Conformal Invariance, Accelerating Universe and the Cosmological Constant Problem

We investigate a conformal invariant gravitational model which is taken to hold at early universe. The conformal invariance allows us to make a dynamical distinction between the two unit systems (or conformal frames) usually used in cosmology and elementary particle physics. In this model we argue that when the universe suffers phase transition, the resulting mass scale introduced by particle physics should have a variable contribution to vacuum energy density. This variation is controlled by the conformal factor which is taken as a dynamical field. We then deal with the cosmological consequences of this model. In particular, we shall show that there is an inationary phase at early times. At late times, on the other hand, it provides a mechanism which makes a large effective cosmological constant relax to a sufficiently small value. Moreover, we shall show that the conformal factor acts as a quintessence field that leads the universe to accelerate at late times.     

H-point standard addition method for the selective simultaneous determination of nickel and copper using 1-(2-pyridylazo)-2-naphthol in Tween 80 micellar media.

The H-point standard addition method (HPSAM) has been applied for the simultaneous determination of nickel and copper in trace levels, using 1-(2-pyridylazo)-2-naphthol (PAN) as a chromogenic reagent in aqueous Tween 80 micellar media. Under the optimum condition, the simultaneous determinations of nickel and copper by HPSAM were performed. The absorbances at one pair of wavelengths, 548 and 579 nm, were monitored with the addition of standard solutions of copper. The method is able to accurately determine copper-to-nickel ratios of 15:1 to 1:10 (Wt/Wt). The effects of diverse ions on the determination of nickel and copper to investigate the selectivity of the method were also studied. The recommended procedure was successfully applied to some water and alloy samples.     

Sequential optimization of a flow injection spectrophotometric method for the assay of chlorpromazine in pharmaceutical preparations

A new simple flow injection spectrophotometric method for the assay of chlorpromazine using cerium(IV) in sulfuric acid media was developed. The oxidized form of the drug was monitored at the maximum absorbance of 526 nm. The optimum conditions were 0.035M sulfuric acid, 3.80 x 10(-3)M cerium(IV), flow rate 4.85 ml/min, coil length 45 cm and sample size 110 mm(3). Optimization was carried out by the modified simplex method. Response surface methodology was employed to investigate the ruggedness of the method. A sampling frequency of 120 hr(-1) was attained. Relative standard deviations for standard sample were usually less than 0.75. The method was applied to the determination of chlorpromazine in proprietary drugs and results were statistically compared with the official British Pharmacopoeia (BP) method.     

催化增强化学蒸气沉积法在聚酰亚胺上沉积钯-铂合金薄层

以N₂，O₂作载气，通过催化增强化学蒸气沉积(CECVD)分别制得在聚酰亚胺上的金属铂、钯及其合金薄层。铂、钯配合物的共同沉积可生成Pt-Pd合金薄膜。在Pd-Pt合金的沉积过程中，Pd/Pt的原子数比率随共同沉积的条件改变而变化。O₂为载气、300 ℃条件下,用Pd(η³-allyl)(hfac)和Pt(COD)Me₂作前驱体共沉积制备Pd-Pt合金，得到含Pd 37.2%，Pt 62.8%且不     

A photoactivated diazopyruvoyl cross-linking agent for bonding tissue containing type-I collagen

On the basis of the earlier examples of diazopyruvoyl (DAP) groups reported by Lawton for covalent binding and cross-linking of proteins and oligopeptides and our recent demonstration that a coumaryl diazopyruvamide was used to label Type-I collagen, we have extended our investigations to the synthesis and cross-linking capabilities of a bis-DAP polyethylene glycol to cross-link Type-I collagen. The new photoactivated cross-linking agent, N,N'-bis(3-diazopyruvoyl)-2,2'-(ethylenedioxy)bis(ethylamine) (DPD, 2), has been designed and synthesized specifically to "weld" collagenous tissues by cross-linking Type-I collagen. A working model for the photochemical welding studies of collagenous tissues was developed using gelatin strips (gel strips) composed of denatured Type-I collagen. Gel strips are transparent to near-UV and visible light, uniform in thickness, and have reproducible composition. Furthermore, the availability of nucleophilic amine sites in gel strips was demonstrated by reaction with o-phthalaldehyde, producing a fluorescent derivative of the protein. Gel strips were coated with a solution of DPD in chloroform 7 irradiated at 320-390 nm, and the resulting bonded gel strips were tested for the strength of the weld. The welds were generally brittle and had average tensile strengths that exceeded 100 N/cm2. Welds were not formed in the absence of light or DPD. Scanning electron microscopy studies revealed a pockmarked surface from severed welds. Welds of rabbit Achilles tendon were also obtained using the tethered diazopyruvamide. These welds were much weaker, having an average tensile strength of 11.95 N/cm2 for DPD-2,2'-ethylenedioxy(bis)ethylamine comonomers in the cross-linking reaction. In both studies the welds obtained by this method were significantly stronger than the controls.     

Synthesis, characterization and Schlenk equilibrium studies of methylmagnesium compounds with O- and N-donor ligands - the unexpected behavior of [MgMeBr(pmdta)] (pmdta = N,N,N′,N″,N″-pentamethyldiethylenetriamine)

MgMe₂ (1) was found to react with 1,4-diazabicyclo[2.2.2]octane (dabco) in tetrahydrofuran (thf) yielding a binuclear complex [{MgMe₂(thf)}₂(μ-dabco)] (2). Furthermore, from reactions of MgMeBr with diglyme (diethylene glycol dimethyl ether), NEt₃, and tmeda (N,N,N′,N′-tetramethylethylenediamine) in etheral solvents compounds MgMeBr(L), (L = diglyme (5); NEt₃ (6); tmeda (7)) were obtained as highly air- and moisture-sensitive white powders. From a thf solution of 7 crystals of [MgMeBr(thf)(tmeda)] (8) were obtained. Reactions of MgMeBr with pmdta (N,N,N′,N″,N″-pentamethyldiethylenetriamine) in thf resulted in formation of [MgMeBr(pmdta)] (9) in nearly quantitative yield. On the other hand, the same reaction in diethyl ether gave MgMeBr(pmdta) · MgBr₂(pmdta) (10) and [{MgMe₂(pmdta)}₇{MgMeBr(pmdta)}] (11) in 24% and 2% yield, respectively, as well as [MgMe₂(pmdta)] (12) as colorless needle-like crystals in about 26% yield. The synthesized methylmagnesium compounds were characterized by microanalysis and ¹H and ¹³C NMR spectroscopy. The coordination-induced shifts of the ¹H and ¹³C nuclei of the ligands are small; the largest ones were found in the tmeda and pmdta complexes. Single-crystal X-ray diffraction analyses revealed in 2 a tetrahedral environment of the Mg atoms with a bridging dabco ligand and in 8 a trigonal-bipyramidal coordination of the Mg atom. The single-crystal X-ray diffraction analyses of [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) showed them to be monomeric with five-coordinate Mg atoms. The square-pyramidal coordination polyhedra are built up of three N and two C atoms in 12 and three N and two Br atoms in 13. The apical positions are occupied by methyl and bromo ligands, respectively. Temperature-dependent ¹H NMR spectroscopic measurements (from 27 to −80 °C) of methylmagnesium bromide complexes MgMeBr(L) (L = thf (4); diglyme (5); NEt₃ (6); tmeda (7)) in thf-d₈ solutions indicated that the deeper the temperature the more the Schlenk equilibria are shifted to the dimethylmagnesium/dibromomagnesium species. Furthermore, at −80 °C the dimethylmagnesium compounds are predominant in the solutions of Grignard compounds 4-6 whereas in the case of the tmeda complex7 the equilibrium constant was roughly estimated to be 0.25. In contrast, [MgMeBr(pmdta)] (9) in thf-d₈ revealed no dismutation into [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) even up to −100 °C. In accordance with this unexpected behavior, 1:1 mixtures of 12 and 13 were found to react in thf at room temperature yielding quantitatively the corresponding Grignard compound 9. Moreover, the structures of [MgMeBr(pmdta)] (9c), [MgMe₂(pmdta)] (12c), and [MgBr₂(pmdta)] (13c) were calculated on the DFT level of theory. The calculated structures 12c and 13c are in a good agreement with the experimentally observed structures 12 and 13. The equilibrium constant of the Schlenk equilibrium (2 9c ? 12c + 13c) was calculated to be K_gas = 2.0 × 10⁻³ (298 K) in the gas phase. Considering the solvent effects of both thf and diethyl ether using a polarized continuum model (PCM) the corresponding equilibrium constants were calculated to be K_thf = 1.2 × 10⁻³ and K_ether = 3.2 × 10⁻³ (298 K), respectively.     

A sequential injection spectrophotometric method for the determination of penicillamine in pharmaceutical products by complexation with iron(III) in acidic media

A simple, robust and sensitive sequential injection spectrophotometric method for the assay of penicillamine (PA) in pharmaceutical formulations is developed. The method was based on the complex formation when PA is reacted with iron(III) solution in hydrochloric acid media. The deep blue colored PA-iron(III) complex produced is monitored at a maximum wavelength of 600 nm. A five level orthogonal array design coupled to genetic algorithm was employed to obtain the optimum experimental conditions for the determination of PA using peak absorbance as the measure of the system's performance criterion. A linear dynamic range for the determination of PA of 25-300 ppm was obtained with a sampling frequency of 50 h⁻¹ and a relative standard deviation of less than 0.98%. The method was successfully applied to the determination of PA in pharmaceutical formulations.     

Method for Visible Light‐Induced Photocatalytic Degradation of Methylparaben in Water Using Nanostructured Ag/AgBr@m‐WO3

An efficient method of photocatalytic degradation of methylparaben in water using Ag nanoparticles (NPs) loaded AgBr‐mesoporous‐WO₃ composite photocatalyst (Ag/AgBr@m‐WO₃), under visible light is presented. In this process, quantification of methylparaben in water was carried out by high‐performance liquid chromatography (HPLC) and the HPLC results showed a significant reduction of methylparaben in water due to the enhanced of photocatalytic degradation efficiency of Ag/AgBr@m‐WO₃. For the material synthesis, highly ordered mesoporous‐WO₃ (m‐WO₃) was initially synthesized by sol–gel method and AgBr nanoparticles (NPs) were subsequently introduced in the pores of m‐WO₃, and finally, the Ag nanoparticles were introduced by light irradiation. The enhanced photocatalytic degradation of methylparaben in water is attributed to the formation of surface plasmonic resonance (SPR) due to the introduction of Ag NPs on the surface of the catalyst. Also, the formation of heterojunction between AgBr and mesoporous‐WO₃ in Ag/AgBr@m‐WO₃ significantly inhibited the recombination of light‐induced electron‐hole pairs in the semiconductor composite. The morphological and optical characterizations of the synthesized photocatalysts (Ag/AgBr@m‐WO₃) were carried out using SEM, TEM, XDR, N₂ adsorption–desorption, UV‐VIS diffuse reflectance spectroscopy (DRS). Also, the photocatalytic studies using radical scavengers were carried out and the results indicated that ${\text{O}}_2^{·-}$ is the main reactive species.     

Radiolysis of iodotyrosines in aqueous-ethanol solutions

⁶⁰Co-gamma radiolysis of 3-iodotyrosine and 3,5-diiodotyrosine in aqueous-ethanol solutions has shown that the chemical effects are mainly determined by the interaction of radicals from the radiolysis of solvent and controlled by the composition of the solution. The influence of varying solvent composition and radiation dose on the amount of iodoamino acid converted and on the yields of the radiolysis products (I₂, I^–, IO ₃ ^– and H₂O₂) formed in aerated solutions at room termperature were investigated. The formation of I₂ is dependent upon the acidity of the solution and is mainly produced as an after-effect due to the interaction of H₂O₂ with I^– ions, both being radiolysis products. The variation of radiation-chemical yields with the solute and solvent composition, and the probable mechanisms for formation of the radiolysis products are discussed.