Adsorption of lignosulphonates on polystyrene latex particles from aqueous solution and flocculation of the dispersions by electrolytes

Summary The adsorption isotherms of lignosulphonates with various degrees of sulphonation (0.5, 1,0, 2.0 and 4.0 moles per 840 unit weight of lignin) were measured on polystyrene latex particles from aqueous solution at 25 °C. The results showed that the lignin with the lowest degree of sulphonation gave the highest adsorption. The lignin with 1.0 and 2.0 degrees of sulphonation gave similar adsorption which was lower than that obtained with the half sulphonated lignin. However, further increase in degree of sulphonation resulted in an increase in the adsorption.Adsorption layer thickness measurements showed that the lignosulphonate with half degree of sulphonation gave thicker layers than that with 2.0 moles sulphonation. Increasing electrolyte (NaCl and CaCl,) concentration resulted in a decrease in the adsorbed layer thickness. Microelectrophoresis at 25 °C, showed only small differences in the zeta potential as a function of degree of sulphonation. Addition of electrolytes (KCl, Na₂SO₄ and CaCl₂) showed a reduction in the zeta potential. Flocculation by salts of various valence types, namely KCl, Na₂SO₄ and CaCl₂ showed that the critical flocculation concentration (C.F.C.) decreases in the order KCl > Na₂SO₄ > CaCl₂. The change in degree of sulphonation had only a marginal effect on the C.F.C.

---

Zusammenfassung Die Isothermen der Adsorption von Lignosulfonaten mit verschiedenen Sulfonierungsgraden (S = 0,5, 1,0, 2,0 und 4,0 Mole pro 840 Gewichtseinheit des Lignins) an PolystyrolLatex-Teilchen in wäßriger Lösung wurden bei 25 °C gemessen. Hiernach wird Lignin mit den niedrigsten S-Werten am stärksten adsorbiert. Lignine mitS = 1,0 und 2,0 zeigen ähnliche Adsorption; sie ist aber kleiner als die fürS = 0,5. Mit weiter steigendemS nimmt die Adsorption zu.Aus der Messung der Dicke der Adsorptionsschicht folgt, daß fürS = 0,5 größer als fürS = 2,0 ist. Bei wachsendem Zusatz von NaCl oder CaCl₂ fällt ab. Nach Mikroelektrophorese-Messungen bei 25 °C hängt das -Potential nur wenig vonS ab. fällt durch die Gegenwart von KCl, Na₂SO₄ oder CaCl₂ ab. Mit den gleichen Salzen erfolgt eine Ausflockung, wobei die kritische Flockungskonzentration CFC in der Reihenfolge KCl, Na₂SO₄, CaCl₂ abnimmt; CFC ändert sich nur wenig mitS.

     

Pinacol-Pinacolone Rearrangement of 1, 2-Di-(p-methoxyphenyl)-ethane-1, 2-diol and Bis-(4-methoxyphenyl)-acetaldehyde in Acid Media

1, 2-Di-(p-methoxyphenyl)-ethane-1, 2-diol gave in acid media bis-(4-methoxy-phenyl)-acetaldehyde, 4-4′-dimethoxy-deoxybenzoin, and 1, 2-di-(p-methoxyphenyl)-ethylene oxide; their respective yields being influenced by at least 3 factors: (i) the acid, (ii) its concentration, and (iii) the reaction period. Bis-(4-methoxyphenyl)-acetaldehyde rearranged to the deoxybenzoin in boiling sulfuric (50%) or phosphoric (75%) acids (w/w), and to two isomeric 1, 2-diacetoxy-1, 2-di-(p-methoxyphenyl) ethanes when it was heated with acetic anhydride. The mechanisms of these reactions are discussed.     

Atomic absorption spectrometric and potentiometric microdetermination of the nitro and nitroso groups in organic compounds

New simple, rapid, accurate, and selective methods are described for microdetermination of the nitro and nitroso groups in organic compounds. These are based on reduction with cadmium metal and 0.05 M HCl whereby 6 and 4 equivalents of the cadmium ions are released per nitro and nitroso groups, respectively. The cadmium ions are measured by atomic absorption spectrometry at 228.8 nm, potentiometrically by titration with EDTA using the cadmium ion selective electrode, and visually by EDTA titration using Eriochrome Black T indicator. Results with an average recovery of 98% and a mean standard deviation of 1.3% are obtainable and no interferences are caused by many nitrogen, oxygen, and sulfur functional groups.     

Investigation of the interactions in emulsions stabilized by a polymeric surfactant and its mixtures with an anionic surfactant

 The interaction of a nonionic polymeric surfactant with an anionic surfactant at the oil–water interface has been studied by its effects on the droplet size, stability and rheology of emulsions. Oil-in-water (o/w) emulsions were prepared using isoparaffinic oil and mixtures of a nonionic polymeric surfactant with an anionic surfactant. The macro-molecular surfactant was a graft copolymer with a backbone of polymethyl methacrylate and grafted polyethylene oxide (a graft copolymer with PEO chains of MW=750). The anionic surfactant was sodium dodecyl sulfate (SDS). The stabiliza-tion of the emulsion droplets was found to be different when using one or the other surfactant. The mechanism of stabilization of emulsion droplets by the macro-molecular surfactant is of the steric type while the stabilization by anionic surfactant is of the electrostatic repulsion type. Emulsions stabilized with mixtures present both types of stabilization. Other effects on the preparation and stabilization of emulsions were found to be dependent on properties associated with the surfactant molecular weight such as the Marangoni effect and Gibbs elasticity. The initial droplet size of the emulsions showed a synergistic effect of the surfactant combination, showing a minimum for the mixtures compared to the pure components. Emulsion stability also shows a synergistic interaction of both surfactants. Rheological measurements allow for the estimation of the interparticle interaction when measured as a function of volume fraction. Most of the effects observed can be attributed to the differences in interfacial tension and droplet radius produced by both surfactants and their mixtures. The elastic moduli are well explained on the basis of droplet deformation. Ionic versus steric stabilization produce little difference in the observed rheology, the only important differences observed concerned the extent of the linear viscoelasticity region. Received: 22 November 1996 Accepted: 24 March 1997     

A simple technetium generator

A systematic study on the extraction of⁹⁹Mo and its daughter^99mTc by pure organic diluents and dinonylnaphthalinesulfonic acid (DNNS) is described. The aqueous phases used are H₂SO₄, HCl, KI and their binary mixture solutions. The effect of alcohols on the distribution coefficient has been investigated. As a result of the study, a simple and rapid generator is built for the production of pure^99mTc from⁹⁹Mo.     

Emulsion polymerization of styrene and methyl methacrylate using a hydrophobically modified inulin and comparison with other surfactants

The use of a new class of graft polymer surfactants, based on inulin, in emulsion polymerization of poly(methyl methacrylate) (PMMA) and polystyrene (PS) particles is described. PS and PMMA were synthesized by emulsion polymerization, and stable particles with a high monomer content (50 wt %) were obtained with a very small amount of polymeric surfactant ([surfactant]/[monomer] = 0.0033). The latex dispersions were characterized by dynamic light scattering and by transmission electron microscopy to obtain the average particle size and the polydispersity index, and the stability was determined by turbidimetry measurements and expressed in terms of critical coagulation concentration. The last section gives a comparison of PMMA particles prepared by emulsion polymerization using classical surfactants from different types as emulsifiers with that obtained using the copolymer surfactant. It shows the superiority of INUTEC SP1 as it is the only one that allows stable particles at 20 wt % monomer content, with a smaller ratio [surfactant]/[monomer] = 0.002.     

A simple colorimetric method for the assay of penicillin G salt and penicillamine by oxidation with iodate

A simple colorimetric procedure is described for determination of penicillin G salt and penicillamine. It is based on oxidation with potassium iodate at room temperature and measurement of the liberated iodine at 520 nm after extraction with carbon tetrachloride. Compared with other procedures, this method proved to be more rapid, highly reproducible and reasonably accurate. The relative standard deviation did not exceed 0.9% and 0.4% for penicillin and penicillamine, respectively. The procedure has been successfully applied to pharmaceutical preparations containing either of the two compounds.     

Dosimetric investigations on radiation-induced Ag nanoparticles in a gel dosimeter

Journal of Radioanalytical and Nuclear Chemistry - Radiation-induced Ag° nanoparticles (NPs) in silver nitrate gel dosimeter incorporating various components was investigated in the dose range...