectiveness of high repetition rate pulsed laser annealing on phosphorus-ion-implanted zinc oxide nanorods was demonstrated.     

State-of-the-art in organic elemental micro and ultramicro analysis

Summary Nernst developed a quartz torsion microbalance in 1903. In consequence of this pioneering work, Emich in the Technical University of Graz, Austria, had systematized a series of chemical operations in microscale as well as a microchemical analysis. Further advances in technique and method of organic microanalysis had been accomplished by Pregl in Graz in 1912. His work had been strongly supported by a new microbalance which was known as Kuhlmann microbalance. Pregl's original methods of analysis were arranged and published in 1916 as Die quantitative organische Mikroanalyse. It is still noteable that the Nobel prize of 1933 had been presented to Dr. Pregl. In accordance with a combination of electronic microbalance and computer techniques, organic elemental microanalysis has grown to include advanced instrumentation and on-line computation. Successful adaptation of microchemical analysis has expanded today not only to pure organic compounds, but on industrial intermediates, polymers, food additives and many other compositions. The paper includes a discussion of the relative merits of traditional and modern analytical techniques together with the progression of microbalances. Recent developments in organic micro and ultramicro analysis in Japan are also described.     

Synthesis of Glycocinnasperimicin D

The first total synthesis of amino sugar antibiotic glycocinnasperimicin D ( 1 ) has been achieved by a convergent, three‐component coupling strategy. The key steps involve the Heck–Mizoroki reaction by using the iodophenyl glycoside 50 and acryl amide 32 to furnish the right core structure of 1 , and the construction of the urea glycoside employing the reaction of glycosyl isocyanate 8 with amino sugar 9 . Glycosyl isocyanate 8 was prepared by the oxidation of isonitrile 10 , which displayed excellent reactivity in the coupling event. Synthetic roadblocks, encountered during this synthetic effort, have led to the development of the α‐selective, Lewis acid catalyzed phenyl glycosylation process with 2‐amino‐hexopyranose and a procedure for acetonide deprotection without affecting the silyl ethers.