Chemical synthesis of p-type nanocrystalline copper selenide thin films for heterojunction solar cells

Nanocrystalline thin films of copper selenide have been grown on glass and tin doped-indium oxide substrates using chemical method. At ambient temperature, golden films have been synthesized and annealed at 200 °C for 1 h and were examined for their structural, surface morphological and optical properties by means of X-ray diffraction (XRD), scanning electron microscopy and UV-vis spectrophotometry techniques, respectively. Cu_2−xSe phase was confirmed by XRD pattern and spherical grains of 30 ± 4 - 40 ± 4 nm in size aggregated over about 130 ± 10 nm islands were seen by SEM images. Effect of annealing on crystallinity improvement, band edge shift and photoelectrochemical performance (under 80 mW/cm² light intensity and in lithium iodide electrolyte) has been studied and reported. Observed p-type electrical conductivity in copper selenide thin films make it a suitable candidate for heterojunction solar cells.     

Green synthesis and characterization of silver nanoparticles by Allium cepa L. to produce silver nano‐coated fabric and their antimicrobial evaluation

This research work was proposed to study the antimicrobial activity of the silver nanocoated fabric with the purpose of producing good dressing and clothing material. We synthesized simple, ecofriendly, cost‐effective and sustainable silver nanoparticles by using the aqueous extract of Allium cepa L. Here, A. cepa L. acts as a good reducing and capping agent that produced stable silver nanoparticles having particle size of range 36 ± 1 to 98 ± 2 nm, Poly dispersiblity index 0.234 ± 0.61 to 1.023 ± 0.33 and Zeta potential ‐12 ± 1.5 mV to ‐26 ± 1.2 mV. The effect of temperature and extract volume used was considered for optimization of synthetic procedure. The nanocoated fabric was characterized for morphological study, size (using transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE‐SEM) and zeta‐potential (Zeta Potentiometer). The presence of functional groups were observed by using attenuated total reflection‐Fourier transform infrared (ATR‐FTIR) and Raman spectroscopy. The crystallinity and structural property of the synthesized silver nanoparticles were studied in terms of Powder X‐ray diffraction (PXRD). An IC₅₀ value and zone of inhibition was studied which demonstrate that the silver nanocoated fabric have an excellent antibacterial property against Gram‐negative (Escherichia coli) and Gram‐positive (Staphylococcus aureus) bacteria. Further nanocoated fabric material was washed (with function of time 0, 10, 25, and 50 laundry cycles) and still retained their anti‐bacterial activity towards both strain. Initially there was 52 μg/ml of silver nanoparticles on the cotton fabric but after 50 laundry cycle in 500 ml of distilled water the fabric showed 92% efficiency against gram positive and 90% efficacy toward gram negative bacteria. It was found that 4.16 μg/ml nano particles leached in case of S. Aureus and 5.2 μg/mL silver nanoparticles leached in case of E. coli. Nanocoated fabric material synthesized using green synthesis was found to be economical with good resistance to washing.     

Total synthesis of attenols A and B

A concise approach for the total synthesis of attenols A and B is described involving MacMillan’s α-aminooxylation, Evan’s asymmetric alkylation, Brown’s allylation, and spiro-ketalization as key steps. This approach has successfully demonstrated the α-aminooxylation protocol for the construction of the anti-1,3-diol unit.     

An efficient protocol for the synthesis of 2-amino-4,6-diphenylpyridine-3-carbonitrile using ionic liquid ethylammonium nitrate

Chalcones on condensation with malononitrile and ammonium acetate in the presence of ionic liquid ethylammonium nitrate affords the corresponding 2-amino-4, 6-diphenylpyridine-3-carbonitrile in excellent yield. The ionic liquid is recycled and reused several times.     

LET distributions from CR-39 plates on Space Shuttle missions STS-84 and STS-91 and a comparison of the results of the CR-39 plates with those of RRMD-II and RRMD-III telescopes

The LET distributions during the Space Shuttle missions STS-84 (altitude 270-412 km, average 375 km; inclination angle, 51.6 degrees) and STS-91 (altitude 328-397 km, average 373 km; inclination angle, 51.6 degrees) were measured using CR-39 plastic nuclear track detectors. A correction for the dip-angle dependence of the track-formation sensitivity of the CR-39 plates was applied to the data analysis. The absorbed doses and the dose equivalents around RRMD Detector Units, estimated from the LET distributions in the LET region of 4-200 keV/micrometers, fluctuated with standard deviations of +/- 21% to +/- 35% in both flight experiments. The LET distributions obtained from the CR-39 plates agreed well with that obtained from RRMD-II in STS-91. However, the particle fluxes obtained from RRMD-III in STS-84 and STS-91 were two or three times higher than those obtained from RRMD-II and the CR-39 plates. It was concluded that the LET distributions obtained from RRMD-II and the CR-39 plates in the present flight experiments did not include the contribution of target-fragmented secondary heavy particles produced by low-LET particles, such as relativistic or semi-relativistic protons and helium ions, whereas RRMD-III was able to detect these secondary particles because of its low triggering level.     

Measurements of LET-distribution, dose equivalent and quality factor with the RRMD-III on the Space Shuttle Missions STS-84, -89 and -91

Dosimetric measurements on the Space Shuttle Missions STS-84, -89 and -91 have been made by the real-time radiation monitoring device III (RRMD-III). Simultaneously, another dosimetry measurement was made by the Dosimetry Telescope (DOSTEL) on STS-84 and by the tissue-equivalent proportional counter (TEPC) on STS-91. First, the RRMD-III instrument is described in detail and its results summarized. Then, the results of DOSTEL and TEPC are compared with those of the RRMD-III. Also, the absorbed doses obtained by TLD (Mg2SiO4) and by RRMD-III on board STS-84 and -91 are compared.     

1-Decanethiol, a new reagent for the odorless deprotection of aryl methyl ethers

1-Decanethiol has been found to be an excellent reagent for the deprotection of aryl methyl ethers. This newly developed protocol afforded the corresponding phenols in good to excellent yields. A clear advantage of 1-decanethiol over the more commonly used thiols is the easy extraction of both the deprotecting reagent and the reaction byproduct into the aqueous phase, which allows an essentially odorless work-up.     

A novel, short and efficient synthesis of divinyl ethers

An efficient one-step synthesis of divinyl ethers from aldehydes and ketones using Wittig olefination is described.