Mode selective directional couplers for overmoded waveguide systems

Two types of directional couplers for transverse electric (TE) modes are described: short and multihole couplers, respectively. They selectively pick one mode out of a mode mixture in an overmoded circular waveguide system. Unwanted modes are either statistically kept at low level or are suppressed by destructive interference in the coupling waveguide. Mode selectivity and directivity in multihole couplers oscillate up and down with an increasing number of holes, finally reaching a minimum of approximately 20 dB, unless there are competing modes with rational fractions of the beat wavelength. A multihole coupler for the TE₀₂ mode (28 GHz, 63.4 mm waveguide diameter, 41 holes) and a length of 1.6 m shows a calculated directivity of 68 dB and suppresses the unwanted modes TE₀₁ with 34 dB (24 dB), TE₂₂ with 37 dB (45 dB), and further modes TE_m (<5, m<6) with 17 dB to 34 dB in forward direction (figures in parentheses are for unwanted modes propagating in backward direction).A short directional coupler for the TE₀₁ mode (28 GHz, 63.4 mm waveguide diameter) with 16 holes and a length of 230 mm shows a directivity of 55 to 100 dB between 27.9 and 28.1 GHz, suppressing the TE₀₂ mode with 35 to 80 dB, the TE₀₃ mode with 30 to 65 dB, and the TE₂₂ mode with 30 to 70 dB.     

A Simplified Method for the Measurement of Insoluble Solids in Pretreated Biomass Slurries

The biochemical conversion of cellulosic biomass to liquid transportation fuels includes the breakdown of biomass into its soluble, fermentable components. Pretreatment, the initial step in the conversion process, results in heterogeneous slurry comprised of both soluble and insoluble biomass components. For the purpose of tracking the progress of the conversion process, it is important to be able to accurately measure the fraction of insoluble biomass solids in the slurry. The current standard method involves separating the solids from the free liquor and then repeatedly washing the solids to remove the soluble fraction, a laborious and tedious process susceptible to operator variations. In this paper, we propose an alternative method for calculating the fraction of insoluble solids which does not require a washing step. The proposed method involves measuring the dry matter content of the whole slurry as well as the dry matter content in the isolated liquor fraction. We compared the two methods using three different pretreated biomass slurry samples and two oven-drying techniques for determining dry matter content, an important measurement for both methods. We also evaluated a large set of fraction insoluble solids data collected from previously analyzed pretreated samples. The proposed new method provided statistically equivalent results to the standard washing method when an infrared balance was used for determining dry matter content in the controlled measurement experiment. Similarly, in the large historical data set, there was no statistical difference shown between the wash and no-wash methods. The new method is offered as an alternative method for determining the fraction of insoluble solids.     

Improved directional couplers for overmoded waveguide systems

The performance of multihole directional couplers can be considerably improved by placing a second hole structure to the existing one. The improvement may be aimed at directivity or at suppression of certain unwanted modes propagating either in forward or backward direction.     

Copper and iron interactions with angiotensin-converting enzyme inhibitors. A study by fast-atom bombardment tandem mass spectrometry

Fast atom bombardment, combined with high-energy collision-induced tandem mass spectrometry, has been used to investigate gas-phase metal-ion interactions with captopril, enalaprilat and lisinopril, all angiotensin-converting enzyme inhibitors.Suggestions for the location of metal-binding sites are presented. For captopril, metal binding occurs most likely at both the sulphur and the nitrogen atom. For enalaprilat and lisinopril, binding preferably occurs at the amine nitrogen. Copyright 1999 John Wiley & Sons, Ltd.     

Light scattering and dielectric relaxation studies of glass forming liquids

Extended Abstract: Glass forming organic liquids and polymers exhibit long range density fluctuations with correlation length ξ in the range of 10–300 nm at temperatures above T_g (1 - 6). This follows from dynamic and static light scattering experiments revealing some unexpected features, which cannot be explained on the basis of conventional liquid state theories: (i) In static light scattering the intensity I(q → 0) is no longer proportional to the isothermal compressibility, (ii) This excess scattering I_exc shows a strong q-dependence (q = (4π/Λ.)sin(θ/2)) corresponding to a correlation length ξ in the above mentioned range, (iii) The Landau-Placzek ratio I_Rayleigh/2I_Brillouin is much too high compared with the results of light scattering theories, (iv) In photon correlation spectroscopy a new ultraslow hydrodynamic mode (Γ ˜ q²) is detected with relaxation rates Γ about 10⁻⁶ to 10⁻⁹ lower than those of the α-process at a given temperature. In order to explain these observations, a two-state fluid model is proposed, which starts from the coexistence of “liquid-like” and “aperiodic solid-like” regions within the liquids. Such ideas have been discussed many times before, so for example A.R. Ubbelohde (7) speculates about “anticrystalline” clusters in liquids. Molecular dynamics simulations of atomic liquids showed that long range orientational fluctuations appear upon supercooling (8). A preferred icosahedral ordering is observed (9) and the number of icosahedral clusters increases with decreasing temperature (10). In connection with the interpretation of the dynamics of supercooled liquids different “two-state” models have been proposed (11 - 15). For the explanation of the light scattering results we propose that the molecules in the different dynamic states (“liquid” or “solid”) aggregate during annealing of the liquid at temperatures above T_g. Experiments showed that the equilibration times can be rather long (3 - 5), but nevertheless the liquids exhibiting long range density fluctuations are in the state of lowest free energy. We claim that our observations are the first experimental proof of the existence of such different dynamic states, which have been discussed many times before. The extended secondary clusters can also be detected by ultra small angle X-ray scattering.     

A miniaturized and integrated gel post platform for multiparameter PCR detection of herpes simplex viruses from raw genital swabs

Herpes simplex virus (HSV) is one of the most prevalent viruses, with acute and recurrent infections in humans. The current gold standard for the diagnosis of HSV is viral culture which takes 2-14 days and has low sensitivity. In contrast, DNA amplification by polymerase chain reaction (PCR) can be performed within 1-2 h. We here describe a multiparameter PCR assay to simultaneously detect HSV-1 and HSV-2 DNA templates, together with integrated positive and negative controls, with product detection by melting curve analysis (MCA), in an array of semi-solid polyacrylamide gel posts. Each gel post is 0.67 μL in volume, and polymerized with all the components required for PCR. Both PCR and MCA can currently be performed in one hour and 20 min. Unprocessed genital swabs collected in universal transport medium were directly added to the reagents before or after polymerization, diffusing from atop the gel posts. The gel post platform detects HSV templates in as little as 2.5 nL of raw sample. In this study, 45 genital swab specimens were tested blindly as a preliminary validation of this platform. The concordance of PCR on gel posts with conventional PCR was 91%. The primer sequestration method introduced here (wherein different primers are placed in different sets of posts) enables the simultaneous detection of multiple pathogens for the same sample, together with positive and negative controls, on a single chip. This platform accepts unprocessed samples and is readily adaptable to detection of multiple different pathogens or biomarkers for point-of-care diagnostics.