A numerical and experimental investigation of the interactions between a non‐uniform planar array of incompressible free jets

The interaction between multiple incompressible air jets has been studied numerically and experimentally. The numerical predictions have been first validated using experimental data for a single jet configuration. The spreading features of five unequal jets in the configuration of one larger central jet surrounded by four smaller equi‐distant jets, have been studied, for different lateral spacing ratios of 1.5, 2.0 and 2.5 and a central jet Reynolds number of 1.24×105 (corresponding to a Mach number of 0.16). Flow of five equal jets has also been simulated, for the sake of comparison. The jet interactions commence at an axial distance of about 3–4 diameters and complete by an axial distance of about 10 diameters for the lowest spacing ratio of 1.5. For larger spacing ratios, the length required for the start and completion of jet interaction increase. Peripheral jets bend more towards the central jet and merge at a smaller distance, when their sizes are smaller than that of the central jet. The entrainment ratio for multiple jets is higher than that for a single jet. Excellent agreement is observed between the experimental data and theoretical predictions for both mean flow field and turbulent quantities, at regions away from the jet inlet. The potential core length and initial jet development, however, are not predicted very accurately due to differences in the assumed and actual velocity profiles at the jet inlet. Copyright © 2004 John Wiley & Sons, Ltd.     

Simulation model for shapiro time delay and light deflection experiments

The time delay experiment proposed by I.I. Shapiro in 1964 and conducted in the seventies was the most precise experiment of general relativity until that time. Further experimentation has improved the accuracy level of both the time delay and the light deflection experiments. A simulation model is proposed that involves only a simple mass and time transformation factor involving velocity of light. The light deflection and the time delay experiments are numerically simulated using this model that does not use the general relativistic equations. The computed values presented in this paper compare well with recent levels of accuracy of their respective experimental results.     

Origin of the lower critical flocculation temperature in polymer colloids stabilized by polydimethylsiloxane

Summary It has recently been reported (6, 7) that poly(methyl methacrylate) particles that are sterically stabilised by polydimethylsiloxane flocculate on cooling when dispersed in short chain n-alkanes. Since the LCFT was reported to be essentially independent of the nature of the dispersion medium, it was postulated (2) that incipient flocculation of these particles was caused by crystallisation of the polydimethysiloxane chains, which would have allowed the attractive van der Waals forces to become operative. This hypothesis has now been confirmed by low temperature X-ray studies.

---

Zusammenfassung Von (6, 7) wurde kürzlich mitgeteilt, daß Poly(methylmethacrylat)-Teilchen, die mit Polydimethylsiloxan sterisch stabilisiert sind, in kurzkettigenn-Alkanen als Dispersionsmittel ausflocken. Da die LCFT im wesentlichen unabhängig von der Natur des Dispersionsmediums ist, wurde von (2) angenommen, daß die beginnende Ausflockung dieser Teilchen auf eine Kristallisation der Polydimethylsiloxan-Ketten zurückzuführen ist, bedingt durch die wirkenden van der Waals-Anziehungskräfte. Diese Hypothese wurde nun durch Röntgenuntersuchungen bei tiefer Temperatur bestätigt.

---

---

With 1 figure     

Conformations of trimethoxymethylsilane: matrix isolation infrared and ab initio studies

Conformations of trimethoxymethylsilane were studied using matrix isolation infrared spectroscopy and ab initio computations. Trimethoxymethylsilane was trapped in both argon and nitrogen matrixes using heated nozzle effusive sources and a supersonic jet source, in an effort to alter the conformational population in the matrix. Ab initio calculations were carried out at the HF and B3LYP level using 6-31++G basis set to support our experimental observations. The frequencies computed at the B3LYP level was found to fit well with our experimental data. A conformer with a C1(g(+/-)g(+/-)t) structure was predicted by our computations to be the ground state conformer.     

Low molecular weight organogels based on long-chain carbamates

Thermoreversible organogels were prepared from carbamates with alkyl side chains of different lengths. Gelation was possible only up to an alkyl side chain length of 12 carbons, beyond which crystallization occurs, due to the dominant van der Waals interaction between the alkyl chains. This is in contrast to other alkane-based organogels, in which gelating efficiency increased with the length of the alkane chain (see Abdallah, D. J.; Weiss, R. G. Adv. Mater. 2000, 12, 1237). The critical concentration for gelation decreases drastically with an increase in the side chain length. Xerogels of these show birefringent fibers with uniform cross section and unlimited growth in one direction. The extent of this unlimited growth is affected by the length of the alkyl side chain in the carbamate, which finally ceases the gel formation ability of the carbamate. Cryogenic scanning electron microscopy images of the gels are similar to those of xerogels. From X-ray diffraction of the fibers, we propose that the growth direction is along the plane of hydrogen bonds between the carbamate molecules. The thickness of the fibers depends on the length of the alkyl side chain. Morphological differences are seen between gels prepared by slow cooling and quenching of the solution. Thus, the morphology of the fibrous xerogels of the carbamates can be tailored for specific applications, by the choice of the alkyl side chain length and the rate of cooling the solution.     

MODEL SIMULATION OF WATER-IN-OIL XANTHAN FERMENTATION

The W/O xanthan fermentation is simulated by integrating the microbial kinetic behaviors and the multiple-phase process characteristics. Model 1 assumes uniform redistribution of cells, substrates and product by frequent droplet breakup and coalescence. Model 2 simulates the system of viscous aqueous phase with minimal droplet breakup and component redistribution. The real fermentation should proceed within the bounds set by the two models. Effects of various parameters are evaluated. The aqueous-phase xanthan concentration (X_n) and volumetric productivity (Q_P) achieved at 200 h are used as the indicators. X_n and Q_P increase with nitrogen-source concentration (S_NO) initially but plateau (Model 1) or decrease slightly (Model 2) at high S_NO. X_n (at 200 h) decreases with increasing aqueous-phase volume fraction (f). Q_P, however, increases with f reflecting its basing on the total dispersion volume. Increasing agitation and aeration result in higher X_n and Q_P. The higher agitation enhances the G/O interfacial oxygen transfer and reduces the droplet size. Increasing aeration improves the G/O interfacial transfer but increases the droplet size. Its net positive effect implies a rate-limiting step at G/O interface. The W/O fermentation can produce far higher X_n (> 200 kg/m3) and Q_P( > 0.8 kg/m3-h) than the conventional fermentation (X_n ～ 50 kg/m3, Q_P ～ 0.5 kg/m3-h).     

Preparation of Graphene oxide- CuInS2/ZnS Quantum dots Nanocomposite as “Turn-On” Fluorescent Probe for the Detection of Polycyclic Aromatic Hydrocarbons in Aqueous Medium

Journal of Fluorescence - Graphene oxide is well known for its adsorption properties with aromatic compounds. In this study, graphene oxide and eco-friendly ternary CuInS2/ZnS QDs were used to...     

Quantifying induced electric field strengths during gene transfer to the intact rat vasculature

The application of appropriate electric fields to cells and tissues, termed electroporation, can result in efficient and safe gene transfer. We have shown previously that this approach results in high level gene transfer to and expression in the vasculature of living animals. This paper presents the results of an electric field distribution study of a rat mesenteric vasculature model using the Finite-Element Time-Domain (FETD) technique. A novelty of this work is the use of Debye dispersive dielectric parameters, as the electrical response of biological tissues is inherently frequency-dependent. The results compare fairly well with experimental findings.