Direct chemical ionization mass silylated iridoid glucosides

The direct chemical ionization mass spectra with isobutane of 14 silylated iridoid glucosides of different structural types were studied. The dependence of the intensity of different peaks on the structure and stereochemistry of the investigated compounds is discussed.     

Thermodynamic and kinetic data for adduct formation, cis-trans isomerization and redox reactions of ML4 complexes: a case study with rhodium- and iridium-tropp complexes in d8, d9 and d10 valence electron configurations (tropp=dibenzotropylidene phosphanes)

The formation of adducts of the square-planar 16-electron complexes trans-[M(tropp(ph))(2)](+) and cis-[M(tropp(ph))(2)](+) (M=Rh, Ir; tropp(Ph)=5-diphenylphosphanyldibenzo[a,d]cycloheptene) with acetonitrile (acn) and Cl(-), and the redox chemistry of these complexes was investigated by various physical methods (NMR and UV-visible spectroscopy, square-wave voltammetry), in order to obtain some fundamental thermodynamic and kinetic data for these systems. A trans/cis isomerization cannot be detected for [M(tropp(ph))(2)](+) in non-coordinating solvents. However, both isomers are connected through equilibria of the type trans-[M(tropp(ph))(2)](+)+L<==>[ML(tropp(ph))(2)](n)<==>cis-[M(tropp(ph))(2)](+)+L, involving five-coordinate intermediates [ML(tropp(ph))(2)](n) (L=acn, n=+1; L=Cl(-), n=0). Values for K(d) (K(f)), that is, the dissociation (formation) equilibrium constant, and k(d) (k(f)), that is, the dissociation (formation) rate constant, were obtained. The formation reactions are fast, especially with the trans isomers (k(f)>1x10(5) m(-1) s(-1)). The reaction with the sterically more hindered cis isomers is at least one order of magnitude slower. The stability of the five-coordinate complexes [ML(tropp(ph))(2)](n) increases with Ir>Rh and Cl(-)>acn. The dissociation reaction has a pronounced influence on the square-wave (SW) voltammograms of trans/cis-[Ir(tropp(ph))(2)](+). With the help of the thermodynamic and kinetic data independently determined by other physical means, these reactions could be simulated and allowed the setting up of a reaction sequence. Examination of the data obtained showed that the trans/cis isomerization is a process with a low activation barrier for the four-coordinate 17-electron complexes [M(tropp(ph))(2)](0) and especially that a disproportionation reaction 2 trans/cis-[M(tropp(ph))(2)](0)-->[M(tropp(ph))(2)](+)+[M(tropp(ph))(2)](-) may be sufficiently fast to mask the true reactivity of the paramagnetic species, which are probably less reactive than their diamagnetic equilibrium partners.     

Kinetic studies on the foam separation of thorium (IV) with sodium lauryl sulphate

Summary The effects of pH, gas flow rate and collector concentration on the rate of thorium removal by foaming with sodium lauryl sulphate have been investigated. The obtained data indicate that only aged hydrated thorium oxide is removed by a flotation mechanism. All the other colloidal and condensed thorium species as well as the colloidal sublates which are formed between the dissolved thorium species and the collector anions appear to be removed by partition and their removal rates could be described by a reversible first-order rate equation. The obtained results are discussed in terms of thorium hydrolysis.

---

Zusammenfassung Der Einfluß der pH-Werte, Gasdurchflußmengen und Kollektor-Konzentration auf die Geschwindigkeit der Entfernung des Thoriums durch Schaumbildung mit Natrium-Lauryl-Sulfat wurde untersucht. Die Ergebnisse zeigen, daß das gealterte, wässerige Thoriumoxid durch Flotations-Mechanismen entfernt wird. Die anderen kolloidalen und kondensierten Thorium-Spezien und auch die Kolloidalprodukte, die durch Reaktionen zwischen den gelösten Thoriumspezien und den Kollektor-Anionen formiert sind, sind durch die Verteilung entfernt worden. Die Entfernungsgeschwindigkeit kann beschrieben werden durch eine reversible 1. Ordnungs-Gleichung. Die Ergebnisse werden in Abhängigkeit einer ThoriumHydrolyse diskutiert.

---

---

With 7 figures     

Asymmetric aldol reactions catalyzed by the promiscuous aldo–ketoreductase enzyme

The promiscuous aldo–ketoreductase (AKR) enzyme is used as a sustainable biocatalyst for the first time to catalyze asymmetric aldol reactions in aqueous medium. The reactions between aromatic aldehydes and cyclic/acyclic ketones give the corresponding products in moderate yields and enantioselectivities in the presence of water. The influence of solvents, the mole ratio of substrates, and enzyme concentration are investigated. The mechanism of the AKR1A1-catalyzed aldol reaction is also discussed.     

Brief survey on phytochemicals to prevent COVID-19

BackgroundThe recent pandemic by COVID-19 is a global threat to human health. The disease is caused by SARS-CoV-2 and the infection rate is increased more quickly than MERS and SARS as their rapid adaptation to varied climatic conditions through rapid mutations. It becomes more severe due to the lack of proper therapeutic drugs, insufficient diagnostic tool, scarcity of appropriate drug, life supporting medical facility and mostly lack of awareness. Therefore, preventive measure is one of the important strategies to control. In this context, herbal medicinal plants received a noticeable attention to treat COVID-19 in Indian subcontinent. Here, 44 Indian traditional plants have been discussed with their novel phytochemicals that prevent the novel corona virus. The basic of SARS-CoV-2, their common way of transmission including their effect on immune and nervous system have been discussed. We have analysed their mechanism of action against COVID-19 following in-silico analysis. Their probable mechanism and therapeutic approaches behind the activity of phytochemicals to stimulate immune response as well as inhibition of viral multiplication discussed rationally. Thus, mixtures of active secondary metabolites/phytochemicals are the only choice to prevent the disease in countries where vaccination will take long time due to overcrowded population density.     

A new Approach for the Voltammetric Sensing of the Phytoestrogen Genistein at a Non-modified Boron-doped Diamond Electrode

An effective electrochemical sensor was constructed using an unmodified boron-doped diamond electrode for determination of genistein by square-wave voltammetry. Cyclic voltammetric investigations of genistein with HClO₄ solution indicated that irreversible behavior, adsorption-controlled and well-defined two oxidation peaks at about +0.92 (P_A1) & +1.27 V (P_A2). pH, as well as supporting electrolytes, are important in genistein oxidations. Quantification analyses of genistein were conducted using its two oxidation peaks. Using optimized experiments as well as instrumental conditions, the current response with genistein was proportionately linear in the concentrations range of 0.1 to 50.0 μg mL⁻¹ (3.7×10⁻⁷−1.9×10⁻⁴ mol L⁻¹), by the detection limit of 0.023 μg mL⁻¹ (8.5×10⁻⁸ mol L⁻¹) for P_A1 and 0.028 μg mL⁻¹ (1.1×10⁻⁷ mol L⁻¹) for P_A2 in 0.1 mol L⁻¹ HClO₄ solution (in the open circuit condition at 30 s accumulation time). Ultimately, the developed method was effectively applied to detect genistein in model human urine samples by using its second oxidation peak (P_A2).     

Kinetic,isotherm, and mechanism investigations of the removal of nitrate and nitrite from water by the synthesized hydrotalcite Mg–Al

Research on Chemical Intermediates - The objective of this work is to test the effectiveness of hydrotalcite as an adsorbent for the retention of nitrate and nitrite ions and to study the influence...     

Electrochemistry of platinum nanoparticles supported in polypyrrole (PPy)/C composite materials

Conducting polypyrrole (PPy)/C (Vulcan XC-72) composite materials were synthesized by chemical polymerization method. These materials were used as matrix to support platinum nanoparticles, which were produced by the carbonyl chemical route. For the same catalyst loading (50 μg cm⁻²), it was observed that the nature of the composite strongly influences the electrochemical activity of nanoparticulated platinum toward the oxygen reduction reaction in acid medium. The variation of the PPy/C ratio determines the so-called substrate effect for electrocatalysis. Dedicated to Prof. Dr. Teresa Iwasita on the occasion of her 65th birthday in recognition of her numerous contributions to interfacial electrochemistry.     

Singlet and Triplet State Properties and Singlet Oxygen Yield of an Amino-Acyl-Quinoxalinone Yellow Dye

Amino-acyl-quinoxalinone yellow dyes are cyclised analogues of the yellow azomethine dyes developed for, and still used in, silver halide colour photography. Unlike image azomethine dyes, which are rapidly deactivated in their excited states by torsion about the azomethine bond, amino-acyl-quinoxalinone dyes have an interesting photophysics because torsion is not possible due to their cyclised structure. We report results from studies on singlet and triplet state properties, and singlet oxygen yields, of the yellow dye, 7-diethylamino-3-(2,2-dimethyl-propionyl)-5-methyl-1-phenyl-1H-quinoxalin-2-one, in polar and nonpolar solvents. The dye photophysics is characterised by a weak fluorescence, with a solvent dependent emission yield (Φ_F?≈?0.002–0.004), and short singlet state lifetime (τ_expt?≈?20–50 ps), both increasing by a factor of ≈2 in going from polar acetonitrile to non-polar dioxane as solvent. DFT ZINDO calculations show a transition involving significant electron transfer from the diethyl-amino group into the carbonyl region of the molecule. In solution, in the presence of oxygen, the triplet state decays almost exclusively by oxygen quenching, and singlet oxygen is produced in high yield (Φ_??≈?0.5–0.55). The triplet state absorbs across the 450–750 nm region with maxima around 480 and 650 nm, and moderate molar absorption coefficients (ca. 6000–8000 M^?1 cm^?1). In a glass at 77 K, triplet decay gives a red phosphorescence, with λ_max?≈?640–650 nm, and a ?≈?0.25 s lifetime. If singlet oxygen yields are a good indication of triplet yields, then internal conversion and intersystem crossing occur with roughly equal efficiency.

     

Li<Subscript>2</Subscript>HPO<Subscript>3</Subscript>, H<Subscript>2</Subscript>O: Crystal Structure and IR Spectrum

Abstract  

Crystal structure of Li₂HPO₃,H₂O was determined by single-crystal X-Ray diffraction analysis at 173(2) K. It crystallizes in the monoclinic system (P2_1/c) with the parameters: a = 5.0322(9) ?, b = 8.9795(17) ?, c = 17.088(4) ?, β = 92.672(16)° and Z = 8. The structure was refined to R = 0.0237 and ωR = 0.0650 for 1449 reflexions. The framework of Li₂HPO₃, H₂O can be described as layers perpendicular to the crystallographic c axis. The structure contains two types of Li-tetrahedrons. In one kind each O atom belongs to one HPO₃ group, while in the second kind one apex is an O from water. A network of hydrogen bonds interactions insures the connection between the layers.