Comparative analysis of refrigerant performance between LPG and R134a under subtropical climate

Journal of Thermal Analysis and Calorimetry - In this investigation, a series of experiments were conducted to explore the effects of liquefied petroleum gas (LPG) mixture of 60% propane and 40%...     

Assessment of high-resolution methods for numerical simulations of compressible turbulence with shock waves

Flows in which shock waves and turbulence are present and interact dynamically occur in a wide range of applications, including inertial confinement fusion, supernovae explosion, and scramjet propulsion. Accurate simulations of such problems are challenging because of the contradictory requirements of numerical methods used to simulate turbulence, which must minimize any numerical dissipation that would otherwise overwhelm the small scales, and shock-capturing schemes, which introduce numerical dissipation to stabilize the solution. The objective of the present work is to evaluate the performance of several numerical methods capable of simultaneously handling turbulence and shock waves. A comprehensive range of high-resolution methods (WENO, hybrid WENO/central difference, artificial diffusivity, adaptive characteristic-based filter, and shock fitting) and suite of test cases (Taylor–Green vortex, Shu–Osher problem, shock-vorticity/entropy wave interaction, Noh problem, compressible isotropic turbulence) relevant to problems with shocks and turbulence are considered. The results indicate that the WENO methods provide sharp shock profiles, but overwhelm the physical dissipation. The hybrid method is minimally dissipative and leads to sharp shocks and well-resolved broadband turbulence, but relies on an appropriate shock sensor. Artificial diffusivity methods in which the artificial bulk viscosity is based on the magnitude of the strain-rate tensor resolve vortical structures well but damp dilatational modes in compressible turbulence; dilatation-based artificial bulk viscosity methods significantly improve this behavior. For well-defined shocks, the shock fitting approach yields good results.     

Numerical study of bubble rise and interaction in a viscous liquid

In this article, the flow instabilities during the rise of a single bubble in a narrow vertical tube are studied using a transient two-dimensional/axisymmetric model. To predict the shape of the bubble deformation, the Navier-Stokes equations in addition to an advection equation for liquid volume fraction are solved. A modified volume-of-fluid technique based on Youngs' algorithm is used to track the bubble deformation. To validate the model, the results of simulations for terminal rise velocity and bubble shape are compared with those of the experiments. The effect of different parameters such as initial bubble radius, channel height, liquid viscosity and surface tension on the shape and rise velocity of the bubble is investigated.     

Highly selective enrichment of phosphopeptides using poly(dibenzo‐18‐crown‐6) as a solid‐phase extraction material

A poly(dibenzo‐18‐crown‐6) was used as a new solid‐phase extraction material for the selective enrichment of phosphopeptides. Isolation of phosphopeptides was achieved based on specific ionic interactions between poly(dibenzo‐18‐crown‐6) and the phosphate group of phosphopeptides. Thus, a method was developed and optimized, including loading, washing and elution steps, for the selective enrichment of phosphopeptides. To assess this potential, tryptic digest of three proteins (α‐ casein, β‐casein and ovalbumin) was applied on poly(dibenzo‐18‐crown‐6). The nonspecific products were removed by centrifugation and washing. The spectrometric analysis was performed using matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. Highly selective enrichment of both mono‐ and multiphosphorylated peptides was achieved using poly(dibenzo‐18‐crown‐6) as solid‐phase extraction material with minimum interference from nonspecific compounds. Furthermore, evaluation of the efficiency of the poly(dibenzo‐18‐crown‐6) was performed by applying the digest of egg white. Finally, quantum mechanical calculations were performed to calculate the binding energies to predict the affinity between poly(dibenzo‐18‐crown‐6) and various ligands. The newly identified solid‐phase extraction material was found to be a highly efficient tool for phosphopeptide recovery from tryptic digest of proteins.     

The Development of a Green Innovative Bioactive Film for Industrial Application as a New Emerging Technology to Protect the Quality of Fruits

Today, the most significant challenge encountered by food manufacturers is degradation in the food quality during storage, which is countered by expensive packing, which causes enormous monetary and environmental costs. Edible packaging is a potential alternative for protecting food quality and improving shelf life by delaying microbial growth and providing moisture and gas barrier properties. For the first time, the current article reports the preparation of the new films from Ditriterpenoids and Secomeliacins isolated from Melia azedarach (Dharek) Azadirachta indica plants to protect the quality of fruits. After evaluating these films, their mechanical, specific respirational, coating crystal elongation, elastic, water vapor transmission rate (WVTR), film thickness, and nanoindentation test properties are applied to apple fruit for several storage periods: 0, 3, 6, 9 days. The fruits were evaluated for postharvest quality by screening several essential phytochemical, physiological responses under film coating and storage conditions. It was observed that prepared films were highly active during storage periods. Coated fruits showed improved quality due to the protection of the film, which lowered the transmission rate and enhanced the diffusion rate, followed by an increase in the shelf life. The coating crystals were higher in Film-5 and lower activity in untreated films. It was observed that the application of films through dipping was a simple technique at a laboratory scale, whereas extrusion and spraying were preferred on a commercial scale. The phytochemicals screening of treated fruits during the storage period showed that a maximum of eight important bioactive compounds were present in fruits after the treatment of films. It was resolved that new active films (1–5) were helpful in the effective maintenance of fruit quality and all essential compounds during storage periods. It was concluded that these films could be helpful for fruits growers and the processing industry to maintain fruit quality during the storage period as a new emerging technology.     

Investigation on inter-modulation products (IMPs) for IM-DD SCM optical links

The implementation of the subcarrier multiplexing (SCM) as the signaling format has been extensively researched in various analog and digital lightwave based broadband applications because of its promising versatility, cost effectiveness, convenient and simple offerings. However performance degradation is a matter of serious concern in such multi-channel intensity modulation-direct detection (IM-DD) systems caused by inter-modulation distortion (IMD) mechanism. In this paper the impact of key operational and physical parameters of a laser source on an IMD dominated two-tone IM-DD SCM system has been investigated which can thereby be exploited favorably to develop a reasonably IMD immune optical link.     

Influence of laser treatment on the adsorption interaction of cadmium sulfide films with oxygen

During interaction of pulsed laser radiation with the surface of polycrystalline cadmium sulfide films an enrichment of sulfur vacancies near the surface was previously observed. In this paper, the adsorption-desorption sensitivity (ADS) of the cadmium sulfide film to oxygen was determined by the temperature dependence of the dark current. In this case, the sulfur vacancies serve as adsorption centers. The presence of surface and volume components of ADS was detected. Here the surface portion of ADS remains essentially unchanged, but the volume component grows with increase in the radiation dose.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 3, pp. 82–85, March, 1990.     

Suitability of artificial bulk viscosity for large-eddy simulation of turbulent flows with shocks

The artificial bulk viscosity method to numerically capture shocks is investigated for large-eddy simulation (LES). Different variations of this method are tested on a turbulent flow over a cylinder at Reynolds number of 10,000 and free-stream Mach number of 0.85. The artificial bulk viscosity model by Cook and Cabot, which is parameterized by the strain rate magnitude, is found to provide unnecessary bulk viscosity in turbulent regions away from shocks. While developed turbulent structures are found unaffected, this extra bulk viscosity is shown to significantly damp the sound field. An alternative formulation of the model which is parameterized by the rate of dilatation is proposed. This formulation is shown to avoid the unnecessary bulk viscosity and enhance the sound-prediction capability of the model. It was found that standard LES combined with artificial bulk viscosity is a promising approach for simulation of turbulent flows with shocks. The formulation of the model on curvilinear coordinates is presented in the appendix.     

THE MULTI-FOLD COMMUTATOR OF VARIATION OF POTENTIAL IN CHIRAL MODEL AND SDYM FIELD

The multi-fold commutaror representation of hidden symmetry algebra in principal chiral model and the self-dual Yang-Mills field is explicitly shown. All the variations are taken with respect to the potential A_ξ other than field quantity g for principal chiral model in defining the usual operator Q(ξ,η) to give the G⊗c(t) algebra.