Biodegradable/biocompatible ABC triblock copolymer bearing hydroxyl groups in the middle block

New biodegradable/biocompatible ABC block copolymers, poly(ethylene oxide)‐b‐poly(glycidol)‐b‐poly(L ,L ‐lactide) (PEO‐PGly‐PLLA), were synthesized. First, PEO‐b‐poly(1‐ethoxyethylglycidol)‐b‐PLLA was synthesized by a successive anionic ring‐opening copolymerization of ethylene oxide, 1‐ethoxyethylglycidyl ether, and L ,L ‐lactide initiated with potassium 2‐methoxyethanolate. In the second step, the 1‐ethoxyethyl blocking groups of 1‐ethoxyethylglycidyl ether were removed at weakly acidic conditions leaving other blocks intact. The resulting copolymers were composed of hydrophilic and hydrophobic segments joined by short polyglycidol blocks with one hydroxyl group in each monomeric unit. These hydroxyl groups may be used for further copolymer transformations. The PEO‐PGly‐PLLA copolymers with a molecular weight of PLLA blocks below 5000 were water‐soluble. Above the critical micellar concentration (ranging from 0.05 to1.0 g/L, depending on the composition of copolymer), copolymers formed macromolecular micelles with a hydrophobic PLLA core and hydrophilic PEO shell. The diameters of the micelles were about 25 nm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3750–3760, 2003     

On interpolatory divergence-free wavelets

We construct interpolating divergence-free multiwavelets based on cubic Hermite splines. We give characterizations of the relevant function spaces and indicate their use for analyzing experimental data of incompressible flow fields. We also show that the standard interpolatory wavelets, based on the Deslauriers-Dubuc interpolatory scheme or on interpolatory splines, cannot be used to construct compactly supported divergence-free interpolatory wavelets.

     

Pressure-temperature phase diagrams of smectogenic 4'-alkyl-4-cyanobiphenyls (9CB, 10CB, 11CB and 12CB)

The pressure-temperature ( p - T ) phase diagrams for four smectogenic members of the 4'-alkyl-4-cyanobiphenyl homologous series ( n CB, n =9, 10, 11 and 12) over the temperature range 320-410 K and pressure range 0.1-300 MPa (3 kbar) were constructed using DTA. At 1 atm 9CB exhibits nematic and smectic A d phases, while the other members show only the smectic A d phase. However, at elevated pressures the clearing line splits in the case of 10CB and 11CB which indicates the induction of a nematic phase. It was found that the triple point, where the isotropic, nematic and smectic phases coexist, is strongly shifted to higher pressures with increasing chain length. This was interpreted as being caused by a loss of the rod-like shape of the molecules containing longer alkyl tails which explore a range of conformations. The slope of the clearing line, d T /d p , depends strongly on the length of the alkyl chain for the n CB series, but does not show a step-wise change between the nematogenic and smectogenic members.     

Structural investigations of metal clusters by HREM

Silver clusters grown by the inert gas aggregation technique have been investigated by HREM. Undistorted cuboctahedra and icosahedra together with twinned particles have been observed. Three types of nucleation and growth mechanisms are proposed which can explain the observed particle structures. The untwinned large particles are created by the coalescence of liquid- like small clusters. The twins are produced by the coalescence of solid subunits.     

CO laser stabilization using the optogalvanic Lamb-dip

Frequency stabilization of the CO laser using a CO lamb-dip is achieved in the range from 5.0–6.3 m. The CO saturation signal is obtained from a low-pressure discharge in absorption and is detected using optogalvanic, detection. The frequency stability and reproducibility has been verified to be better than 100 kHz; this is an improvement of more than one order of magnitude compared with locking techniques using CO laser gain profiles.Alexander von Humboldt Awardee from National Bureau of Standards, Boulder, Colorado, USA     

Preparation of 1-ferrocenyl-2-methyl-1-propylamine,a highly effective chiral template in asymmetrically induced synthesis

The 1-ferrocenyl-2-methyl-1-propylamine (2a)is the most effective chiral template in asymmetrically induced peptide synthesis by stereoselective four component condensation (4CC). Two routes for the synthesis of this amine via its N,N-dimethyl derivative (12a) an described. One route involves the conversion of 12a into the corresponding azide 14a by treatment with methyl iodide/sodium azide in diglyme/water and subsequent reduction of the azide. The preferred other route consists of treating 12a with thioglycolic acid/formic acid to yield the carboxymethylmercapto derivative 9a and transformation of the latter into 2a with aqueous ammonia/ammonium chloride/mercuric chloride. Some related reactions are also discussed.     

Photoreactivation of RNA in UV-irradiated insect eggs (Smittia sp., Chironomidae, Diptera) II. Evidence for heterogeneous light-dependent repair activities

Abstract. Two biological effects of UV radiation upon Smittia eggs are observed, both of which seem to be associated with the formation of pyrimidine dimers in the RNA (largely ribosomal) of the eggs. While irradiation of the anterior pole region causes the formation of an aberrant segment pattern (double abdomen induction), irradiation of entire eggs leads to an arrest of their development (inactiva-tion). Both UV effects are photoreversible with different action spectra of the photoreactivating light. A dose rate dependence of the photoreactivation can be observed after both UV effects. The saturating dose rate is about 6 W/m² (at 440 nm) after UV induction of double abdomens. Upon UV inactivation, the saturating dose rate level for the photoreactivating light is much higher, and a single light flash causes both a considerable biological reactivation and the disappearance of about 7 × 10⁹ pyrimidine dimers from the total RNA per egg. The results indicate the presence of heterogeneous light-dependent repair activities acting upon UV induced pyrimidine dimers in the RNA of the eggs.     

Hollow colloidal particles obtained by nano-extrusion in the presence of phospholipids

Using nano- and microsize extrusion, a simple synthetic procedure of preparing hollow monodispersed colloidal particles dispersed in an aqueous phase was developed. Hydrophobic styrene monomer containing 2-hydroxy-2-methyl propiophenone photoinitiator was forced into desired diameter membrane channels and stabilized by the hydrophobic regions of a liposome obtained from 1,2-dilauroyl-phosphocholine phospholipid in an aqueous phase. Such moieties exposed to 254-nm UV radiation polymerize monomers in the hydrophobic zone of the liposome, thus resulting in reinforced hollow vesicles. The size of such particles is controlled by the size of the membrane channels in the extruder and may vary from a few nanometers to micrometers, thus allowing the synthesis of monodisperse hollow colloidal spheres.     

Release and formation of surface-localized ionic clusters (SLICs) into phospholipid rafts from colloidal solutions during coalescence

Stimuli-responsive behavior of phospholipids in the presence of ionic surfactants utilized in synthesis of MMA/nBA colloidal particles was investigated. Utilizing 1-myristoyl-2-hydroxy-sn-glycero-phosphocholine (MHPC) phospholipid, and sodium dioctyl sulfosuccinate (SDOSS) surfactant as dispersing media in H(2)O, narrow unimodal particle size distributions of methyl methacrylate (MMA)/n-butyl acrylate (nBA) copolymers were synthesized. The particle diameters were 154 nm when a SDOSS/MHPC mixture was used and 161 nm using MHPC as the only surface-stabilizing species. When such colloidal dispersions are exposed to 1.7, 3.3, and 6.7 mM aqueous CaCl(2) and KCl electrolyte solutions, surface-localized ionic clusters are generated at the film-air interface that may serve as lipid rafts composed of crystalline phases of MHPC deposited on poly(MMA)/nBA films. These studies illustrate that it is possible to control release and morphology developments of surface phospholipid rafts on artificial surfaces.