Selective pressurized liquid extraction of polychlorinated biphenyls from fat-containing food and feed samples influence of cell dimensions, solvent type, temperature and flush volume

Sulphuric acid impregnated silica was used for the lipid free extraction of polychlorinated biphenyls from fat containing food and feed matrices using pressurized liquid extraction on a Dionex ASE300, with 34 mL cells. Data were compared to a previous publication where extractions had been performed on a Dionex ASE200, with 33 mL cells. Four different fat/fat retainer ratios (FFRs) were tested (0.100, 0.075, 0.050 and 0.025) at 50 and 100 degrees C using n-pentane, n-hexane or n-heptane as extraction solvent. The best results were obtained with a FFR of 0.025 when applying a temperature of 100 degrees C. Both n-pentane and n-heptane were capable of replacing n-hexane as extraction solvent. A flush volume of 60% was sufficient as suggested in US Environmental Protection Agency Method 3545. The applicability of the method was demonstrated for naturally contaminated fish meal as well as various spiked and certified materials.     

Lecithin/propanol-based microemulsions used as media for a cholesterol oxidase-catalyzed reaction

Reverse micelles, Winsor III and IV systems were examined as reaction media for the enzymatic conversion of cholesterol to cholestenone by cholesterol oxidase at 298.2 K. The micelles and the microemulsions, stabilized by soybean lecithin and ethanol or 1-propanol as cosolvent, were characterized with respect to phase behavior and distribution of 1-propanol between the phases of the Winsor III systems. The used oils were dodecane, tetradecane, and hexadecane. The Winsor IV systems and the surfactant-rich phase in the Winsor III systems exhibit bicontinuous structures. The reaction yield for the enzymatic conversion performed in a Winsor IV system was much higher than in a Winsor III system or in reverse micelles.     

Stereoselectivity and competing reactions as studied by lipase-catalyzed esterifications in aqueous lecithin-based gelatin gels

 The enzyme catalyzed conversion of R/S-(±)-2-octanol with hexanoic acid to R/S-(±)-2-octyl hexanoate has been studied in different microenvironments and in the presence of the competing substrate ethanol. The reactions were performed in various gels made from aqueous gelatin solutions and liposome dispersions or isotropic liquid solutions, with or without oil and ethanol. The lipase Candida sp. (SP 525) was dissolved in the dispersions or solutions stabilized by the naturally occurring zwitterionic surfactant soybean lecithin. The sectioned porous gel was immersed in hexane containing 0.33 mol dm^-3 of racemic 2-octanol and hexanoic acid. Since ethanol acts both as a substrate and as a part of the gel it is of fundamental interest to know the phase behaviour of the used systems. Partial phase diagrams for the systems ethanol–water–soybean lecithin and ethanol/water (7:3)–oil–soybean lecithin were determined at 298.2 K. The oil was either castor oil or hexadecane. The conversion of R-2-octyl hexanoate was about 0.45 when no or small amounts of ethanol was present, but decreased considerably with high amounts of ethanol present and ethyl hexanoate became the main product. Hydrolysis of R-2-octyl hexanoate was favoured in the latter systems and hexanoic acid formed was immediately esterified to ethyl hexanoate. The conversion of R-2-octyl hexanoate and ethyl hexanoate depends only on the ethanol content present in the systems and is thus independent of the environment of the enzyme. However, the chiral esters synthesized from racemic 2-octanol and hexanoic acid showed high optical purities regardless of the ethanol content. Received: 1 July 1996 Accepted: 30 August 1996     

Analytical methods used to measure acrylamide concentrations in foods

The state-of-the-art of analysis for acrylamide in food is reviewed. The majority of analytical methods adopts a similar approach: addition of internal standard to the specimen, extraction with water, purification of extract using a solid-phase extraction cartridge, and then determination using either gas chromatography coupled to mass spectroscopy (GC/MS) after bromination, or direct measurement with liquid chromatography coupled to mass spectroscopy (LC/MS). The available methods generally show good agreement and are likely to be accurate. However, improvements in precision (within-laboratory) and repeatability (between-laboratory) are needed by particular data users.     

Synthesis of 1,4-disubstituted (E,Z)-1,3-dienes from lithium dicyclohexyl(trans-1-alkenyl)(1-alkynyl)borates

Treatment of lithium dicyclohexyl(trans-1-alkenyl)(1-alkynyl)borates with either boron trifluoride etherate or tri-n-butyltin chloride results in the preferential migration of the alkenyl group from boron to the adjacent alkynyl carbon atom. Protonolysis of the resultant organoboron intermediates with acetic acid affords the corresponding 1,4-disubstituted (E,Z)-1,3-dienes in good yields, provided that the (Z)-alkenyl moiety of the diene does not contain a tertiary alkyl group. Demonstration that this novel procedure is applicable for the preparation of (E,Z)-1,3-dienes containing functional groups has been shown by the synthesis in 66% yield of methyl (10E, 12Z)-hexadecadienoate, a precursor via lithium aluminium hydride reduction of the sex pheromone of the female silk moth, Bombyx mori.     

Non-equilibrium dynamics for impurities in semiconductors

This paper summarizes the ‘first-principles’ calculations of the vibrational properties of impurities, which are critical to the optical identification of defects. The issue of temperature control for non-equilibrium molecular dynamics (NEMD) is discussed. Applications of NEMD include the calculations of the temperature-dependence of vibrational lifetimes and of the thermal conductivity of semiconductors as a function of their impurity content.     

Reconstructing Binary Signals from Local Histograms

In this paper, we considered the representation power of local overlapping histograms for discrete binary signals. We give an algorithm that is linear in signal size and factorial in window size for producing the set of signals, which share a sequence of densely overlapping histograms, and we state the values for the sizes of the number of unique signals for a given set of histograms, as well as give bounds on the number of metameric classes, where a metameric class is a set of signals larger than one, which has the same set of densely overlapping histograms.     

Effects of feedback from collimating, focusing, and spot-array generating outcoupler gratings in surface-emitting semiconductor lasers

We experimentally demonstrate that a grating outcoupler used for complex beam shaping (spot-array generation) can produce unintentional optical feedback that severely disturbs the integrated in-plane laser that illuminates the coupler. Simulations show that these outcouplers, in contrast to conventional collimating or focusing outcouplers, tend to produce high levels of feedback in spite of the detuning used to suppress feedback. Further, this feedback is focused to high intensity in the laser gain medium. This focused light acts as a seed for the nonlinear self-focusing that causes wave-front distortion and filamentation, which degrades the beam quality.     

The Formation of Porous Membranes by Filtration of Aerosol Nanoparticles

Flame-generated aerosol particles of Al₂O₃ were deposited by gas filtration on two types of porous and ceramic tubes of -Al₂O₃ with mean pore diameters of 450 and 2700nm, respectively. The particles were aggregates with average mobility diameters in the range of 30–100nm and primary particle diameters of 4–8nm. The particles are characterized by differential mobility analysis, transmission electron microscopy, and by their specific surface area. The deposited membranes are characterized by gas permeability measurements, scanning electron microscopy, and by their pore size distribution from nitrogen capillary condensation. The particles form a distinct, homogeneous membrane layer with a porosity of 90% on top of the substrate surface and only penetrate slightly into the substrate structure. The mean pore sizes of the deposited membranes determined by nitrogen condensation agree approximately with those determined by gas permeation and the specific surface area. The mean pore diameter varies in the range of 30–70nm. The gas permeability of the deposited membranes is related to the specific surface area but influenced by the high porosity. The mean pore size and the permeability of the membranes are almost independent of the substrate structure.The development of a membrane with uniform properties is preceded by a short initial period in which the deposited particles, with an equivalent membrane thickness of roughly 2m, have a significantly lower permeability than the ultimately developed uniform membrane layer. This effect is particularly significant for the aerosol particles with the lowest mean size, probably due to particles deposited in the pore mouths of the substrate.The particles and the deposited membranes are X-ray amorphous but retain their specific surface area on heating to even high temperatures. When the membranes are heated to 1473K for 10h, X-ray diffraction shows a mixture of - and -alumina, accompanied by a partial disintegration of the membrane and a considerable loss of surface area.