Analytical study of the performance of minSIS solar cells with a back surface field

The effect of a Back Surface Field (BSF) on the performance of a minority-carrier transparent Semiconductor-Insulator-Semiconductor (minSIS) solar cell has been studied. An analytical one-dimensional model has been developed for the calculation of transport characteristics of minSIS solar cells. Short-circuit current, open-circuit voltage, fill factor and efficiency are then calculated for a sputtered Indium-Tin-Oxide (ITO)-SiO₂-pSi-p ⁺Si solar cell under AM1 illumination for different values ofpSi- andp ⁺ Si-layer thicknesses. It is found that for a large base thickness, the effect of BSF is not significant; however, for a small thickness all the quantities increase with BSF.     

Synthesis and characterization of SPE membrane based on sulfonated FEP‐g‐acrylic acid by radiation induced graft copolymerization for PEM fuel cell

A Novel solid polymer electrolyte (SPE) membrane containing both ? COOH and ? SO₃H group has been prepared by simultaneous method of radiation grafting of acrylic acid onto FEP followed by sulfonation. The presence of weakly acidic acrylic acid controls the swelling in water while ? SO₃H group provides conductivity due to its strongly ionic characteristic. FEP‐g‐acrylic acid and its sulfonated derivatives were characterized by their properties. While the mechanical properties decreased, other properties such as ion exchange capacity (IEC), water uptake and ionic conductivity increased with increase in graft content. These properties further changed on sulfonation. Acrylic acid being weakly acidic in nature, conductivity values of the grafted membrane were quite low. However, introduction of strong ? SO₃H group resulted in conductivity closer to Nafion 117. Few sulfonated membranes have been tested with respect to H₂/O₂ fuel cell performance. Short‐term fuel cell test for 100 hr gave a stable performance. These membranes are less expensive compared to Nafion. Copyright © 2004 John Wiley & Sons, Ltd.     

I-substituted imidazolemanganese(II) complexes

Summary A series of manganese(II) spin-free complexes of the type: MnL_n Cl₂ [L =N-Methylimidazole (MeIm), n = 1,2,3,6; L =_N-ethylimidazole (EtIm), n = 4], MnL_nBr₂ (L = MeIm, n = 2, 4, 6; L = EtIm, n = 4, 6), MnL_nI₂ (L = MeIm, n = 4, 6; L = EtIm, n = 6), MnL_n(NCS)₂ (L = MeIm, n = 3, 4; L = EtIm, n = 4), MnL₆X₂ (L = MeIm, EtIm; X = NO₃, ClO₄, BF₄); (Me₄N)(MnLCl₃)(L = MeIm, EtIm); (Et₄N)[Mn(MeIm)Br₃] and Mn(MeIm)₂(N₃)₂ · 5 H₂O were prepared and characterized. The complexes have either octahedral, distorted octahedral, polymeric octahedral or tetrahedral structures.     

A novel carbocatalytic hydride transfer strategy for efficient reduction of structurally different aldehydes and ketones in water

Reduced graphene oxide (rGO)–NaBH₄ is reported as mild and efficient catalyst-system for chemo-/regioselective reduction of structurally different aliphatic, aromatic as well as α,β-unsaturated aldehydes and ketones in water. The rGO was prepared by reducing graphene oxide using Tulsi leaf extract as bio-reductant. Operational simplicity, ambient reaction condition, high yield of pure products (80–97%), no by-product formation, no use of column chromatography for purification are the salient features of the envisaged protocol. Furthermore, the recovered TRGO was recycled and reused for subsequent reductions up to five times without any loss in activity.     

Multiplexing fibre optic near infrared (NIR) spectroscopy as an emerging technology to monitor industrial bioprocesses

The application of near infrared spectroscopy in bioprocessing has been limited by its dependence on calibrations derived from single bioreactor at a given time. Here, we propose a multiplexed calibration technique which allows calibrations to be built from multiple bioreactors run in parallel. This gives the flexibility to monitor multiple vessels and facilitates calibration model transfer between bioreactors. Models have been developed for the two key analytes: glucose and lactate using Chinese hamster ovary (CHO) cell lines and using analyte specific information obtained from the feasibility studies. We observe slight model degradation for the multiplexed models in comparison to the conventional (single probe) models, decrease in r² values from 89.4% to 88% for glucose whereas for lactate from 92% to 91.8% and a simultaneous increase in the number of factors as the model incorporates the inter-probe variability, nevertheless the models were fit for purpose. The results of this particular application of implementing multiplexed-NIRS to monitor multiple bioreactor vessels are very encouraging, as successful models have been built on-line and validated externally, which proffers the prospect of reducing timelines in monitoring the vessels considerably, and in turn, providing improved control.     

WKB and MAF quantization rules for spatially confined quantum mechanical systems

A formalism is developed to obtain the energy eigenvalues of spatially confined quantum mechanical systems in the framework of the usual Wentzel–Kramers–Brillouin (WKB) and modified airy function (MAF) methods. To illustrate the working rule, the techniques are applied to three different cases, viz. the confined one‐dimensional harmonic and quartic oscillators and a boxed‐in charged particle subject to an external electric field. The energies thus obtained are compared with those from shifted 1/N expansion, variational, and other methods, as well as the available exact numerical results. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 73: 497–504, 1999