Electron and light microscopical investigation of defect structures in mesophases of pharmaceutical substances

 Transmission electron microscopy of freeze fractured and replicated samples (TEM) and polarizing light microscopy (PLM) are used to investigate the defect structures of the thermotropic and lyotropic mesophases of the non-steroidal antiinflammatory drug fenoprofen sodium and of the thermotropic mesophase of the nonionic surfactant sucrose oleate (O1570). All mesophases have a layered, smectic structure. The thermotropic liquid crystal of feno-profen sodium is an interdigitated smectic A phase (smectic Ad) having the highest viscosity of the investigated samples. The thermotropic mesophase of the sugar ester is also of the type smectic A, likely to be of subtype smectic A2 (bilayered smectic structure). The lyotropic mesophase is of lamellar liquid crystalline nature and has a much lower viscosity than the thermotropic mesophases. In the PLM the lyotropic fenoprofen mesophase has a strong tendency to form a pseudoisotropic texture, indicating a strong tendency to form undisturbed layered structures. Other textures exhibited in the PLM are fan-shaped texture and maltese-cross texture. Confocal domains, cylinders, pits and peaks as well as screw dislocations are found in great number in the TEM. However, no greater regions of undisturbed lamellar arrangement in the lyotropic mesophase could be detected. The only texture of the thermotropic fenoprofen mesophase visible in the PLM is the fan-shaped texture, indicating confocal domains as predominant structural elements. However, no confocal domains (tori or Dupin cyclides) are found in the TEM. In the PLM the sugar–ester mesophase exhibited a fan-shaped texture, maltese crosses and oily streaks as dominant textures. In the TEM only a few +π and −π disclinations and imperfect confocal domains could be detected. The discrepancies in the appearance of defect structures and textures between the mesophases as well as the discrepancies in the findings in the PLM and in the TEM investigations are caused by the different sample preparation and the different viscosities of the mesophases. Received: 28 May 1997 Accepted: 2 September 1997     

Phase separation of Lal3 inside single-walled carbon nanotubes.

Simple binary solids can be found to adopt unprecedented structures when confined into nanometre-sized cavities, such as the inner cylindrical bore of single-walled carbon nanotubes (SWNT). In the case of the discussed Lal(x)@SWNT encapsulation composite, the Lal2 "crystal" fragment adopts the structure of bulk Lal3, with one third of the iodine positions unoccupied. A complete characterisation of the encapsulation composite was achieved using an enhanced digital restoration approach of high-resolution transmission electron microscopy (HRTEM) images. The resulting complex exit surface wave provides information about the precise structural data of both filling material and host SWNT, establishing the SWNT's chirality and thus enabling a prediction of the composite's overall electron-transport properties.     

UV assisted photo reactive polyether-polyesteramide resin for future applications in 3D printing

Among additive manufacturing, photocuring 3D printing technologies are very relevant because of its high printing speed and high precision. However, the limited performance of photosensitive thermoset polymers is the bottleneck for the application of photocuring 3D printing in some fields, particularly in the biomedical sector. Thus, the development of biodegradable and biocompatible materials is highly desirable and of utmost importance. In this work, a biodegradable and non-cytotoxic thermoset polymer for photocuring 3D printing is reported. It consists of an unsaturated polyesteramide bearing phenylalanine, 2-butene-1,4-diol and fumarate building blocks, which is photocured under UV irradiation using a low molecular weight poly(ethylene glycol) diacrylate as crosslinker. The main characteristics of the new thermoset are: (1) very high volumetric and mechanical integrity stabilities, comparable to that of photocured epoxides; (2) very high degradation temperature; (3) very low water absorption capacity; (4) relatively fast enzymatic degradation, reaching 16.5% after 3 months; and (5) non-cytotoxic response in presence of epithelial cells, even when soluble molecular fragments coming from biodegradation are considered. These properties favor the future utilization of the new polyether-polyesteramide resin in the manufacturing of more sustainable products via 3D printing methods, such as stereolithography, that uses UV sources.     

Characterisation of colloidal drug delivery systems from the naked eye to Cryo-FESEM

Poly(ethylcyanoacrylate) nanoparticles prepared by interfacial polymerisation on the basis of microemulsions were prepared in this study and both colloidal systems, nanoparticles and microemulsions, were analysed by visual observation and several microscopic techniques. Phase boundaries for the microemulsions of the two pseudoternary systems ethyloleate, polyoxyethylene 20 sorbitan mono-oleate/sorbitan monolaurate and water with and without butanol as a cosurfactant were determined by visual observation of the samples. Microemulsions containing liquid crystals were determined by polarisation light microscopy. Using freeze-fracture transmission electron microscopy and Cryo-field emission scanning electron microscopy the type of microemulsion (w/o droplet, bicontinuous, solution) was characterised. Nanoparticles prepared from the different types of microemulsion were additionally observed by conventional scanning electron microscopy. The size of the nanoparticles obtained from electron microscopy was in good agreement with particle sizing techniques (photon correlation spectroscopy) from earlier studies and no morphological differences could be observed in particles prepared from the different types of microemulsions. Cryo-field emission scanning electron microscopy proved to be a most valuable technique in the visualisation of the colloidal systems as samples could be observed close to their natural state.     

A polarographic study of propene-maleic anhydride copolymers

The polarographic behaviour of hydrolyzed propene-maleic anhydride copolymers in the interval pH 2.0–11.0 has been investigated by differential pulse polarography in aqueous lithium chloride solution at 25°C. In dependence on the pH-value, one, two or three signals, belonging to the acid groups in the copolymer, appear in the polarograms. Three apparent polarographic acid constants have been determined graphically from the changes in the half-wave potential of the separate peaks in correlation with pH.     

Analysis of 3-chlorotyrosine as a specific marker of protein oxidation: the use of N(O,S)-ethoxycarbonyltrifluoroethyl ester derivatives and gas chromatography/mass spectrometry

N(O,S)-ethoxycarbonyltrifluoroethyl amino acid esters are formed by the reaction of amino acids with ethylchloroformate plus trifluoroethanol plus pyridine. The use of these derivatives for a rapid and sensitive determination of 3-chlorotyrosine, a highly specific marker of myeloperoxidase-catalyzed protein oxidation, by using standard gas chromatography/electron impact mass spectrometry, is discussed.     

Effect of intra- and extra-liposomal distribution of sodium chloride on the stability of large unilamellar vesicles

Three groups of 1,2-dipalmitoyl-rac-glycero-3-phosphocholine (DPPC) large unilamellar vesicle (LUV) dispersions were studied: LUV (A) dispersions with only extraliposomal sodium chloride (NaCl), LUV (B) dispersions with intra- and extraliposomal NaCl, and LUV (C) dispersions with only intraliposomal NaCl. The NaCl concentrations ranged from 0 to 150 mM. An abrupt increase in leakage was observed around -10 degree C for all the three groups of LUV, which coincided with the temperature of extraliposomal ice formation. Within the three groups, leakage of LUV (C) was significantly higher than the other groups. Extraliposomal ice formation and the resulting freeze-concentration of LUV may be the major cause of the leakage. Intraliposomal ice formation observed at -43 degree C seemed to stop leakage of LUV when LUV were frozen below -43 degree C. An exotherm of eutectic crystallization of NaCl was occasionally observed at -37 degree C, with a higher probability of formation at 150 mM extraliposomal NaCl than at 50 mM. The eutectic crystals were thought to cause additional leakage from the LUV (B).     

Fully automated determination of parabens, triclosan and methyl triclosan in wastewater by microextraction by packed sorbents and gas chromatography-mass spectrometry

A fully automated method for the determination of triclosan (TCS), its derivative methyl triclosan (MeTCS) and six parabens (esters of 4-hydroxybenzoic acid) including branched and linear isomers of propyl (i-PrP and n-PrP) and butyl paraben (i-BuP and n-BuP) in sewage water samples is presented. The procedure includes analytes enrichment by microextraction by packed sorbent (MEPS) coupled at-line to large volume injection-gas chromatography-mass spectrometry (LVI-GC-MS). Under optimised conditions, compounds were extracted from 2 mL samples, adjusted at pH 3, using a C18 MEPS-sorbent. Adsorbed analytes were eluted directly into the Programmable Temperature Vaporizer (PTV) injector of the chromatograph with 2×25 μL of ethyl acetate. They were quantified using standard solutions in ultrapure water submitted to the same sample enrichment process as real sewage water samples. After signal normalisation using isotopic labelled species as internal surrogates, no differences were noticed among the extraction efficiency for sewage and ultrapure water; moreover, the proposed method reported lineal calibration curves from 0.1 to 10 ng mL(-1), relative standard deviations (%RSD) between 2 and 7.1% and limits of detection (LODs) varying from 0.001 to 0.015 ng mL(-1) in ultrapure water and from 0.02 to 0.59 ng mL(-1) in the most complex sample (raw wastewater).