On the dispersion of a solute in oscillating flow of a non-Newtonian fluid in a channel

The paper presents an exact analysis of the dispersion of an immiscible solute in a non-Newtonian fluid (known as an incompressible second-order fluid which shows viscoelastic behaviour) flowing slowly in a parallel plate channel in the presence of a periodic pressure gradient. Using a generalized dispersion model which is valid for all times after the solute injection, the diffusion coefficients K _i (τ)(i=1,2,3,…) are obtained as functions of time τ in the case when the initial solute distribution is in the form of a slug of finite extent. The analysis leads to the novel result that K ₂(τ) (which is a measure of the longitudinal dispersion coefficient of the solute) has a steady part S in addition to a fluctuating part D ₂(τ) due to the pulsatility of the flow. It is found that S decreases with increase in the viscoelastic parameter M for given values of the amplitude λ and frequency ω of the pressure pulsation. On the other hand, it is found that at a fixed instant τ, the amplitude of D ₂(τ) increases with increase in M for given values of λ and ω. Further it is shown that at a given instant τ, the amplitude of D ₂(τ) decreases with increase in ω for given λ and M and the profile for D ₂(τ) becomes progressively flatter with increase in ω. Finally the axial distribution of the average concentration θ _m of the solute over the channel cross-section is determined at different instants after the solute injection for several values of M, λ and ω. The present study is likely to have important bearing on the problem of dispersion of tracers in blood flow through arteries.     

Enantiomeric synthesis of the key synthon of the oviposition-deterring pheromone of Rhagoletis cerasi L

A convenient and enantioselective synthesis of ethyl (8RS, 15R)-8-acetoxy-15-hydroxyhexadecanoate15 via a chemoenzymatic approach has been described. The salient features of the synthesis were operational simplicity, use of easily accessible materials, and excellent enantiocontrol via lipase catalyzed acetylation of 2-alkanol.     

Simultaneous Pseudo-Timestepping for PDE-Model Based Optimization Problems

In this paper we present a new method for the solution of optimization problems with PDE constraints. It is based on simultaneous pseudo-time stepping for evolution equations. The new method can be viewed as a continuous reduced SQP method in the sense that it uses a preconditioner derived from that method. The reduced Hessian in the preconditioner is approximated by a pseudo-differential operator, whose symbol can be investigated analytically. We apply our method to a boundary control model problem. The new optimization method needs 3.2-times the overall computational effort of the solution of simulation problem alone.     

Kinetics and mechanism of the oxidation of acetaldehyde by chromic acid in perchloric acid

Summary The oxidation of MeCHO by chromium(VI) has been studied in HClO₄ medium over a wide range of experimental conditions and has been found to obey the rate law;v=k[MeCHO][HCrO ₄ ^– ][H⁺]. The calculated H and-S values for the reaction are 30±2kJ mol^–1 and 171±7J mol^–1deg^–1, respectively. The mechanism is discussed in terms of carbon-hydrogen bond cleavage.     

Characterization of some essential oils and their key components: Thermoanalytical techniques

The present study was aimed at determining the kinetics of evaporation and establishing vapor pressure curves for both single and multi-component systems by thermogravimetry (TG) and differential scanning calorimetry (DSC). Essential oils (e.g. lavender oil, orange oil, clove oil and eucalyptus oil, etc.) are typically multi-component systems consisting of various volatile pure components (e.g. linalyl acetate, limonene, cinnamaldehyde, etc.) which resemble single component systems. In this study linalyl acetate was taken as the calibration compound for TG. The vapor pressure curves for the pure substances were plotted using TG and vapor pressure plots for clove oil and eucalyptus oil were constructed using DSC. The thermodynamic and kinetic parameters of the pure compounds were compared to that of the multi-component systems to quantitatively and qualitatively measure the influence of different compounds on each other. The k-value from the vapor pressure data for linalyl acetate was calculated as 112006 Pa kg^0.5mol^0.5s^-1 m^-2 K^-0.5. The vapor pressure values were used to determine the Antoine constants using the SPSS 10.0 software.This revised version was published online in November 2005 with corrections to the Cover Date.     

Biyclo[2.2.1]heptane as cyclopentane precursor. Part 4 Stereocontrolled syhthesis of a potential intermediate to chromophycane dolastane and clavularane

The regio– and stereoselective synthesis of the keto-esters 20 and 22 are described, the latter being a potential intermediate to several diterpenes. The key steps involve the Diels-Alder cycloaddition between the benzocycloheptenone 5 and cyclopentadiene followed by a regioselective functionalisation of the adduct 6. A remarkable reversal of regioselectivity was observed during oxymercuration of the unsymmetric double bond in 6 and its reduced product 11 leading to 8 and 12 which were subsequently transformed to 20 and 22 respectively.     

A new route to obtain shape-controlled gold nanoparticles from Au(III)-beta-diketonates

Ligands with a beta-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes from aqueous HAuCl(4) solution. Evolution of stable gold nanoparticles follows first order (k approximately equal to 10(-2) min(-1)) kinetics with respect to Au(0) concentration. Growth of particles of different shapes (spherical or triangular or hexagonal) goes hand in hand under the influence of different beta-diketones, which have excellent capping and reducing properties. Chlorine insertion was observed to take place in the beta-diketone skeleton.     

Conformational effects on vibronic spectra and excited state dynamics of 3-fluorobenzoic acid dimer

Two conformational isomers of 3-fluorobenzoic acid dimer (3-FBA(2)) have been identified in a supersonic jet expansion by use of laser-induced fluorescence excitation (FE), UV-UV hole-burning, and dispersed fluorescence (DF) spectroscopic methods. In the FE spectrum, the S(1) origins of the two isomeric species appear at a frequency gap of only 24 cm(-1), and the vibronic intensities of the redshifted dimer (dimer I) are about two times weaker than those of dimer II. However, ab initio quantum chemistry calculations at the MP2/6-31G(**) level of theory predict that all the isomeric species of 3-FBA(2) have almost the same binding energy (approximately 17 kcal/mol) in the ground state. Furthermore, unlike benzoic acid dimer, the present system shows intense activity for a low-frequency mode in both the FE and DF spectra. With the aid of DFT (B3LYP/6-311G(**)) predicted normal mode frequencies, we have assigned the mode to the in-plane gear (cogwheel) vibration of the cyclic hydrogen-bonded frame of the dimer. The Franck-Condon profiles for vibronic excitation of the mode indicate that the distortion of the cyclic hydrogen bond frame as a result of S(1)<--S(0) excitation is larger for dimer I than dimer II. Moreover, the fluorescence lifetime at the S(1) zero-point level of the former is also significantly smaller than the latter. Using the predictions of configuration interaction singles calculations, we have proposed that the spectral and dynamical differences between the two isomeric species observed in this study are manifestations of the different characteristics of their S(1) surfaces. By measuring FE, DF, and hole-burning spectra of a mixed dimer between 3-fluobenzoic acid and benzoic acid we have shown that the isomeric features in the homodimer spectra are due to two locally excited rotamers of the 3-fluorobenzoic acid moiety.     

Convenient route to enantiopure aryl cyclopentanes via Diels-Alder reaction of asymmetric dienes. Total synthesis of (+)-herbertene and (+)-cuparene

A general route for the synthesis of highly substituted aryl cyclopentanes has been developed involving Diels-Alder reaction of asymmetric dienes prepared from (+)-camphoric acid followed by aromatization of the resulting cyclohexene derivatives. Employing this protocol enantiospecific synthesis of (+)-herbertene and (+)-cuparene has been accomplished.