Electrochemical properties of PEO/PMMA blend-based polymer electrolytes using imidazolium salt-supported silica as a filler

In this study, the composite polymer electrolytes (CPEs) were prepared by solution casting technique. The CPEs consisted of PEO/PMMA blend as a host matrix doped with LiClO₄. Propylene carbonate (PC) was used as plasticizer and a small amount of imidazolium salt-supported amorphous silica (IS-AS) as a filler was prepared by the sol–gel method. At room temperature, the highest conductivity was obtained for the composition having PEO–PMMA–LiClO₄–PC–4wt. % IS-AS with a value of 1.15 × 10^?4 S/cm. In particular, the CPE using the IS-AS filler showed a higher conductivity than any other sample (fumed silica, amorphous silica). Studies of differential scanning calorimetry and scanning electron microscopy indicated that the ionic conductivity increase was due to an expansion in the amorphous phase which enhances the flexibility of polymeric chains and the homogeneous structure of CPEs. It was found that the ionic conductivity and interfacial resistance stability of CPEs was significantly improved by the addition of IS-AS. In other words, the resistance stability and maximum ambient ionic conductivity of CPEs containing IS-AS filler were better than CPEs containing any other filler.     

Fully crosslinked poly(styrene‐co‐divinylbenzene) microspheres by precipitation polymerization and their superior thermal properties

Fully crosslinked, stable poly(styrene‐co‐divinylbenzene) microspheres, which are composed of various concentrations of divilylbenzene from 5 to 75 mol % based on styrene monomer, were prepared without a significant particle coagulation by the precipitation polymerization. The number‐average particle diameter ranged from 3.5 to 2.8 μm and decreased with an increasing concentration of divinylbenzene in monomer. In addition, the coefficient of variation of the microspheres was slightly reduced with the increasing concentration of divinylbenzene. The circularity and the measured specific surface area indicated that lesser particles are coagulated because of the improved stability of individual particles at a high divinylbenzene concentration and that the resulting particles have a smooth surface without micropores. The glass‐transition temperature was not observed for all microspheres formed from the range of divinylbenzene concentrations. In addition, the onset of the thermal‐degradation temperature was increased from 339.8 to 376.9 °C upon higher contents of divinylbenzene. On the basis of the DSC and thermogravimetric data, the polymer microspheres prepared by the precipitation polymerization possessed a fully crosslinked structure and highly enhanced thermal stability. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 835–845, 2004     

Surface Modification Effect and Electrochemical Performance of LiOH-High Surface Activated Carbon as a Cathode Material in EDLC

This study aimed to improve the performance of the activated carbon-based cathode by increasing the Li content and to analyze the effect of the combination of carbon and oxidizing agent. The crystal structure and chemical structure phase of Li-high surface area activated carbon material (Li-HSAC) was analyzed by X-ray diffraction (XRD) and Raman spectroscopy, the surface state and quantitative element by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) and the surface properties with pore-size distribution by Brunauer–Emmett–Teller (BET), Barrett–Joyner–Halenda (BJH) and t-plot methods. The specific surface area of the Li-YP80F is 1063.2 m²/g, micropore volume value is 0.511 cm³/g and mesopore volume is 0.143 cm³/g, and these all values are higher than other LiOH-treated carbon. The surface functional group was analyzed by a Boehm titration, and the higher number of acidic groups compared to the target facilitated the improved electrolyte permeability, reduced the interface resistance and increased the electrochemical properties of the cathode. The oxidizing agent of LiOH treated high surface area of activated carbon was used for the cathode material for EDLC (electric double layer capacitor) to determine its electrochemical properties and the as-prepared electrode retained excellent performance after 10 cycles and 100 cycles. The anodic and cathodic peak current value and peak segregation of Li-YP80F were better than those of the other two samples, due to the micropore-size and physical properties of the sample. The oxidation peak current value appeared at 0.0055 mA/cm² current density and the reduction peak value at –0.0014 mA/cm², when the Li-YP80F sample used to the Cu-foil surface. The redox peaks appeared at 0.0025 mA/cm² and –0.0009 mA/cm², in the case of using a Nickel foil, after 10 cycling test. The electrochemical stability of cathode materials was tested by 100 recycling tests. After 100 recycling tests, peak current drop decreased the peak profile became stable. The LiOH-treated high surface area of activated carbon had synergistically upgraded electrochemical activity and superior cycling stability that were demonstrated in EDLC.     

PVP-functionalized nanometre scale metal oxide coatings for cathode materials: successful application to LiMn2O4 spinel nanoparticles

PVP functionalized metal oxide coatings on spinel nanoparticles demonstrated significantly improved rate characteristics under extensive cycling at 65 degrees C and exhibited over 100% improved capacity retention compared to the bare counterpart.     

Magnetic field effect and controlling of Li amounts of cathode material for high performance in LIC

Journal of Solid State Electrochemistry - Li-doped high surface area of activated carbon (LHSAC) for Li ion capacitor (LIC) has been prepared by controlling the LiOH amounts for surface...     

Mechanism of the formation of stable microspheres by precipitation copolymerization of styrene and divinylbenzene

Fully crosslinked, stable poly(styrene‐co‐divinylbenzene) microspheres were prepared by precipitation polymerization, and a new mechanism is proposed, based on the morphology, circularity, and specific surface area. Once the stable particles were generated by aggregation of the primary nucleus particles, they grew in size by absorbing oligomeric species without generating substantial pores. The investigation was carried out characterizing the particles in the polymerization time and in various concentrations of the polymerization ingredients. Particle size continuously grew, but the uniformity and circularity of the microspheres were reduced with polymerization time because of the higher reactivity of divinylbenzene. The measured specific surface areas of the microspheres all were less than 10 m²/g, which showed good agreement with calculated values under an assumption of no pores on the surface of the microspheres. Thus, the specific surface area of the microspheres supported the proposed mechanism. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3967–3974, 2004     

Effect of the polymerization parameters on the morphology and spherical particle size of poly(styrene-<Emphasis Type="Italic">co</Emphasis>-divinylbenzene) prepared by precipitation polymerization

Poly(styrene-co-divinylbenzene) microspheres having a diameter range of 3.0–4.5 µm were synthesized by precipitation polymerization under various conditions, then the effects of the polymerization parameters such as monomer and initiator concentration, and used cosolvents on the characteristics of the final particles were compared with those in dispersion polymerization. It was found that precipitation polymerization is more sensitive to polymerization conditions than dispersion polymerization, and that precise control of polymerization parameters is therefore essential for individually stable spherical particles. Monomer and initiator concentration, and the use of cosolvents significantly vary the morphology and the size of the final particles. However, the uniformity of the microspheres is not greatly affected by the polymerization parameters.