Trinucleon cluster structure at high-excitation energies in A=6 nuclei

Trinucleon molecular structures in ⁶He and ⁶Be were investigated by using the ⁶Li(⁷Li, ⁷Be)⁶He reaction at 455 MeV and ⁶Li(³He, t)⁶Be reaction at 450 MeV, respectively. Binary decays into t + t from a broad state at E _x =18.0±1.0 MeV in ⁶He and into ³He + ³He from one at E _x =18.0±1.2 MeV in ⁶Be, respectively, were observed by measuring trinucleon cluster decays in coincidence with reaction particles. The branching ratios for binary decay were estimated to be about 0.7 for ⁶He and ⁶Be. These large branching ratios show that a trinucleon cluster state exists as an isobaric partner around E _x =18 MeV in ⁶He and ⁶Be.     

Magnetization and Specific Heat of UCo0.95T0.05Al (T = Fe, Ni) Single Crystals

We present the first single-crystal study of Fe and Ni doped U(Co_1-x T _x )Al compounds in comparison to the parent compound, the itinerant 5f-electron metamagnet UCoAl. Magnetization and specific-heat data measured in the temperature range of (1.8-300) K and in fields up to 10 T are analyzed and discussed. Both compounds exhibit a strong uniaxial anisotropy with the dominating magnetic response along the c-axis of the hexagonal ZrNiAl-type structure. Ni substitution yields an increase of the critical field for metamagnetism; UCo_0.95Fe_0.05Al is ferromagnetic below 30 K. Temperature evolution of the entropy change between 0 and 10 T points to involvement of magnetic correlations or spin fluctuations in the paramagnetic compounds UCoAl and UCo_0.95Ni_0.05Al.     

Agents for the treatment of overactive detrusor. II. Synthesis and inhibitory activity on detrusor contraction of 1,1'-biphenyl-2,6-dicarboxylic acid diesters with an aminoalkyl group in the ester function.

A series of 1,1'-biphenyl-2,6-dicarboxylic acid diesters with an aminoalkyl group in the ester function were synthesized and examined for their inhibitory activity on detrusor contraction in vitro and in vivo. In the in vivo test, arrhythmia was observed as a side effect. Among those compounds synthesized, 2-methyl 6-[4-(1-methylpiperidinyl)] 3-hydroxy-5-methyl-2'-nitro-1,1'-biphenyl-2,6-dicarboxylate (18) showed strong inhibitory activity on detrusor contractions in vivo (ED50 = 0.54 mg/kg i.v., ED50 = 7.2mg/kg i.d.) and good separation from the side effect. Compound 18 was chosen for further pharmacological evaluation as an agent for the treatment of overactive detrusor.     

Anodic behavior of nickel-based alloys in the electrolytic production of NF3

The Ni-based alloys, such as Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si, prepared by hot isostatic pressing (HIP) at 1000 °C under 2 × 10⁸ Pa for 2 h were employed as the anodes for electrolytic production of NF₃. The current efficiencies for NF₃ formation were 42-38, 52-40, 52-47, 63-62, 50 and 41% for Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloys, respectively. The current efficiencies only on Ni-Cu alloys with Cu concentrations lower than 10 mol% were almost the same as those on Ni sheet and HIPed Ni anodes, whereas those on the other alloys used in this study were smaller compared with those on both Ni anodes. On the other hand, the current losses caused by anodic dissolution of Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloy electrodes were 7.95-4.42, 6.40-7.02, 5.60-6.30, 3.34-6.33, 5.10 and 0.18%, respectively. The anode consumptions of Ni-5 mol% Cu and Ni-5 mol% Si alloys were almost the same or smaller compared with those of Ni sheet and HIPed Ni electrodes, though those of other alloys used were large compared with those of both Ni anodes. Consequently, addition of Cu to the nickel matrix is available for a cheaper cost of anode with keeping a same current efficiency as that on the Ni anode and addition of Si to the nickel matrix is effective for decreasing anode consumption largely. A Ni sheet electrode containing a trace of impurities, such as Co, Mn, Ag and Al, is also favorable as the anode for electrolytic production of NF₃.     

Control of light pulse propagation with only a few cold atoms in a high-finesse microcavity

Propagation of a light pulse through a high-Q optical microcavity containing a few cold atoms (N<10) in its cavity mode is investigated experimentally. With less than ten cold rubidium atoms launched into an optical microcavity, up to 170 ns propagation lead time ("superluminal"), and 440 ns propagation delay time (subluminal) are observed. Comparison of the experimental data with numerical simulations as well as future experiments are discussed.     

Evolution of magnetism in U(Ni 1- xPd x) Si single crystals

Single crystals of U(Ni_1-xPd_x)₂Si₂ with x = 0.05, 0.09 and 0.135 have been grown. Magnetization and electrical resistivity measurements were performed in a wide range of temperatures and magnetic fields in order to study stability of magnetic phases in the solid solutions between UNi₂Si₂ and UPd₂Si₂ with a special emphasis on the type of ground state. In UPd₂Si₂ the simple AFI-type antiferromagnetic structure of U moments is observed at low temperatures. UNi₂Si₂ adopts the uncompensated AF structure (UAF) with the + + - stacking of U moments along the c-axis and consequently this compound exhibits a spontaneous magnetization corresponding to 1/3 of the U moment. The substitution of Pd for Ni leads to a rapid decay of the spontaneous magnetization. The evolution of magnetization and electrical resistivity behavior with Pd doping is tentatively attributed to the coexistence of the AF-I and UAF phases in the ground state of U(Ni_0.91Pd_0.09)₂Si₂ and U(Ni_0.865Pd_0.135)₂Si₂. In this scenario, the volume fraction of the AF-I phase rapidly grows with Pd doping on account of the UAF. At lowest temperatures an irreversible transition to the UAF phase is observed when a sufficiently high magnetic field is applied along the c-axis. Received 28 March 2002 / Received in final form 8 August 2002 Published online 19 December 2002 RID="a" ID="a"e-mail: sech@mag.mff.cuni.cz     

Magnetic properties of the rare-earth diborodicarbides (RB2C2)

The magnetic susceptibility of RB₂C₂ has been measured in the temperature range of 3–300 K. Curie-Weiss fits to the susceptibilities led to effective moments in agreement with those expected for R³⁺ ions. The RB₂C₂ (R = Ce, Nd, Sm, Gd, Tb, Er, and Tm) compounds are antiferromagnetic. Metamagnetic transitions at low fields were observed for CeB₂C₂ and TbB₂C₂. The compounds, DyB₂C₂ and HoB₂C₂, are ferromagnets with complex magnetic structures. Praseodymium borocarbide becomes a Van Vleck paramagnet at low temperature. The magnetic ordering temperatures of these compounds are discussed in terms of their crystal structure and the RKKY theory.     

Synthesis and fluorescence properties of difluoro[amidopyrazinato-O,N]boron derivatives: a new boron-containing fluorophore

New boron-containing fluorophores, difluoro[amidopyrazinato-O,N]boron (APB) derivatives, were prepared from amidopyrazines. The fluorescence properties of APB were successfully modulated by an aryl substitution at the C8 position.     

Synthesis and properties of bis(pyrazino[2′,3′:4,5]imidazole)-fused 1,2,5,6-tetrahydro-1,4,5,8,9,10-hexaazaanthracenes: a new fluorescent nitrogen-rich heterocycle

Nitrogen-rich heterocycles, bis(pyrazino[2′,3′:4,5]imidazole)-fused 1,2,5,6-tetrahydro-1,4,5,8,9,10-hexaazaanthracenes (BPI-HAAs) were prepared by conventional Pd(OAc)₂/BINAP-catalyzed C-N coupling reactions of 5-aryl-3-bromoaminopyrazines. The BPI-HAA core is a planar structure with aromaticity, and this heterocycle exhibits red fluorescence and moderate electron-accepting characteristics.