Synthesis and Mesogenic Properties of Liquid Crystals Containing Terminal Cyclohexylmethanol,Cyclopentylmethanol, Cyclobutylmethanol and Cyclopropylmethanol Moiety

Four series of compounds 11?50 containing terminal alicyclic rings such as cyclohexylmethyl, cyclopentylmethyl, cyclobutylmethyl, and cyclopropylmethyl rings were synthesized and their liquid crystal behavior studied. The ring size and the length of flexible alkoxy chain influence the phase formation in different ways. While the smaller ring and the shorter alkoxy chain tend to favor the formation of the N phase, the larger ring and the longer alkoxy chain tend to favor the formation of the SmC phase. All the compounds except 11 and 21 exhibit SmA phases. The widest temperature range of the N, SmA, and SmC phases are found in the compounds 41 , 46 , and 20 , respectively, which are 75 °C for 41 , 115 °C for 46 , and 100 °C for 20 .     

An efficient green synthesis and antibacterial activity of 1,3-benzoxazine and 1,3-naphthoxazine using NaCl.SiO2 as solid catalyst in neat condition

A series of 1,3-oxazine derivatives were synthesized by a one-pot three-component (ie, phenol, formaldehyde, amine) method where SiO₂ bonded with NaCl was used as a reusable, more efficient, easily prepared, and available solid catalyst. The reactions were also carried out at room temperature for greener approach. in vitro studies for the synthesized compounds were also done against two gram-positive (Bacillus subtilis and Staphylococcus aureus) and two gram-negative bacteria (Escherichia coli and Klebsiella pneumonia) to check for their applicability as an antibacterial agent where some of the synthesized compounds gives the best antibacterial activity against selected bacterial strains. Streptomycin was used as a standard control for all the microbial test.     

Effect of aniline formaldehyde resin on the conjugation length and structure of doped polyaniline: Spectral studies

A DBSA (n‐dodecylbenzene sulfate)‐complexed aniline formaldehyde [AF(DBSA)_1.0] was successfully synthesized with excess aniline (compared with formaldehyde) in the presence of n‐dodecylbenzene sulfonic acid (HDBSA), which was complexed with aniline monomer before polymerization. The resin was carefully characterized with ¹H and ¹³C NMR, electron spectroscopy for chemical analysis, and Fourier transform infrared and was demonstrated to be a polymer in which anilines were all complexed with HDBSA and became anilinium salts. A drastic decrease of the maximum absorption wavelength (ultraviolet–visible spectra) of DBSA‐doped polyaniline [PANI(DBSA)_0.5] was found when AF(DBSA)_1.0 was mixed, and this resulted from the reduced conjugation length. A similar effect on PANI(DBSA)_0.5 was found when free HDBSAs were mixed with PANI(DBSA)_0.5. Visual inspection with an optical microscope revealed that PANI(DBSA)_0.5/AF(DBSA)_1.0 gave uniform morphologies in various compositions, showing possible miscibility for this system. X‐ray diffraction patterns of PANI(DBSA)_0.5/AF(DBSA)_1.0 showed that the layered structure of PANI(DBSA)_0.5 was still present but became shorter in the polyblend because of the presence of AF(DBSA)_1.0. Solid‐state ¹³C NMR spectra revealed that the reduced conjugation length was derived from the interaction of alkyl groups between HDBSA, complexed DBSA, and dopant DBSAs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3116–3125, 2005     

Gamma-induced modifications of polycarbonate polymer

Gamma-induced modifications in polycarbonate polymer have been studied in the dose range of 10¹–10⁶ Gy. Thin films of polycarbonate have been irradiated with different gamma doses from a Co⁶⁰ source. To monitor the modifications caused by gamma radiation, FT-IR, differential scanning calorimetry and X-ray diffraction studies have been performed. The studies have indicated that at the dose of 10⁶ Gy, phenolic group forms through scissioning of ester linkage. Though the effect of radiation is most significant at the highest dose, the process of modifications starts at 10³ Gy. Scissioning of the polymeric chain initiates a different morphological zone within the polymer matrix, and the polymer becomes more crystalline with increasing dose. Owing to chain scissioning, the mobility of the polymer increases, which in turn reduces the glass transition temperature of the polymer.     

Gamma effect on track properties of PADC detector

Effect of high gamma irradiation on track properties of PADC (Homalite) has been studied in the dose range of 10¹–10⁶ Gy. The properties like bulk-etch rates and track-etch rates of the detector are found to increase due to gamma exposure. Etching efficiency of the detector increases due to exposure and it is significant at the dose higher than 10³ Gy. Another track property, the critical angle, is also influenced by gamma exposure and is found to decrease with increasing dose. In all cases it is observed that the post-gamma exposure has greater effect than the pre-gamma exposure. The experimental results are presented and discussed in details.     

Spectroscopic and thermal studies of gamma irradiated polypropylene polymer

Thin films of polypropylene have been irradiated with different doses of gamma radiation from a ⁶⁰Co source. IR, UV-VIS spectra of this polymer before and after irradiation have been recorded and from the spectral data some modifications in the properties have been investigated. The spectra indicated that polypropylene film was oxidised at the dose of 10⁶ Gy. Due to the removal of additives, total destruction of the polymer takes place at this dose. Isotactic arrangement of the polymer is no longer present after irradiation. Growth of carbon cluster takes place above a gamma dose of 10² Gy. Thermal stability of the polymer changes due to irradiation and the polymer seems to decompose in four different steps at the highest dose of 10⁶ Gy.     

Preparation and Characterization of Epoxy/Inorganic Anti‐electrostatic Nanocomposites Using Submicrometer Al(OH)3 and Colloid Al2O3

New organic‐inorganic hybrid materials and their anti‐electrostatic hybrid membranes are prepared via sol‐gel process. The polycondensation of epoxy oligomers and AEAPS/Al₂O₃ complexes which are organically surface modified submicrometer aluminum trihydroxide inorganic fillers with an active aminoterminal silane coupling agent, N‐(2‐aminoethyl)‐3‐aminopropyltrimethoxysilane (AEAPS), are performed. AEAPS enhances the interfacial interactions between the inorganic fillers and epoxy polymers. Meanwhile, this coupling agent maintains well dispersion of fillers in these composites. To improve the mechanical strength and thermal stability, pyromellitic dianhydride (PMDA) is used as curing agent. These hybrid films prepared from this method have excellent physical properties, such as UV‐shielding, high transmission in visible resign (> 85%), high hardness (7～8H) , high adhesive force (7～8) and low relative surface resistance (9.71 × 10¹¹～1.26 × 10¹⁰ Ω/cm²) with anti‐electrostatic characters. For thermal resistance, the best Td value of epoxy/PMDA/AEAPS/Al₂O₃ is 378.6 °C which is 85.4 °C higher than that of neat epoxy resin. Physical properties of these materials are almost the same as those of the nanocomposites prepared from expensive colloid Al₂O₃. Evidences from TEM micrograph show that the inorganic additives are dispersed evenly in organic matrix with nanometer scale.     

Computational studies on G-quadruplex DNA-stabilizing property of novel Wittig-based Schiff-Base ligands and their copper(II) complexes

A series of mono imine (C=N) group that contained Wittig-based Schiff-Base ligands was optimized using the DFT-based computational method and Gaussian 09 program package. These optimized molecules were docked with Quadruplex DNA (PDB ID: 1KF1) and duplex DNA (PDB ID: 1BNA) using AutoDock Vina program along with the reference molecules. Schiff-Base ligands derived from fused aromatic rings contained amines and precursor aldehyde (PA-5 both Z and E isomers) showed lower binding energy for G-quadruplex DNA among all and N-5 category both Z and E isomer Schiff-Base ligands have shown high selectivity for G-quadruplex DNA over duplex DNA which is a very important phenomenon to develop the G-quadruplex DNA stabilizers. For a few Schiff-Base molecules like Ligand-6 (1-{[2-Hydroxy-5-(2-pyren-1-yl-vinyl)-benzylidene]-amino}-naphthalen-2-ol) of N-5 category both Z and E isomers with groove binding and end stacking modes, molecular dynamic calculations were carried out. The study revealed that Ligand-6 of N-5 category E isomer with groove binding mode has higher stabilizing effect on G-quadruplex DNA in spite of having the higher binding energy value. Among Schiff-Base copper(II) complexes, Complex-3 (E-(1-{[2-Hydroxy-5-(2-pyren-1-yl-vinyl)-benzylidene]-amino}-naphthalen-2-ol)Cu) is having high binding affinity for G-quadruplex DNA as compared to others.

     

Chiral Liquid Crystals Synthesized from 2(S)‐[2(R)‐Methylhexyloxy]Propanol and its (S,S)‐Diastereomer

Two new chiral alcohols, 2(S)‐[2(R)‐methylhexyloxy]propanol ( 5 ) and 2(S)‐[2(S)‐methylhexyloxy]propanol ( 6 ), were prepared from the corresponding propionic acid ethyl ester 1 and 2 in the presence of sodium borohydride. They were used as the chiral moiety for the synthesis of two diastereomeric liquid crystals 7 and 8 . Both of them exhibit the phase sequence I‐SmA‐SmC*‐SmX‐Cr. The mesogenic properties of the (S,S)‐diastereomer 8 are more unique in comparison with those of the (S,R)‐diastereomer 7. It possesses not only lower SmA and SmC* phase transition temperature, 103 °C vs. 112 °C for SmA phase and 31 °C vs. 65 °C for SmC* phase, but wider SmA and SmC* phase range, 40 °C vs. 31 °C for SmA phase and 72 °C vs. 47 °C for SmC* phase. The diastereomer 8 also has a larger Ps value than that of 7, 24 vs. 15 nC cm^?2 measured at Tc ‐ T = 10 °C. The difference in these mesogenic properties is discussed by comparing their conformation difference at the molecular part of benzoate.     

Gamma-photon induced modifications in Polyvinylchloride (PVC) film

Gamma photon induced modifications in Polyvinylchloride (PVC) polymer have been studied in the dose range of 10¹-10⁶Gy at room temperature. Polyvinylchloride films have been irradiated with different doses of gamma radiation from a ⁶⁰Co source. To monitor the chemical and structural changes caused by gamma radiation IR and UV-Vis spectroscopy of pristine and irradiated PVC have been performed and using the spectral data some changes in the properties have been investigated. The spectral studies have indicated that at a dose of 10⁶Gy scissioning of the C-a bonds takes place. This scissioning of the chain initiates decomposition at a lower temperature. Thermal stability of the polymer reduces due to irradiation but the decomposition patterns remain the same. The optical band-gap is found to decrease due to irradiation at doses bigher than 10³Gy.