Carbon precipitation and diffusion in SiGeC alloys under silicon self-interstitial injection

In this work we investigate the diffusion and precipitation of supersaturated substitutional carbon in 200-nm-thick SiGeC layers buried under a silicon cap layer of 40 nm. The samples were annealed in either inert (N₂) or oxidizing (O₂) ambient at 850 °C for times ranging from 2 to 10 h. The silicon self-interstitial (I) flux coming from the surface under oxidation enhances the C diffusion with respect to the N₂-annealed samples. In the early stages of the oxidation process, the loss of C from the SiGeC layer by diffusion across the layer/cap interface dominates. This phenomenon saturates after an initial period (2–4 h), which depends on the C concentration. This saturation is due to the formation and growth of C-containing precipitates that are promoted by the I injection and act as a sink for mobile C atoms. The influence of carbon concentration on the competition between precipitation and diffusion is discussed. Received: 19 October 2001 / Accepted: 19 December 2001 / Published online: 20 March 2002 / Published online: 20 March 2002     

Temporary attachment of carbohydrates to cyclopeptide templates: a new strategy for single-bead analysis of multivalent neoglycopeptides

Employing a cleavable carbohydrate–peptide linker, a new strategy for single-bead analysis of multivalent cyclic neoglycopeptides based on Edman degradation is described. Edman degradation of glycopeptides is hampered by the acid lability of the glycosidic bond and potential incompatibilities of phenylthiohydantoin (PTH) derivatives of glycosylated amino acids with PTH derivatives of the proteinogenic amino acids. To overcome this problem, carbohydrates are detached from the cyclopeptide templates before single-bead analysis, allowing for micro sequencing under routine conditions. With this strategy, application of multivalent cyclic neoglycopeptides in split-mix libraries with a subsequent screening process becomes possible for the first time.     

Ueber Fusspunkts-Curven und -Flächen,Normalen und Normalebenen

Ohne Zusammenfassung     

Ueber die reciproke und mit ihr zusammenhängende Verwandtschaften

Ohne Zusammenfassung     

Untersuchungen über Radium- und Bariumfällungen unter Anwendung von Thorium X als Indikator

Zusammenfassung Zunächst wird im Zusammenhang mit Messungen der Fällungsgeschwindigkeit von Thorium X in sulfathaltigen Lösungen eine Methode beschrieben, die es gestattet, während der Fällung, und zwar ohne Störung des Fällungsvorganges, diejenigen Mengen von Thorium X zu bestimmen, die sich jeweils zu bestimmten Zeitpunkten noch in Lösung befinden; dabei konnte der Gehalt an Th X mit Hilfe einer Emanationsmethode genau ermittelt werden.Die Versuchsergebnisse, die in Kurven wiedergegeben sind, lassen deutlich erkennen, daß die Fällung von Th X nicht momentan erfolgt, sondern eine gewisse Zeit beansprucht, die von der Konzentration der zugesetzten Sulfat- und Bariumchloridlösung sowie vom Zusatz anderer Fremdionen abhängig ist; es wird jedoch schließlich immer der gleiche Endzustand vollständiger Ausfällung erreicht, wenn mit äquivalenten Mengen gearbeitet wird.Die Annahme, daß die Fällung momentan erfolgt, daß aber das Fällungsprodukt sich im Laufe der Zeit von einem feinkristallinischen Zustand mit großer Emanierfähigkeit in einen grobkristallinen mit geringer Emanationsabgabe umwandelt, konnte durch besondere Experimente widerlegt werden.Schließlich wird noch eine Apparatur zur Messung des Thorongehalts angegeben, die auch für Untersuchungen des Thoriumgehalts von Quellwässern Anwendung finden kann.

---

Summary A method has been worked out which makes it possible to determine the rate of precipitation of thorium X in solutions containing sulphate ion. The amount of thorium X is determined rapidly and accurately by the thorium emanation—thoron—evolved under fixed conditions. Determinations have been made every 5 minute during the time following precipitation, and the results are given graphically.They bring forward, very clearly, that the precipitation of thorium X requires a certain length of time, depending on the concentration of the sulphate and barium-chloride solutions used and on the presence of other ions. However, if equivalent quantities of barium- and sulphate ions are used, the same final result is always reached.It might have been supposed that the precipitation takes place instantaneously but that in course of time, the precipitate undergoes changes through recrystallisations and that the emanating power changes accordingly. That hypothesis, however, could be disproved by special experiments.At last an apparatus for measuring the thoron content is given which can also be applied for investigations of the thorium content of source waters.

---

Résumé Les auteurs décrivent une méthode qui leur a permis de déterminer la vitesse de précipitation du thorium X en solutions contenant de l'ion sulfurique. Le thorium X est dosé par son émanation — le thoron — sous des conditions fixées, et les dosages peuvent se faire à intervalles régulières pendant le temps que demande la précipitation.Les résultats montrent que la précipitation du thorium X ne se fait point à l'instant, mais demande un certain temps, dépendant de la concentration des solutions de sulfate et de chlorure de baryum ajoutées et aussi de la présence d'ions étrangers.Les auteurs réfutent par leurs expériences la théorie que la précipitation se fait momentanément et que le précipité change peu à peu son état cristallin et par cela même, sa faculté de dégager l'émanation.Enfin les auteurs décrivent un appareil pour les dosages de thoron, qui pourra servir de même pour déterminer la teneur en thorium dans les eaux vives.

     

Manipulation of microalgal lipid production using genetic engineering

Applied Biochemistry and Biotechnology - Genetic transformation of two species of diatoms has been accomplished by introducing chimeric plasmid vectors containing a bacterial antibiotic resistance...     

Simulation of 59Co NMR chemical shifts in aqueous solution

59Co chemical shifts were computed at the GIAO-B3LYP level for [Co(CN)6]3-, [Co(H2O)6]3+, [Co(NH3)6]3+, and [Co(CO)4]- in water. The aqueous solutions were modeled by Car-Parrinello molecular dynamics (CPMD) simulations, or by propagation on a hybrid quantum-mechanical/molecular-mechanical Born-Oppenheimer surface (QM/MM-BOMD). Mean absolute deviations from experiment obtained with these methods are on the order of 400 and 600 ppm, respectively, over a total delta(59Co) range of about 18,000 ppm. The effect of the solvent on delta(59Co) is mostly indirect, resulting primarily from substantial metal-ligand bond contractions on going from the gas phase to the bulk. The simulated solvent effects on geometries and delta(59Co) values are well reproduced by using a polarizable continuum model (PCM), based on optimization and perturbational evaluation of quantum-mechanical zero-point corrections.     

Synthesis and reactivity of rhodium fluoro complexes

[RhH(CO)(PPh₃)₂] (1) reacts with Et₃N·3HF to give the fluoro compound [RhF(CO)(PPh₃)₂] (2). In a comparable reaction [RhF(PEt₃)₃] (5) has been obtained from [RhH(PEt₃)₃] (3) or [RhH(PEt₃)₄] (4) with substoichiometric amounts of Et₃N·3HF in THF. If the latter reaction is carried out in benzene, the complexes 5, cis-mer-[Rh(H)₂F(PEt₃)₃] (6) and cis-fac-[Rh(H)₂F(PEt₃)₃] (7) are obtained. Treatment of 5 with HCl in ether effects the generation of [RhCl(PEt₃)₃] (8) and the bifluoride compound [Rh(FHF)(PEt₃)₃] (9), which can be converted into 5 in the presence of Et₃N and Cs₂CO₃. Treatment of 5 with HSiR₂Ph (R=Ph, Me) leads to the formation of 3 and the rhodium(III) silyl complexes fac-[Rh(H)₂(SiR₂Ph)(PEt₃)₃] (10: R=Ph, 11: R=Me).