A Kind of Electrode Enhanced the Electrochemiluminescence

Electrochemiluminescence (ECL), like other chemiluminescence technique, offers high signal-to-noise ratio. Furthermore, it has the advantage over other chemiluminescence techniques of being initiated by a voltage potential. Thus, it provides a better-controlled luminescence. This technique has been used in measuring many kinds of organic and inorganic matters, and analyzing many kinds of antigen, antibody and hapten, such as carcinoembryonic antigen and alpha-fetoprotein, etc1-6. The ele…     

Direct microbial conversion

Applied Biochemistry and Biotechnology - Process development is reviewed for ethanol production from cellulosic biomass via direct microbial conversion (DMC). Experimental data addressing cellulase...     

苯丙水溶胶的合成与性能研究(I) 聚合工艺和反应组分对聚合稳定性和胶体性能的影响

用一次投料法、半连续滴加法和单体预乳化法三种聚合工艺，合成了苯丙乳液聚合物，并加氨微细化，转化成水溶胶，考察了聚合工艺和反应组分（乳化剂，功能单体等）对苯丙乳液及其水溶胶反应稳定性和粒子大小及分布等胶体性能的影响。     

Electro-oxidation of carbon monoxide on well-ordered Pt(111)/Sn surface alloys

The electro-oxidation of CO on model platinum-tin alloy catalysts has been studied by ex-situ electrochemical measurements following the preparation of the Pt(111)/Sn(2x2) and Pt(111)/Sn(radical3 x radical3)R30 degrees surfaces. A surface redox couple, which is associated with the adsorption/desorption of hydroxide on the Sn sites, is observed at 0.28 V(RHE)/0.15 V(RHE) in H(2)SO(4) electrolyte on both surfaces. Evidence that it is associated with the adsorption of OH comes from ex-situ photoemission measurements, which indicate that the Sn atoms are in a metallic state at potentials below 0.15 V(RHE) and an oxidized state at potentials above 0.28 V(RHE). Specific adsorption of sulfate anions is not associated with the surface process since there is no evidence from photoemission of sulfate adsorption, and the same surface couple is observed in the HClO(4) electrolyte. CO is adsorbed from solution at 300 K, with saturation coverages of 0.37 +/- 0.05 and 0.2 +/- 0.05 ML, respectively. The adsorbed CO is oxidatively stripped at the potential coincident with the adsorption of hydroxide on the tin sites, viz., 0.28 V(RHE). This strong promotional effect is unambiguously associated with the bifunctional mechanism. The Sn-induced activation of water, and promotion of CO electro-oxidation, is sustained as long as the alloy structure remains intact, in the potential range below 0.5 V(RHE). The results are discussed in the light of the requirements for CO-tolerant platinum-based electrodes in hydrogen fuel cell anode catalysts and catalysts for direct methanol electro-oxidation.     

气固吸附等温线的研究进展

综述了近些年来在气固吸附理论研究领域对吸附等温线的研究进展。论述了从早期的BDDT的5种类型吸附等温线，到IUPAC的6种类型吸附等温线，再到基于Ono-kondo晶格模型的Gibbs吸附分类的5种类型吸附等温线．讨论了与各种类型吸附等温线类型相对应的吸附机理，并对滞留回环现象进行了解释和分析。     

脱色阴离子交换剂的再生研究

提出一种新的离子交换剂再生理论，即吸附物的脱附依靠离子交换和络合的协同效应完成．以二价钙离子为再生剂，对糖液脱色用的阴离子交换树脂和阴离子交换纤维进行再生，并与传统的碱性钠盐相比较，研究证明钙离子为再生剂的工艺，具有低成本、无污染的特点．     

Synthesis and reactions of halogenated thiazole isocyanates

A synthesis of 2-chloro-4-(trifluoromethyl)-5-isocyanatothiazole and 2,5-dichloro-5-isocyanatothiazole is described via the “Curtius Rearrangement” performed under anhydrous conditions. The synthetic procedure described allows for the isolation, storage, and manipulation of these highly reactive isocyanates. A number of derivatives of the above isocyanates were prepared. These include: carbamates, thiocarbamates, ureas, amines, amidines, and amides.     

Multi-step polymer-assisted solution-phase (PASP) library synthesis of functionalized diaminobenzamides

A parallel solution-phase library synthesis of functionalized diaminobenzamides is described. The four-step library synthesis is accomplished using polymer-assisted solution-phase (PASP) synthesis techniques. This high-yielding, multi-step sequence utilizes sequestering resins for the removal of reactants, reactant by-products, and employs a resin capture/release strategy as a key library synthesis step. Step one of the sequence relies on the displacement of an activated fluoro-group from the aromatic ring of 1a, b with a variety of primary amines to introduce the first diversity position. Step two is hydrolysis of the benzoate ester to a benzoic acid which is subsequently captured on a polyamine resin, washed, and released to give 4a, b in pure form. Step three utilizes PASP resins to mediate the amide coupling of a benzoic acid with a variety of primary amines to give the aminonitrobenzamides 5a, b and introduces the second diversity position. Step four is the parallel reduction of the aminonitrobenzamides 5a, b to the functionalized diaminobenzamides 6a, b. This library synthesis proceeds with high overall purities which average 80 % over the 4-step sequence.     

Clean Aerobic Liquid Oxidation of Aldehydes with Solid Catalyst

Clean liquid oxidation of aldehydes can be accomplished using solid catalyst in the presence of molecular oxygen at room temperature, which is a valuable alternative to traditional counterparts.