Magnetic resonance imaging and pulsed Doppler sonography of poststenotic jets: Correlation between signal void and flow velocity distribution

To correlate the appearance of poststenotic jets on gradient echo images with features of localized Doppler spectra of the jets, we studied an in vitro model of steady flow-through stenoses of 86, 96, and 99% area reduction. As fluids, water and a 40% glycerol solution in water were used. MRI was performed with a 1.5 T whole body imager and gradient echo images were obtained in planes parallel to the direction of flow. Doppler spectra were acquired separately from the MR measurements at 1 cm intervals for a distance of 10 cm downstream from the stenosis. Poststenotic signal void was observed for water and for the 40% glycerol solution only if the mean velocity within the stenosis exceeded a limit of 50–60 cm/sec. On the MR images, the jets could be divided into two segments: A proximal jet segment of uniform width equal to the diameter of the stenosis, followed by a distal jet segment which was characterized by broadening and then dissipating signal void. Except for the 99% stenosis, a high signal intensity core was present within the proximal jet segment. In the proximal jet segment, the Doppler measurements showed a low temporal fluctuation of the maximal flow velocity and only little flow opposite to the main flow direction. In the distal jet segment, the velocity fluctuation and the intensity of reverse flow increased sharply. The high signal intensity core of the jet was associated with a poststenotic zone of constant maximal flow velocity. The results demonstrate a close relationship between characteristic features of poststenotic jets in MRI and pulsed Doppler sonography.     

Dynamic percolation in water in oil microemulsions revisited

Microemulsions (dispersions of water droplets, typical radius about 10 nm, in oil) show a particular percolation pattern, a so-called dynamical percolation. Predictions of scaling theory and Monte Carlo simulations were compared with experimental static and frequency dependent conductivity data. The latter gives evidence of two different time scales of charge transport.Dedicated to Professor Harry Thomas on the occasion of his 60th birthday     

Design and synthesis of a transferable farnesyl pyrophosphate analogue to Ras by protein farnesyltransferase

The posttranslational addition of a farnesyl moiety to the Ras oncoprotein is essential for its membrane localization and is required for both its biological activity and ability to induce malignant transformation. We describe the design and synthesis of a farnesyl pyrophosphate (FPP) analogue, 8-anilinogeranyl pyrophosphate 3 (AGPP), in which the omega-terminal isoprene unit of the farnesyl group has been replaced with an aniline functionality. The key steps in the synthesis are the reductive amination of the alpha,beta-unsaturated aldehyde 5 to form the lipid analogue 6, and the subsequent conversion of the allylic alcohol 7 to the chloride 8 via Ph(3)PCl(2) followed by displacement with [(n-Bu)(4)N](3)HP(2)O(7) to give AGPP (3). AGPP is a substrate for protein farnesyltransferase (FTase) and is transferred to Ras by FTase with the same kinetics as the natural substrate, FPP. AGPP is highly selective, showing little inhibitory activity against either geranylgeranyl-protein transferase type I (GGTase I) (K(i) = 0.06 microM, IC(50) = 20 microM) or squalene synthase (IC(50) = 1000 microM). AGPP is the first efficiently transferable analogue of FPP to be modified at the omega-terminus that provides a platform from which additional analogues can be made to probe the biological function of protein farnesylation. AGPP is the first example of a class of compounds that are alternate substrates for protein isoprenylation that are not inhibitors of squalene synthase.     

Facile and efficient synthesis of 4-azidotetrafluoroaniline: a new photoaffinity reagent

p-Azidotetrafluoroaniline (1) was synthesized in 65-73% yield by two different methods employing a stable carbamate intermediate. The first method trapped the intermediate isocyanate generated via a modified Curtius rearrangement with 2-methyl-2-propanol or 2-(trimethylsilyl)ethanol to form the stable carbamates 2d and 2e, respectively. Benzoic acid 2c was first converted to its acid chloride with PCl(5). Displacement of the chloride by NaN(3) in acetone/water formed the acyl azide. Thermal rearrangement followed by the addition of the appropriate alcohols provided the carbamates. The acid labile carbamate 2d was deprotected with HCl/AcOH to provide 1, while trifluoroacetic acid was required to deprotect 2e and afford 1. In the second path, 1 was synthesized in five steps from pentafluoronitrobenzene (3a) in 65% overall yield. Compound 3a was converted into 4-azidotetrafluoronitrobenzene (3b) with NaN(3) in 93% yield and was used without further purification to form 1, 4-diaminotetrafluorobenzene (3c) by Sn/HCl reduction in 85% yield. The mono-9-fluorenylmethoxycarbonyl (FMOC) derivative 3d was formed from 3c with FMOC-Cl and pyridine in EtOAc in 92% yield. Diazotization of 3d under anhydrous conditions with TFA/NaNO(2) and NaN(3) gave 3e in 87% yield. The aryl azide was formed with concurrent nitration of the 2-position of the fluorenyl system. The protecting group was removed with piperidine to afford 1 in 93% yield. Irradiation of 1 with 254 nm light in cyclohexane gave cyclohexylamine 11, diamine 3c, and azobenzene 12 as the primary products. The formation of C-H insertion product 11 indicates that 1 forms a singlet nitrene upon photolysis. Two heterobifunctional photoaffinity reagents iodoacetamide 9 and dansyl derivative 10 were prepared.     

Two-Photon-Induced CO-Releasing Molecules as Molecular Logic Systems in Solution,Polymers, and Cells

Phototherapeutic applications of carbon monoxide (CO)-releasing molecules are limited because they require harmful UV and blue light for activation. We describe two-photon excitation with NIR light (800 nm)-induced CO-release from two Mn^I tricarbonyl complexes bearing 1,8-naphthalimide units ( 1 , 2 ). Complex 2 behaves as a logic OR gate in solution, nonwovens, and in HeLa cells. CO release, indicated by fluorescence enhancement, was detected in solution, nonwoven, and HeLa cells by single- (405 nm) and two-photon (800 nm) excitation. The photophysical properties of 1 and 2 have been measured and supported by DFT and TDDFT quantum chemical calculations. Both photoCORMs are stable in the dark in solution and noncytotoxic, leading to promising applications as phototherapeutics with NIR light.     

Well‐Defined Molecular Magnesium Hydride Clusters: Relationship between Size and Hydrogen‐Elimination Temperature

A new tetranuclear magnesium hydride cluster, [{ NN ‐(MgH)₂}₂], which was based on a N? N‐coupled bis‐β‐diketiminate ligand ( NN ^2?), was obtained from the reaction of [{ NN ‐(MgnBu)₂}₂] with PhSiH₃. Its crystal structure reveals an almost‐tetrahedral arrangement of Mg atoms and two different sets of hydride ions, which give rise to a coupling in the NMR spectrum (J=8.5 Hz). To shed light on the relationship between the cluster size and H₂ release, the thermal decomposition of [{ NN ‐(MgH)₂}₂] and two closely related systems that were based on similar ligands, that is, an octanuclear magnesium hydride cluster and a dimeric magnesium hydride species, have been investigated in detail. A lowering of the H₂‐desorption temperature with decreasing cluster size is observed, in line with previously reported theoretical predictions on (MgH₂)_n model systems. Deuterium‐labeling studies further demonstrate that the released H₂ solely originates from the oxidative coupling of two hydride ligands and not from other hydrogen sources, such as the β‐diketiminate ligands. Analysis of the DFT‐computed electron density in [{ NN ‐(MgH)₂}₂] reveals a counterintuitive interaction between two formally closed‐shell H^? ligands that are separated by 3.106 Å. This weak interaction could play an important role in H₂ desorption. Although the molecular product after H₂ release could not be characterized experimentally, DFT calculations on the proposed decomposition product, that is, the low‐valence tetranuclear Mg(I) cluster [( NN ‐Mg₂)₂], predict a structure with two almost‐parallel, localized Mg? Mg bonds. As in a previously reported β‐diketiminate Mg^I dimer, the Mg? Mg bond is not characterized by a bond critical point, but instead displays a local maximum of electron density midway between the atoms, that is, a non‐nuclear attractor (NNA). Interestingly, both of the NNAs in [( NN ‐Mg₂)₂] are connected through a bond path that suggests that there is bonding between all four Mg^I atoms.     

Alkylation of dihydrofullerenes

The fulleride dianions C(60)(2-) and C(70)(2-) were generated by deprotonation of the corresponding hydrogenated fullerenes, 1,2-C(60)H(2) and 1,2-C(70)H(2). These anions were prepared in the presence of a variety of alkylating agents, and mono- or dialkylated products were obtained. Alkylation was not successful with sulfonate ester alkylating agents. Deprotonation of monoalkylated compounds, followed by second alkylation with a different alkylating agent, produced heterodialkylated compounds. The monoalkyated material was invariably the 1,2-isomers, while the dialkylated materials were generally 1,4-isomers, although some 1,2-isomer was observed in the C(70) context. The major product from alkylation of C(70)(2-) was the 7,23-isomer 13a, a structure where the alkylation took place near the equator of the fullerene cage, rather than at the more strained carbons near the poles.     

Regulatory use of (Q)SARs in toxicological hazard assessment strategies

In 2001, the European Commission published a policy statement ("White Paper") on future chemicals regulation and risk reduction that proposed the use of non-animal test systems and tailor-made testing approaches, including (Q)SARs, to reduce financial costs and the number of test animals employed. The authors have compiled a database containing data submitted within the EU chemicals notification procedure. From these data, (Q)SARs for the prediction of local irritation/corrosion and/or sensitisation potential were developed and published. These (Q)SARs, together with an expert system supporting their use, will be submitted for official validation and application within regulatory hazard assessment strategies. The main features are: two sets of structural alerts for the prediction of skin sensitisation hazard classification as defined by the European risk phrase R43, comprising 15 rules for chemical substructures deemed to be sensitising by direct action with cells or proteins, and three rules for substructures acting indirectly, i.e., requiring biochemical transformation; a decision support system (DSS) for the prediction of skin and/or eye lesion potential built from information extracted from our database. This DSS combines SARs defining reactive chemical substructures relevant for local lesions to be classified, and QSARs for the prediction of the absence of such a potential. The role of the BfR database, and (Q)SARs derived from it, in the use of current and future (EU) testing strategies for irritation and sensitisation is discussed.