A modified method for the sequential determination of 210Po and 210Pb in Ca-rich material using liquid scintillation counting

This research describes methods for the sequential determination of ²¹⁰Pb and ²¹⁰Po activity concentrations in Ca-rich ash samples collected from oil shale-fired power plants in Estonia. The procedure involves digestion of Ca-rich ash samples in a microwave digestion system, radiochemical separation of ²¹⁰Pb and ²¹⁰Po and their measurements. All samples, blanks and standards were measured by liquid scintillation counting (Quantulus 1220). The method was tested using IAEA (International Atomic Energy Agency) RGU-1 and IAEA-444 reference materials. Spectral calibration/peak identification which included the optimization of α/β discrimination system (pulse shape analyser), and recovery have been made by ²⁰⁹Po and ²¹⁰Pb standard solutions.

     

Structural study of TiO2 thin films by micro-Raman spectroscopy

The Raman spectroscopy method was used for structural characterization of TiO₂ thin films prepared by atomic layer deposition (ALD) and pulsed laser deposition (PLD) on fused silica and single-crystal silicon and sapphire substrates. Using ALD, anatase thin films were grown on silica and silicon substrates at temperatures 125–425 °C. At higher deposition temperatures, mixed anatase and rutile phases grew on these substrates. Post-growth annealing resulted in anatase-to-rutile phase transitions at 750 °C in the case of pure anatase films. The films that contained chlorine residues and were amorphous in their as-grown stage transformed into anatase phase at 400 °C and retained this phase even after annealing at 900 °C. On single crystal sapphire substrates, phase-pure rutile films were obtained by ALD at 425 °C and higher temperatures without additional annealing. Thin films that predominantly contained brookite phase were grown by PLD on silica substrates using rutile as a starting material.     

Adsorption and Kinetics Studies of Cr (VI) by Graphene Oxide and Reduced Graphene Oxide-Zinc Oxide Nanocomposite

In this work, graphene oxide (GO) and its reduced graphene oxide-zinc oxide nanocomposite (rGO-ZnO) was used for the removal of Cr (VI) from aqueous medium. By employing a variety of characterization techniques, morphological and structural properties of the adsorbents were determined. The adsorption study was done by varying concentration, temperature, pH, time, and amount of adsorbent. The results obtained confirmed that rGO-ZnO is a more economical and promising adsorbent for removing Cr (VI) as compared to GO. Kinetic study was also performed, which suggested that sorption of Cr (VI) follows the pseudo-first-order model. For equilibrium study, non-linear Langmuir was found a better fitted model than its linearized form. The maximum adsorption capacity calculated for GO and rGO-ZnO nanocomposite were 19.49 mg/g and 25.45 mg/g, respectively. Endothermic and spontaneous nature of adsorption was detected with positive values of ΔS (change in entropy), which reflects the structural changes happening at the liquid/solid interface.     

Crystal Structure-Guided Design of Bisubstrate Inhibitors and Photoluminescent Probes for Protein Kinases of the PIM Family

We performed an X-ray crystallographic study of complexes of protein kinase PIM-1 with three inhibitors comprising an adenosine mimetic moiety, a linker, and a peptide-mimetic (d-Arg)₆ fragment. Guided by the structural models, simplified chemical structures with a reduced number of polar groups and chiral centers were designed. The developed inhibitors retained low-nanomolar potency and possessed remarkable selectivity toward the PIM kinases. The new inhibitors were derivatized with biotin or fluorescent dye Cy5 and then applied for the detection of PIM kinases in biochemical solutions and in complex biological samples. The sandwich assay utilizing a PIM-2-selective detection antibody featured a low limit of quantification (44 pg of active recombinant PIM-2). Fluorescent probes were efficiently taken up by U2OS cells and showed a high extent of co-localization with PIM-1 fused with a fluorescent protein. Overall, the developed inhibitors and derivatives represent versatile chemical tools for studying PIM function in cellular systems in normal and disease physiology.     

Subwavelength Hyperlens Resolution With Perfect Contrast Function

Recently it has been shown that plasmonic effects in hyperbolic metamaterials may facilitate overcoming the diffraction limit and enhance the contrast function of an image by filtering background radiation. Unfortunately, the contrast function of such a dark‐field hyperlens degrades in the deep‐subwavelength regime. We push forward the concept of the contrast function revival in the subwavelength imaging by introduction of the proper phase difference between coherent sources. To study this effect we develop a simplified theory of the wave propagation through a hyperbolic metamaterial and show that, in principle, two sources standing apart at any subwavelength distance can be distinguished. We suggest two feasible designs, the first of which employs the obliquely incident light, while the second one is based on a properly designed metasurface. The concept can be used in high‐contrast subwavelength microscopy.     

CuInS2 solar cell absorber plasmonically modified by gold nanoparticles

Thin CuInS₂ light-absorbing layer prospective for the solar cell applications is modified by gold nanoparticles. Theoretical and experimental possibilities of placement nanoparticles over or under the CuInS₂ coating were tested. It was revealed that placement of nanoparticles under the CuInS₂ layer is better in terms of spray pyrolysis technique. It results in more effective plasmon-enhanced light absorption in the CuInS₂ layer at the visible/near infrared 650–700 nm spectral range.