聚合物微晶尺寸和晶格畸变

聚合物微晶尺寸和晶格畸变是对聚合物材料性能有着重要影响的结构参数。本文介绍了应用Ｘ射线衍射方法测定聚合物微晶尺寸和结构畸变的几种方法：近似函数、次晶模型法、方差法、矩法。     

热处理对Nylon—11结构的影响

对不同温度热处理过的Nylon－11样品，采用广角X射线衍射（WAXD），根据X射线衍射强度理论，用多重峰图解分峰方法研究了Nylon－11结构的变化，并导出了计算Nylon－11结晶度的公式．所得结果与密度法、DSC法进行了比较．同时也给出了Nylon－11的有关热力学参数，     

旁侧序列对端粒DNA G-quadruplex热稳定性和折叠与去折叠动力学的影响

从热力学和动力学两个方面研究了旁侧序列对人端粒核心序列G3（T2AG3）3在钠离子溶液中所形成的Cr-quadruplex结构的影响．紫外吸收熔解实验表明G3（T2AG3）3一侧或两侧加上6个胸腺嘧啶核苷酸序列（T6）会明显降低G-quadruplex的相变温度（Tm）．在3′端加上T6时Tm降低约5℃，在5′端加上T6时Tm降低约10℃，两侧同时加上T6时L降低16℃．采用表面等离子体共振（surface plasmon resonance，SPR）测定G-quadruplex折叠和去折叠动力学的结果表明旁侧序列的加入同时降低了折叠和去折叠的速率常数（kf，ku），使折叠平衡常数（KF）由9．01降至7．44．上述结果表明旁侧序列的存在降低了G-quadruplex结构的稳定性．     

Highly sensitive detection of S-nitrosylated proteins by capillary gel electrophoresis with laser induced fluorescence

S-nitrosylated proteins are biomarkers of oxidative damage in aging and Alzheimer's disease (AD). Here, we report a new method for detecting and quantifying nitrosylated proteins by capillary gel electrophoresis with laser induced fluorescence detection (CGE-LIF). Dylight 488 maleimide was used to specifically label thiol group (SH) after switching the S-nitrosothiol (S-NO) to SH in cysteine using the "fluorescence switch" assay. In vitro nitrosylation model-BSA subjected to S-nitrosoglutathione (GSNO) optimized the labeling reactions and characterized the response of the LIF detector. The method proves to be highly sensitive, detecting 1.3 picomolar (pM) concentration of nitrosothiols in nanograms of proteins, which is the lowest limit of detection of nitrosothiols reported to date. We further demonstrated the direct application of this method in monitoring protein nitrosylation damage in MQ mediated human colon adenocarcinoma cells. The nitrosothiol amounts in MQ treated and untreated cells are 14.8±0.2 and 10.4±0.5 pmol/mg of proteins, respectively. We also depicted nitrosylated protein electrophoretic profiles of brain cerebrum of 5-month-old AD transgenic (Tg) mice model. In Tg mice brain, 15.5±0.4 pmol of nitrosothiols/mg of proteins was quantified while wild type contained 11.7±0.3 pmol/mg proteins. The methodology is validated to quantify low levels of S-nitrosylated protein in complex protein mixtures from both physiological and pathological conditions.     

Access to 1,2,3-triazole-fused isoindolines via an unexpected Lewis acid catalyzed cyclization reaction

An unexpected cyclization reaction of N-sulfonyl 1,2,3-triazoles carrying the electron-deficient alkenes with amines under the catalysis of Lewis acid has been accomplished. This strategy involves the removal of the sulfonyl group and further intramolecular 1,4-addition, providing a series of 1,2,3-triazole-fused isoindoline compounds in good yields under the mild conditions.     

Modification of Potassium Chabazites Derived from Fly Ash by Dosing Extra Cations: Promoted CO2 Adsorption Capacities and Fine‐Tuned Frameworks

Potassium chabazite (K‐CHA), a typical microporous zeolite with excellent CO₂ separating properties, was synthesized with waste fly ash and modified via cation dosing treatments using cesium and zinc cations, respectively. The resulting CHAs were analyzed by XRF, XRD, FT‐IR, SEM, and N₂ physisorption, whose CO₂ adsorption properties were then tested on the reorganized TGA apparatus. It showed from XRF data that cesium and zinc cations were successfully imported in the original K‐CHA by cation dosing, but the CHA microstructures and morphologies of K‐CHA were perfectly retained as confirmed by XRD, FT‐IR, SEM and N₂ physisorption. Since there were still over 9 potassium cations per unit cell in cation dosed Cs‐CHA and Zn‐CHA, they both maintained the favored properties of K‐CHA as “molecular trapdoors”. In the following adsorption experiments, the CO₂ uptakes of Cs‐CHA and Zn‐CHA at 333 K and 1 bar, compared with K‐CHA, elevated from 1.70 mmol · g^–1 to 2.34 and 2.03 mmol · g^–1, and the import of zinc cation also presented a positive effect on the adsorption kinetics. Detailed comparisons suggested modifications with cesium and zinc cations fine‐tune the CHA complying with different mechanisms, and CHAs modified via cation perform more approvingly than fully ion‐exchanged ones, providing us important insights into CHA modifications and applications in practice.     

A Photo- and Thermo-Driven Azoarene-Based Circularly Polarized Luminescence Molecular Switch in a Liquid Crystal Host

The development of chiral optical active materials with switchable circularly polarized luminescence (CPL) signals remains a challenge. Here an azoarene-based circularly polarized luminescence molecular switch, (S, R, S)-switch 1 and (R, R, R)-switch 2 , are designed and prepared with an (R)-binaphthyl azo group as a chiral photosensitive moiety and two (S)- or (R)-binaphthyl fluorescent molecules with opposite or the same handedness as chiral fluorescent moieties. Both switches exhibit reversible trans/cis isomerization when irradiated by 365 nm UV light and 520 nm green light in solvent and liquid crystal (LC) media. In contrast with the control (R, R, R)-switch 2 , when switch 1 is doped into nematic LCs, polarization inversion and switching-off of the CPL signals are achieved in the resultant helical superstructure upon irradiation with 365 nm UV and 520 nm green light, respectively. Meanwhile, the fluorescence intensity of the system is basically unchanged during this switching process. In particular, these variations of the CPL signals could be recovered after heating, realizing the true sense of CPL reversible switching. Taking advantage of the unique CPL switching, the proof-of-concept for “a dual-optical information encryption system” based on the above CPL active material is demonstrated.     

Statistical morphological identification of low-dimensional nanomaterials by using TEM

Nanomaterials with low-dimensional morphology display unique properties in catalysis and related fields,which are highly dependent on the structure and aspect r...     

Periodicities in Cluster Algebras and Cluster Automorphism Groups

We study the relations between two groups related to cluster automorphism groups which are defined by Assem,Schiffler and Shamchenko.We establish the relation-ships among (strict) direct cluster automorphism groups and those groups consisting of periodicities of labeled seeds and exchange matrices,respectively,in the language of short exact sequences.As an application,we characterize automorphism-finite cluster algebras in the cases of bipartite seeds or finite mutation type.Finally,we study the relation between the group Aut(A) for a cluster algebra A and the group AutMn(S) for a mutation group Mn and a labeled mutation class S,and we give a negative answer via counter-examples to King and Pressland's problem.     

Photoluminescent nematic liquid crystalline elastomer actuators

Nematic liquid crystalline elastomer (LCE) actuators possessing both photoluminescent (PL) and stimuli-responsive functions were fabricated and studied. PL-dyes (1-pyrenemethyl acrylate and 4-bromo-2,6-bis-(1?-methyl-benzimidazolyl) pyridine loaded with Eu(III) ion) were synthesised and characterised, and then the dyes were mixed with an acrylate side-on liquid crystalline monomer, a cross-linker and a photo-initiator. Through magnetic field alignment, well-defined LCE micropillar PL actuators were fabricated from the mixed samples by a method combining soft lithography and photo-polymerisation/photo-cross-linking. Microscopic observations indicated that the LCE micropillars showed reversible thermomechanical deformation at the nematic-to-isotropic transition temperature. During the reversible contraction and extension process, the LCE actuator containing 1-pyrenemethyl moieties showed stable photoluminescence, while for the LCE actuator doped with 4-bromo-2,6-bis-(1-methyl-benzimidazolyl)pyridine/Eu(III) complex, the PL emission was quenched at about 100°C, which was before the pillars contraction occurring at a higher temperature. When cooled down to room temperature, the contracted LCE micropillars recovered their original shape and the initial PL emission state. The micron-sized LCE actuators can be used for thermomechanical devices and machines with different PL functions at the same time.