Mössbauer, X-ray, electrical and magnetic properties of lithium borosilicate glasses containing iron and manganese Part I. Mössbauer measurements

The effect of the replacement of MnO₂ by Fe₂O₃ on the oxidation states of iron in some lithium borosilicate glasses were studied using Mössbauer spectroscopy. DTA and infrared measurements showed the presence of two glassy phases, one of them containing iron and the other manganese. The Mössbauer spectra were measured at room temperature for all the glass samples. The spectra revealed the presence of Fe ions only in ferric state in both tetrahedral and octahedral coordination. Also, it was observed that the ratio between the number of iron ions in both coordination states has not changed with the increase of MnO₂ content.     

Amine‐blocked polyisocyanates. I. Synthesis of novel N‐methylaniline‐blocked polyisocyanates and deblocking studies using hot‐stage fourier transform infrared spectroscopy

A series of substituted N‐methylaniline‐blocked polyisocyanates based on 4,4′‐methylenebis(phenyl isocyanate) and poly(tetrahydrofuran) were prepared and characterized thoroughly with FTIR, ¹H NMR, and ¹³C NMR spectroscopy methods. Compared with unsubstituted N‐methylaniline, a blocking agent with an electron‐releasing substituent at the para position took a shorter time, whereas those with an electron‐releasing substituent at the ortho position or an electron‐withdrawing substituent at the ortho and para positions took longer times for the blocking reaction. The thermal dissociation reactions of blocked polyisocyanates were carried out with an FTIR spectrophotometer attached to hot‐stage accessories under dynamic and isothermal conditions. The dynamic method was used to determine the deblocking temperature, and the isothermal method was used to calculate the deblocking kinetics and activation parameters. The cure times of blocked polyisocyanates with hydroxyl‐terminated polybutadiene were also determined. The deblocking temperatures, the results of cure‐time studies, and the kinetic parameters revealed that the thermal dissociation of the N‐methylaniline‐blocked polyisocyanates was retarded by electron‐donating substituents and facilitated by electron‐withdrawing substituents. The action of N‐methylanilines as blocking agents for isocyanate was explained by the formation of a four‐center, intramolecularly hydrogen‐bonded ring structure during the thermal dissociation of the blocked polyisocyanates. The formation of such a hydrogen‐bonded ring structure was confirmed and supported by variable‐temperature ¹H NMR studies and entropy parameters, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1557–1570, 2007     

土壤盐渍化的研究进展

根据近年来国内外土壤学者在土壤盐渍化的研究成果，从土壤盐渍化的基本理论，改良方法以及预测预报方面的研究，综述了土壤盐渍化的研究现状，通过分析土壤盐渍化研究多方面存在的问题，对其发展趋势和今后研究重点进行了展望，望能为进一步的深入研究工作提供帮助．     

Flow injection titrimetric analysis of vitamin C in pharmaceutical products

A flow injection titrimetric method for the assay of vitamin C using cerium(IV) was developed. A 157 mul vitamin C solution was injected into a carrier stream of 7.48 x 10(-3)M cerium(IV) prepared in 0.10M sulfuric acid flowing at a rate of 5.0 ml/min. A 1.3 ml mixing chamber was employed for dispersion of the resultant solution which was propelled through a flow-through cell and detected using the spectrophotometer at a wavelength monitored at 410 nm. The method was applied to the determination of vitamin C in pharmaceutical preparations and a high accuracy was attained when compared with the British Pharmacoepeia (BP) method. Excellent precision indicated by a relative standard deviation of less than 0.9% was always obtained. No interferences were encountered and as many as 36 samples per hour were reached for throughput.     

Synthesis and properties of a new member of the calixnaphthalene family: a C(2)-symmetrical endo-calix[4]naphthalene

The synthesis of a new endo-calix[4]naphthalene is described. The reaction sequence involves the cyclocondensation of a key bisnaphthylmethane intermediate (8) with formaldehyde. This key intermediate (8) is formed using a modified Suzuki-Miyaura Pd-catalyzed cross-coupling reaction between bromomethylnaphthyl (6) and naphthylboronic acid (7), both of which can be derived from 2-hydroxynaphthoic acid.     

Integrated production of ethanol fuel and protein from Coastal Bermudagrass

The herbaceous crops that may provide fermentable carbohydrates for production of fuels and chemicals also contain 10–20% protein. Protein coproduction with biomass-derived fuels and chemicals has important advantages: (1) food and fuel production can be integrated, and (2) protein is a high-value product that may significantly improve overall process economics. We report the results of an integrated approach to producing protein and fermentable sugars from one herbaceous species, Coastal Bermudagrass (CBG). The ammonia fiber explosion (AFEX) process makes possible over 90% conversion of cellulose and hemicellulose to simple sugars (about 650 mg reducing sugars/g dry CBG) at 5 IU cellulase/g vs < 20% conversion for untreated CBG. The AFEX treatment also improves protein extraction from CBG; over 80% protein recovery is possible from AFEX-treated CBG vs about 30% recovery from untreated CBG.     

Sequential optimization of a flow injection spectrophotometric method for the assay of chlorpromazine in pharmaceutical preparations

A new simple flow injection spectrophotometric method for the assay of chlorpromazine using cerium(IV) in sulfuric acid media was developed. The oxidized form of the drug was monitored at the maximum absorbance of 526 nm. The optimum conditions were 0.035M sulfuric acid, 3.80 x 10(-3)M cerium(IV), flow rate 4.85 ml/min, coil length 45 cm and sample size 110 mm(3). Optimization was carried out by the modified simplex method. Response surface methodology was employed to investigate the ruggedness of the method. A sampling frequency of 120 hr(-1) was attained. Relative standard deviations for standard sample were usually less than 0.75. The method was applied to the determination of chlorpromazine in proprietary drugs and results were statistically compared with the official British Pharmacopoeia (BP) method.     

Fast Efficient Method for Radiolabeling of Pindolol with Iodine-125 Using Iodogen Coated Glass Frit

Although ¹²⁵I-hydroxypindolol (¹²⁵I-HYP) has been an excellent probe of adenoceptor function in certain tissues, but ¹²⁵I-pindolol (¹²⁵I-PIN) was found more specific for -adrenoceptor labeling. This study describes a fast and efficient method for radiolabeling of pindolol with iodine-125, where both chloramine-T and iodogen were used as oxidizing agents. The use of iodogen coated glass frit has a great advantage in increasing the radiochemical yield of ¹²⁵I-pindolol and this was attributed to the increase of the interphaces boundary between the solid and liquid. This technique reduces the quantity of iodogen required to produce high radiochemical yield by its half. The radiochemical yield was determined by TLC system using chloroform: acetic acid: water (15:4:1) as developing solvent and by HPLC using reversed phase RP-18 column and acetonitrile: 0.1M ammonium bicarbonate pH 7.5 (1:1) as a mobile phase at flow rate (1ml/min). The radiochemical yield was found to be 48.6 and 62.9% respectively.     

Polarographic behaviour and determination of paracetamol and salicylamide after treatment with nitrous acid

A polarographic procedure is described for the determination of paracetamol (acetaminophen) and salicylamide after treatment with nitrous acid. The different experimental parameters affecting the derivatization process and the polarographic analysis were studied. The derivatization products were found to be reduced at the dropping mercury electrode over the whole pH range in Britton-Robinson buffers. At pH 7.0, well defined diffusion-controlled cathodic waves were produced for both compounds. Plots of limiting current vs. concentration were linear over the ranges 0.05–0.75 and 0.25–1.5mM for paracetamol and salicylamide, respectively, in the d.c. mode, with minimum detectability of 2.5 × 10^–6 and 1.25 × 10^–5 M, respectively. The procedure was applied to the analysis of some pharmaceutical dosage forms and the results were in good agreement with those obtained by official and compendial methods.     

Extraction spectrophotometric determination of mercury(II) using thiacrown ethers and Bromocresol Green

A reasonably sensitive and highly selective spectrophotometric method for the determination of mercury(II) is proposed. The method is based on the extraction of the ion-associate formed by a mercury(II) thiacrown ether cationic complex with Bromocresol Green as the anionic counter-ion using chloroform as the extracting solvent. The effect of thiacrown ethers of different cavity sizes, namely 1,4,7,10,13-pentathiacyclopentadecane (PTP) and 1,4,7,10,13,16-hexathiacyclooctadecane (HTO), the thiacrown ether concentration, the extracting solvent, the bromocresol green concentration and the aqueous phase pH on the extraction were investigated. Measurement of the absorbance at the lambda(max) (420 nm) of the extracted ion-associate reveals that Beer's law is obeyed over 0.5-12.0 ppm mercury(II) for both ligands. Slight interference from copper(II) and cadmium(II) is exhibited by the PTP ligand, while HTO is negligibly affected by these metal ions. Strong interference from silver(I) is evident for both ligands while alkali, alkaline earth and other transition metals tested posed negligible interference. Analysis of mercury in synthetic complex mixtures was satisfactory.