Resummation of the jet broadening in DIS

We calculate the leading and next-to-leading logarithmic resummed distribution for the jet broadening in deep inelastic scattering, as well as the power correction for both the distribution and mean value. A truncation of the answer at NLL accuracy, as is standard, leads to unphysical divergences. We discuss their origin and show how the problem can be resolved. We then examine DIS specific procedures for matching to fixed order calculations and compare our results to the data. One of the tools developed for the comparison is an NLO parton distribution evolution code. When compared to PDF sets from MRST and CTEQ it reveals limited discrepancies in both. Received: 16 October 2001 / Published online: 12 April 2002     

Measurement of storage time, estimation of ion number and study of absorption line profile in a Paul trap

Europium (Eu⁺) ions were confined in a Paul trap and detected by non-destructive method. Storage time of Eu⁺ ions achieved in vacuum was improved by orders of magnitude employing buffer gas cooling. The experimentally detected signal was fitted to the ion response signal and the total number of ions trapped was estimated. It is found that the peak signal amplitude as well as the product of FWHM and the peak signal amplitude is proportional to the total number of trapped ions. The trapped ion secular frequency was swept at different rates and its effect on the absorption line profile was studied both experimentally and theoretically.     

Stored energy release behaviour of disordered carbon

The use of graphite as a moderator in a low temperature thermal nuclear reactor is restricted due to accumulation of energy caused by displacement of atoms by neutrons and high energetic particles. Thermal transients may lead to a release of stored energy that may raise the temperature of the fuel clad above the design limit. Disordered carbon is thought to be an alternative choice for this purpose. Two types of disordered carbon composites, namely, CB (made up of 15 wt. % carbon black dispersed in carbonized phenolic resin) and PAN (made up of 20 vol. % chopped polyacrylonitrile carbon fibre dispersed in carbonized phenolic resin matrix) have been irradiated with 145 MeV Ne⁶⁺ ions at three fluence levels of 1.0×10¹³, 5.0×10¹³ and 1.5×10¹⁴ Ne⁶⁺/cm², respectively. The XRD patterns revealed that both the samples remained disordered even after irradiation. The maximum release of stored energy for CB was 212 J/g and that of PAN was 906 J/g. For CB, the release of stored energy was a first order reaction with activation energy of 2.79 eV and a frequency factor of 3.72×10²⁸ per second. 13% of the defects got annealed by heating up to 700 °C. PAN showed a third-order release rate with activation energy of 1.69 eV and a frequency factor of 1.77×10¹⁴ per second. 56% of the total defects got annealed by heating it up to 700 °C. CB seems to be the better choice than PAN as it showed less energy release with a slower rate. PACS 61.80.Jh; 61.80.-x; 61.43Er; 61.43.-j; 68.43.Vx     

Kinetics of reduction of ruthenium(III) by sodium tetrahydroborate

Summary The kinetics of reduction of ruthenium(III) by sodium tetrahydroborate in aqueous acidic medium have been studied. The effect of variation in the concentration of substrate (RuCl₃·3H₂O), pH, and reductant (BH₄ ^–1) has been studied. The activation parameters were evaluated. Based on a one-electron transfer, the mechanism involves the reduction of ruthenium(III) by hydrogen.     

Disentangling the reaction mechanisms of weakly bound nuclei

Complete and incomplete fusion cross sections for the ⁹Be + ¹⁴⁴Sm reaction have been measured at near-barrier energies, using the delayed X-ray detection technique. At above-barrier energies these show a suppression of complete fusion for this weakly bound projectile on an intermediate mass target. The suppression factor, attributed to ⁹Be break-up, was deduced from a comparison of complete fusion yields with coupled-channels calculations, and appears consistent with measured incomplete fusion product yields. At ∼10%, it is considerably smaller than the value of ∼30% previously found for a ²⁰⁸Pb target. Simultaneous measurements of elastic and inelastic scattering permit a clearer picture of the reaction mechanisms.     

Determination of aqueous ozone for potable water treatment applications by chemiluminescence flow-injection analysis. A feasibility study

The feasibility of determining aqueous ozone by chemiluminescence flow-injection analysis (CL-FIA) was studied for applications in potable water treatment. The ozonated water sample is injected into a pure water carrier and mixed with a dye reagent in front of a photodetector. Many reagents undergo fast CL reactions with aqueous ozone. Most of these reactions display considerable selectivity for ozone over other oxidants of importance in water treatment. Even when there is steady-state response to another oxidant, significant discrimination against the interferents is possible by taking advantage of the much faster kinetics of the CL reaction with ozone. A simple design of a Siemens-type ozone generator and preparation of standard ozone solutions are also described.     

Superheated water eluent capillary liquid chromatography

A capillary scale reverse phase liquid chromatography (LC) system using a super hot water eluent is described. The system, constructed in-house from readily available components, has been shown to operate at temperatures as high as 370 °C and pressures in excess of 10 000 psi. The capability of the system is demonstrated with the separation of a mixture of polar and non-polar benzene derivatives on polybutadiene and elemental carbon modified zirconia packings with or without temperature gradients. Six benzene derivatives can be separated in 2 min.     

Cluster isobars for high-precision mass spectrometry

Doublet mass measurements of the isobars²⁸Si₃ and¹²C₇ are performed by use of a Penning trap mass spectrometer and the Fourier transform ion cyclotron resonance (FT-ICR). The carbon and silicon cluster ions are produced by laser ablation. Results of these preliminary measurements are presented.     

Mixed micellization of an anionic gemini surfactant (GA) with conventional polyethoxylated nonionic surfactants in brine solution at pH 5 and 298 K

The micellization behavior of an anionic gemini surfactant, GA with nonionic surfactants C₁₂E₈ and C₁₂E₅ in presence of 0.1 M NaCl at 298 K temperature, has been studied tensiometrically in pure and mixed states, and the related physicochemical parameters (cmc, γ _cmc, pC ₂₀, Γ _max, and A _min) have been evaluated. Tensiometric profile (γ vs log [surfactant]), for conventional surfactants, generally consists of a single point of intersection; a gradually decreasing line (normally linear, or with slight curvature) ultimately saturates in γ at a particular [surfactant], corresponding to complete monolayer saturation. The gemini, in this report, led to two unequivocal breaks in the tensiometric isotherm. An attempt to the interpretation of the two breaks from molecular point of view is provided, depending solely on the chemical structure of the surfactant. The gemini, even in mixed state with the conventional nonionic surfactants C₁₂E₅ and C₁₂E₈, manifested the dual breaks; of course, the dominance of the feature decreases with increasing mole fraction of the nonionics in the mixture. Theories of Clint, Rosen, Rubingh, Motomura, Georgiev, Maeda, and Nagarajan have been used to determine the interaction between surfactants at the interface and micellar state of aggregation, the composition of the aggregates, the theoretical cmc in pure and mixed states, and the structural parameters according to Tanford and Israelachvili. Several thermodynamic parameters have also been predicted from those theories.     

Surfactant tail length-dependent lipase activity profile in cationic water-in-oil microemulsions

The catalytic activity of Chromobacterium viscosum lipase (CV-lipase) was estimated across varying surfactant tail lengths (C-10-C-18) in water-in-oil (w/o) microemulsions of cationic surfactants containing four different hydroxyethyl-substituted head groups. An attempt to find a correlation, if any, between the activity of interfacially solubilized lipase and the varying surfactant tails was made for the first time in micellar enzymology. The second-order rate constant, k2, in lipase-catalyzed hydrolysis of p-nitrophenyl-n-hexanoate at pH 6.0 and 25 degrees C shows an improvement in enzyme activity (approximately 30-140%) across different head groups of amphiphiles with increasing tail lengths in varying solution compositions. Improvement of enzyme activity is prominent in ascending from C-10 to C-14/C-16, depending on the nature of polar head group. The hydrolytic activity of lipase in different surfactant (50 mM)/water/isooctane/n-hexanol with varying z= [alcohol]/[surfactant] (6.4 or 4.8) was amplified by 25-250% with increment in surfactant tail length in comparison with widely used cationic w/o microemulsions having solution compositions (z=16). As a notable outcome of this research, we found w/o microemulsions of 25 mM tetradecyltrimethylammonium bromide/water/isooctane/n-hexanol (z=8) producing the highest ever activity of lipase in any w/o microemulsions.