Novel Synthesis of N‐Methyl Spiropyrrolidines by 1,3‐Dipolar Cycloaddition Reaction of Azomethine Ylides

A series of novel N‐methyl spiropyrrolidines have been synthesized in good yield by the cycloaddition reaction of azomethine ylides generated by a decarboxylative route from sarcosine and paraformaldehyde with conformationally locked s‐trans enone functionality present in the (E)‐3‐arylidene‐4‐chromanone as dipolarophiles. The structure of the title compound was established by spectroscopic techniques.     

Rapid identification and quantification of chlorpheniramine maleate or pheniramine maleate in pharmaceutical preparations by thin-layer chromatography-densitometry

Thin-layer chromatography (TLC)-densitometry was used to separate, identify, and quantitate chlorpheniramine maleate (CPM) and pheniramine maleate (PM) when present in combination with other drugs in pharmaceutical preparations of tablets, syrups, eye and ear drops, etc. CPM or PM was extracted (tablets, capsules, etc.) or diluted (liquid preparations, if needed) with 80% ethanol and isolated from other ingredients by TLC on silica gel G using cyclohexane-chloroform-methanol-diethylamine (4.5 + 4.0 + 0.5 + 1.0, v/v) as the mobile phase. Separated CPM and PM were detected under shortwave ultraviolet light and quantitated by scanning densitometry at 260 nm. Recoveries of CPM and PM were 100.09+/-0.77% and 100.09+/-0.87%, respectively.     

Self-injection length in La0.7Ca0.3MnO3-YBa2Cu3O7-δ ferromagnet-superconductor multilayer thin films

We have carried out extensive studies on the self-injection problem in barrierless heterojunctions between La_0.7Ca_0.3MnO₃ (LCMO) and YBa₂Cu₃O_7-δ (YBCO) thin films. The heterojunctions were formed in situ by sequentially growing LCMO and YBCO films on 〈100〉 LaAlO₃ (LAO) substrate using a pulsed laser deposition (PLD) system. YBCO micro-bridges with 64 μm width were patterned both on the LAO (control) and LCMO side of the substrate. Critical current, I _c, was measured at 77 K on both the control side as well as the LCMO side for different YBCO film thickness. It was observed that while the control side showed a J _c of ∼ 2 × 10⁶ A/cm², the LCMO side showed about half the value for the same thickness (1800 ?). The difference in J _c indicates that a certain thickness of YBCO has become ‘effectively’ normal due to self-injection. From the measurement of J _c at two different thicknesses (1800 ? and 1500 ?) of YBCO films both on the LAO as well as the LCMO side, the value of self-injection length (at 77 K) was estimated to be ∼ 900 ?. To the authors’ best knowledge, this is the first time that self-injection length has been quantified. A control experiment carried out with LaNiO₃ deposited by PLD on YBCO did not show any evidence of self-injection.     

Study of magnetoresistance and conductance of bicrystal grain boundary in La0.67Ba0.33MnO3 thin film

La_0.67Ba_0.33MnO₃ (LBMO) thin film is deposited on a 36.7°C SrTiO₃ bicrystal substrate using laser ablation technique. A microbridge is created across bicrystal grain boundary and its characteristics are compared with a microbridge on the LBMO film having no grain boundary. Presence of grain boundary exhibits substantial magnetoresistance ratio (MRR) in the low field and low temperature region. Bicrystal grain boundary contribution in MRR disappears at temperature T>175 K. At low temperature, I-V characteristic of the microbridge across bicrystal grain boundary is nonlinear. Analysis of temperature dependence of dynamic conductance-voltage characteristics of the bicrystal grain boundary indicates that at low temperatures (T<175 K) carrier transport across the grain boundary in LBMO film is dominated by inelastic tunneling via pairs of manganese atoms and tunneling through disordered oxides. At higher temperatures (T>175 K), magnetic scattering process is dominating. Decrease of bicrystal grain boundary contribution in magnetoresistance with the increase in temperature is due to enhanced spin-flip scattering process.     

Molar extinction coefficients of some carbohydrates in aqueous solutions

Molar extinction coefficients of some carbohydrates viz. l-arabinose (C₅H₁₀O₅), d-glucose (C₆H₁₂O₆), d-mannose (C₆H₁₂O₆), d-galactose (C₆H₁₂O₆), d(-) fructose (C₆H₁₂O₆) and maltose (C₁₂H₂₄O₁₂) in aqueous solutions have been determined at 81, 356, 511, 662, 1173 and 1332 keV by gamma ray transmission method in a narrow beam good geometry set-up. These coefficients have been found to depend upon the photon energy following a 4-parameter polynomial. These extinction coefficients for different sugars having the same molecular formula have same values varying within experimental uncertainty. Within concentration ranges studied, Beer-Lambert law is obeyed very well.     

Kinetics and mechanism of oxidation of N,α-diphenylnitrones by 4-(dimethylamino)pyridinium chlorochromate (DMAPCC) in aqueous DMF medium

The kinetics of oxidation of aldonitrones by 4-(dimethylamino)pyridinium chlorochromate (DMAPCC) has been studied in aqueous N,N-dimethylformamide in the presence of perchloric acid. The reaction follows first-order kinetics with respect to each of DMAPCC and nitrone. The order with respect to [H⁺] was found to be close to zero. The rate of oxidation was unaltered by the variation of [NaClO₄] but addition of MnSO₄ decreased the rate. The reaction rate was found to decrease with a decrease in dielectric constant of the medium. Electron-releasing and electron-withdrawing groups perturb the reaction rate with a good Hammett correlation. The oxidation products were found to be benzaldehyde and nitrosobenzene. The reaction was carried out at four different temperatures and the activation parameters have been calculated. On the basis of the experimental findings, a suitable mechanism has been proposed.     

Crystal structure and DFT analyses of a pentacoordinated PCP pincer nickel(II) complex

The reaction of NiCl₂ with 1,3‐bis[(diphenylphosphanyl)methyl]hexahydropyrimidine in the presence of 2,6‐dimethylphenyl isocyanide and KPF₆ afforded a new pentacoordinated PCP pincer Ni^II complex, namely {1,3‐bis[(diphenylphosphanyl)methyl]hexahydropyrimidin‐2‐yl‐κN²}(2,6‐dimethylphenyl isocyanide‐κC)nickel(II) hexafluoridophosphate 0.70‐hydrate, [Ni(C₉H₉N)(C₃₀H₃₀ClN₂P₂)]PF₆·0.7H₂O or [NiCl{C(NCH₂PPh₂)₂(CH₂)₃‐κ³P,C,P′}(Xylyl‐NC)]PF₆·0.7H₂O, in very good yield. Its X‐ray structure showed a distorted square‐pyramidal geometry and the compound does not undergo dissociation in solution, as shown by variable‐temperature NMR and UV–Vis studies. Density functional theory (DFT) calculations provided an insight into the bonding; the nickel dsp²‐hybridized orbitals form the basal plane and the nearly pure p orbital forms the axial bond. This is consistent with the NBO (natural bond orbital) analysis of analogous nickel(II) complexes.     

Synthesis of trans-Disubstituted Alkenes by Cobalt-Catalyzed Reductive Coupling of Terminal Alkynes with Activated Alkenes

A cobalt-catalyzed reductive coupling of terminal alkynes, RC?CH, with activated alkenes, R'CH?CH(2) , in the presence of zinc and water to give functionalized trans-disubstituted alkenes, RCH?CHCH(2) CH(2) R', is described. A variety of aromatic terminal alkynes underwent reductive coupling with activated alkenes including enones, acrylates, acrylonitrile, and vinyl sulfones in the presence of a CoCl(2) /P(OMe)(3) /Zn catalyst system to afford 1,2-trans-disubstituted alkenes with high regio- and stereoselectivity. Similarly, aliphatic terminal alkynes also efficiently participated in the coupling reaction with acrylates, enones, and vinyl sulfone, in the presence of the CoCl(2) /P(OPh)(3) /Zn system providing a mixture of 1,2-trans- and 1,1-disubstituted functionalized terminal alkene products in high yields. The scope of the reaction was also extended by the coupling of 1,3-enynes and acetylene gas with alkenes. Furthermore, a phosphine-free cobalt-catalyzed reductive coupling of terminal alkynes with enones, affording 1,2-trans-disubstituted alkenes as the major products in a high regioisomeric ratio, is demonstrated. In the reactions, less expensive and air-stable cobalt complexes, a mild reducing agent (Zn) and a simple hydrogen source (water) were used. A possible reaction mechanism involving a cobaltacyclopentene as the key intermediate is proposed.