Stabilization of foams with inorganic colloidal particles

Wet foams are used in many important technologies either as end or intermediate products. However, the thermodynamic instability of wet foams leads to undesired bubble coarsening over time. Foam stability can be drastically improved by using particles instead of surfactants as foam stabilizers, since particles tend to adsorb irreversibly at the air-water interface. Recently, we presented a novel method for the preparation of high-volume particle-stabilized foams which show neither bubble growth nor drainage over more than 4 days. The method is based on the in-situ hydrophobization of initially hydrophilic particles to enable their adsorption on the surface of air bubbles. In-situ hydrophobization is accomplished through the adsorption of short-chain amphiphiles on the particle surface. In this work, we illustrate how this novel method can be applied to particles with various surface chemistries. For that purpose, the functional group of the amphiphilic molecule was tailored according to the surface chemistry of the particles to be used as foam stabilizers. Short-chain carboxylic acids, alkyl gallates, and alkylamines were shown to be appropriate amphiphiles to in-situ hydrophobize the surface of different inorganic particles. Ultrastable wet foams of various chemical compositions were prepared using these amphiphiles. The simplicity and versatility of this approach is expected to aid the formulation of stable wet foams for a variety of applications in materials manufacturing, food, cosmetics, and oil recovery, among others.     

Phenolic compounds,essential oil composition,and antioxidant activity of Angelica purpurascens (Avé-Lall.) Gill

In this study, methanol extracts (MEs) and essential oil (EO) of Angelica purpurascens (Avé-Lall.) Gill obtained from different parts (root, stem, leaf, and seed) were evaluated in terms of antioxidant activity, total phenolics, compositions of phenolic compound, and essential oil with the methods of 2,2-azino-bis(3ethylbenzo-thiazoline-6-sulfonic acid (ABTS•⁺), 2,2-diphenyl-1-picrylhydrazil (DPPH•) radical scavenging activities, and ferric reducing/antioxidant power (FRAP), the Folin–Ciocalteu, liquid chromatography−tandem mass spectrometry (LC−MS/MS), and gas chromatography-mass spectrometry (GC−MS), respectively. The root extract of A. purpurascens exhibited the highest ABTS•⁺, DPPH•, and FRAP activities (IC₅₀: 0.05 ± 0.0001 mg/mL, IC₅₀: 0.06 ± 0.002 mg/mL, 821.04 ± 15.96 µM TEAC (Trolox equivalent antioxidant capacity), respectively). Moreover, EO of A. purpurascens root displayed DPPH• scavenging activity (IC₅₀: 2.95 ± 0.084 mg/mL). The root extract had the highest total phenolic content (438.75 ± 16.39 GAE (gallic acid equivalent), µg/mL)). Twenty compounds were identified by LC−MS/MS. The most abundant phenolics were ferulic acid (244.39 ± 15.64 μg/g extract), benzoic acid (138.18 ± 8.84 μg/g extract), oleuropein (78.04 ± 4.99 μg/g extract), and rutin (31.21 ± 2.00 μg/g extract) in seed, stem, root, and leaf extracts, respectively. According to the GC−MS analysis, the major components were determined as α-bisabolol (22.93%), cubebol (14.39%), α-pinene (11.63%), and α-limonene (9.41%) among 29 compounds. Consequently, the MEs and EO of A. purpurascens can be used as a natural antioxidant source.     

Colloidal stabilization of nanoparticles in concentrated suspensions

The stabilization of nanoparticles in concentrated aqueous suspensions is required in many manufacturing technologies and industrial products. Nanoparticles are commonly stabilized through the adsorption of a dispersant layer around the particle surface. The formation of a dispersant layer (adlayer) of appropriate thickness is crucial for the stabilization of suspensions containing high nanoparticle concentrations. Thick adlayers result in an excessive excluded volume around the particles, whereas thin adlayers lead to particle agglomeration. Both effects reduce the maximum concentration of nanoparticles in the suspension. However, conventional dispersants do not allow for a systematic control of the adlayer thickness on the particle surface. In this study, we synthesized dispersants with a molecular architecture that enables better control over the particle adlayer thickness. By tailoring the chemistry and length of these novel dispersants, we were able to prepare fluid suspensions (viscosity < 1 Pa.s at 100 s-1) with more than 40 vol % of 65-nm alumina particles in water, as opposed to the 30 vol % achieved with a state-of-the-art dispersing agent. This remarkably high concentration facilitates the fabrication of a wide range of products and intermediates in materials technology, cosmetics, pharmacy, and in all other areas where concentrated nanoparticle suspensions are required. On the basis of the proposed molecular architecture, one can also envisage other similar molecules that could be successfully applied for the functionalization of surfaces for biosensing, chromatography, medical imaging, drug delivery, and aqueous lubrication, among others.     

The impact of the natural sciences on archaeology

This article reviews some of the applications of physics to the solution of archaeological problems. The use of magnetic, resistivity and electromagnetic surveying techniques for the location of buried features is described. Various methods of age determination are outlined while the problems associated with radiocarbon dating of organic material and thermoluminescent dating of pottery are discussed in detail. The techniques, including petrological examination, chemical analysis and isotopic analysis, employed in the physical examination of archaeological artefacts are described. Examples of the application of these techniques in establishing the source of the raw materials used in pottery, metal and stone implements and in elucidating the techniques of manufacture of pottery and metal objects are also given.     

Transition Metal Ion-binding Properties of a 14-Membered N2O2S2- Macrobicyclic Ligand

The selective liquid–liquid extraction of various transition metal cations from the aqueous phase to the organic phase was carried out using a 14-membered N₂O₂S₂-macrobicycle. Metal picrates such as Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺,Cu²⁺ and Cd²⁺ were used in this extraction studies. It was found that the ligand showed moderate selectivity towards Pb²⁺ only among the other metals. The extraction constant (log K _ex) was determined to be 13.8 for Pb²⁺ complex.     

Influence of stoichiometry on the luminescent properties of InAs quantum dots grown on a heterostructure

We report photoluminescence (PL) spectra of InP/In_xGa_1-xAs/InAs/InP dot-in-a-well structures grown by MOVPE, with different compositions of the ternary layer. Measurements with atomic force microscopy showed that the largest quantum dot (QD) height is obtained when the InAs QDs are grown on the In_xGa_1-xAs layer with a mismatch of 1000 ppm, and the height decreases as the mismatch departs from this value. PL spectra of the QDs showed an asymmetric band, which involves transitions between dot energy levels and can be deconvoluted into two peaks. The highest energy PL peak of this band was observed for the sample with the QDs grown on top of the lattice-matched In_xGa_1-xAs layer and it shifted to lower energies for strained samples as the degree of mismatch increased. Theoretical calculations of the energy levels of the entire structure were used to interpret the obtained PL spectra and determine the possible detection tunability range.     

Hierarchical porous materials made by drying complex suspensions

Porous structures containing pores at different length scales are often encountered in nature and are important in many applications. While several processing routes have been demonstrated to create such hierarchical porous materials, most methods either require chemical gelation reactions or do not allow for the desired control of pore sizes over multiple length scales. We describe a versatile and simple approach to produce tailor-made hierarchical porous materials that relies solely on the process of drying. Our results show that simple drying of a complex suspension can lead to the self-assembly of droplets, colloidal particles and molecular species into unique 3D hierarchical porous structures. Using a microfluidic device to produce monodisperse templating droplets of tunable size, we prepared materials with up to three levels of hierarchy exhibiting monodisperse pores ranging from 10 nm to 800 μm. While the size of macropores obtained after drying is determined by the size of initial droplets, the interconnectivity between macropores is strongly affected by the type of droplet stabilizer (surfactants or particles). This simple route can be used to prepare porous materials of many chemical compositions and has great potential for creating artificial porous structures that capture some of the exquisite hierarchical features of porous biological materials.