Sol/gel-derived silica gel was prepared at room temperature from tetraethyl orthosilicate precursor. The extracts of Terminalia chebula (Haritoki) were entrapped into the porous silica gel. Fourier transform infrared analysis revealed the proper adsorption of herbal values in the nanopores of the silica gel. Porosity was estimated by transmission electron microscope studies. The release kinetics of the extract in both 0.1 N HCl, pH 1.2, and Phosphate-buffer saline (PBS), pH 7.2, were determined using UV–Vis spectroscopy. Different dissolution models were applied to release data in order to evaluate the release mechanisms and kinetics. Biphasic release patterns were found in every formulation for both the buffer systems. The kinetics followed a zero-order equation for first 4 h and a Higuchi expression in a subsequent timeline in the case of 0.1 N HCl. In the case of PBS, the formulations showed best linearity with a first-order equation followed by Higuchi’s model. The sustained release of the extract predominantly followed diffusion and super case II transport mechanism. The release value was always above the minimum inhibitory concentration. 相似文献
The cleavage of α-hydroxy tert-butyldimethylsilyl ether to diol takes place efficiently with LAH. It has been proposed that the reaction proceeds via intramolecular hydride transfer from the alkoxy aluminium hydride. In order to substantiate this, reduction of TBDMS ether with LAH in a variety of substrates was studied. 相似文献
Significant progress has been made in the last few years toward synthesizing highly dispersible inorganic catalysts for application in the electrodes of direct methanol fuel cells. In addition, research toward achieving an efficient catalyst supporting matrix has also attracted much attention in recent years. Carbon black- (Vulcan XC-72) supported Platinum and Platinum-Ruthenium catalysts have for long served as the conventional choice as the cathode and the anode catalyst materials, respectively. Oxygen reduction reaction at the cathode and methanol oxidation reaction at the anode occur simultaneously during the operation of a direct methanol fuel cell. However, inefficiencies in these reactions result in a generation of mixed potential. This, in turn, gives rise to reduced cell voltage, increased oxygen stoichiometric ratio, and generation of additional water that is responsible for water flooding in the cathode chamber. In addition, the lack of long-term stability of Pt-Ru anode catalyst, coupled with the tendency of Ru to cross through the polymer electrolyte membrane and eventually get deposited on the cathode, is also a serious drawback. Another source of potential concern is the fact that the natural resource of Pt and the rare earth metal Ru is very limited, and has been predicted to become exhausted very soon. To overcome these problems, new catalyst systems with high methanol tolerance and higher catalytic activity than Pt need to be developed. In addition, the catalyst-supporting matrix is also witnessing a change from traditionally used carbon powder to transition metal carbides and other high-performance materials. This article surveys the recent literature based on the advancements made in the field of highly dispersible inorganic catalysts for application in direct methanol fuel cells, as well as the progress made in the area of catalyst-supporting matrices. 相似文献
On the basis of mass spectral studies alone, the relatively new manganese complex, Mn(Et2EBC)Cl2 (Et2EBC = 4,11-diethyl-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane), a homolog of the well proven, peroxide-based laundry bleach, Mn(Me2EBC)Cl2, has been reported to undergo a sequence of 2-electron oxidation steps, ultimately converting its ethyl groups into chelated ethoxo and methylene carboxylato groups, [MnIV{(?OCH2CH2)(?O2CCH2)}EBC)](PF6)2. We report here the isolation and characterization of that unusual product, and provide insight into the remarkable catalytic pathway to its formation. At temperatures above 0 °C, oxidation by aqueous H2O2 reliably transforms Mn(Et2EBC)Cl2 into [MnIV{(?OCH2CH2)(?O2CCH2)}EBC)]2+. The experimental data for this intramolecular ethyl group transformation is consistent with oxygen insertion into a methyl C?CH moiety of the ethyl group, ?CNCH2C(?CH)H2, by the MnIV?COOH functional group. 相似文献
The sol-emulsion-gel method is used for the preparation of about 5-7 nm size Eu2O3 doped and coated Y2SiO5 nanoparticles at 1300 degrees C. Here, we report the role of surface coating, dopant concentration and temperature of heating on the modification of crystal structure and the photoluminescence properties of Y2SiO5:Eu3+ nanocrystals. It is found that photoluminescence properties are sensitive to the crystal structure which is again controlled by surface coating, concentration and heating temperature. The decay times are 0.76, 1.14, 1.23 and 1.40 ms for 0.25, 0.5, 1.0 and 2.5 mol% Eu2O3 doped Y2SiO5 nanocrystals prepared at 1100 degrees C (X1-Y2SiO5). However, in X2-Y2SiO5 crystal phase (at 1300 degrees C) the average decay times are 1.05, 1.35, 1.55 and 1.60 ms for 0.25, 0.5, 1.0 and 2.5 mol% Eu2O3 doped Y2SiO5 nanocrystals, indicating the photoluminescence properties depend on both the crystal structure and the concentration of ions. The emission intensity of the peak at 612 nm (5D0-->7F2) of the Eu3+-ions is found to be sensitive to the doping and surface coating of Y2SiO5 nanocrystals. The decay times are 1.55 and 1.70 ms for 1300 degrees C heated 1.0 mol% Eu2O3 doped and coated Y2SiO5 nanocrystals, respectively. Our analysis suggests that the site symmetry of ions plays a most important role in the modification of radiative relaxation mechanisms and as a result on the overall photoluminescence properties. 相似文献
Classical results due to Ingham and Paley–Wiener characterize the existence of nonzero functions supported on certain subsets of the real line in terms of the pointwise decay of the Fourier transforms. Viewing these results as uncertainty principles for Fourier transforms, we prove certain analogues of these results on connected, noncompact, semisimple Lie groups with finite center. We also use these results to show a unique continuation property of solutions to the initial value problem for time-dependent Schrödinger equations on Riemmanian symmetric spaces of noncompact type. 相似文献
Because the local microstructure plays a pivotal role for many biological functions, a wide range of methods have been developed to design precisely engineered substrates for both fundamental biological studies and biotechnological applications. However, these techniques have been by‐and‐large limited to flat surfaces. Herein, we use electrohydrodynamic co‐spinning to prepare biodegradable three‐dimensional fiber scaffolds with precisely engineered, micrometre‐scale patterns, wherein each fiber is comprised of two distinguishable compartments. When bicompartmental fiber scaffolds are modified via spatially controlled peptide immobilization, highly selective cell guidance at spatial resolutions (<10 µm), so far exclusively reserved for flat substrates, is achieved. Microstructured fiber scaffolds may have utility for a range of biotechnological applications including tissue engineering or cell‐based assays.
The research described was concerned with the effect of layered-silicate-based organically modified nanoclay fillers on controlling the extent of necking in a polymer melt extrusion film casting (EFC) process. We show that a linear polythylene resin (such as a linear low-density polyethylene—LLDPE) filled with a very low percentage of well-dispersed (or intercalated) nanoclay displays an enhanced resistance to the necking phenomenon. In general, melt-compounded nanoclay-filled LLDPE resin formulations displayed a higher final film width (less necking), thus a lower final film thickness (greater draw down for the same draw ratio), and cooled down faster when compared to the base LLDPE resin. Incorporation of nanoclay filler in the mainly linear chain LLDPE resin led to significant modification of the melt rheological properties that, in turn, affected the melt processability of these formulations. Primarily, the intercalated nanoclay-filled LLDPE formulations displayed the presence of strain-hardening in unaxial extensional rheology. Additionally, the presence of well-dispersed nanoclay in the LLDPE resin led to a display of prominent extrudate swell indicating the presence of melt elasticity in such formulations. The presence of melt elasticity, as shown by shear rheology and strain-hardening, observed by uniaxial extensional rheology, contributed to the LLDPE nanoclay formulations displaying an enhanced resistance to necking for these films. It can be concluded that linear chain polymers susceptible to necking in an EFC process can be made more resistant to such necking by using nanoclay fillers at very low levels of loading. 相似文献
An expedient route toward the synthesis of 4-hydroxyquinolone grafted spiropyrrolidines or pyrrolizidines has been accomplished through 1,3-dipolar cycloaddition reaction of various azomethine ylides derived from isatin or acenaphthalene and sarcosine with 4-hydroxyquinolone derivatives as dipolarophile. The regio and stereo chemical outcome of the cycloaddition reaction is ascertained by X-ray crystallographic studies and spectroscopic techniques of the cycloadducts. Furthermore, cytotoxicity evaluation of selected compounds showed significant inhibition of cell proliferation against cervical as well as colon cancer cell lines. 相似文献