The effect of drying method on the properties and nanoscale structure of cellulose whiskers

Cellulose whiskers were prepared from wood- and cotton-based microcrystalline cellulose and dried by two methods: freeze-drying or air-drying. The effect of drying method on the properties and structure of the whiskers were studied. Furthermore, the influence of the source of cellulose on the nanoscale structure was investigated. Drying method was observed to slightly influence the thermal stability of cellulose whiskers, whereas the char residue varied significantly depending on the drying process performed. Small- and wide-angle X-ray scattering and solid state nuclear magnetic resonance spectroscopy were used to examine the crystallinity and nanoscale structure of the dried whiskers. It was observed that the crystal structure and crystallinity of cellulose whiskers remained during all treatments, whereas their nanoscale structure was significantly influenced by drying method, neutralization, and source of cellulose. Relationships between thermal behavior and nanoscale structure were reported and discussed.     

Characterization of ARC/CL wheat flour and potato powder reference materials for content of total dietary fiber

Summary ARC/CL wheat flour and potato powder reference materials (RMs) prepared by the Central Laboratory of the Agricultural Research Centre of Finland, earlier specified for contents of essential and toxic trace elements, were characterized for contents of total dietary fiber (TDF). Recommended concentration values established were obtained on the basis of an interlaboratory comparison study conducted involving 10 reference laboratories recognized for their reliability in TDF determinations. The recommended TDF contents established were based on an enzymatic-gravimetric method employed by the participating laboratories to determine TDF or water insoluble (WIS) and water soluble (WS) DF which were then added up to obtain TDF. After exclusion of outliers the recommended concentration values were expressed as the medians ±95% confidence limits of the average values by the participating laboratories. The coefficient of variation obtained for the recommended concentration range of TDF was within 7% for both RMs.     

Cellulose crystallinity and ordering of hemicelluloses in pine and birch pulps as revealed by solid-state NMR spectroscopic methods

Solid-state ¹³C NMR spectroscopy was used to determine the degree of cellulose crystallinity (CrI) in kraft, flow-through kraft and polysulphide–anthraquinone (PS–AQ) pulps of pine and birch containing various amounts of hemicelluloses. The applicability of acid hydrolysis and the purely spectroscopic proton spin-relaxation based spectral edition (PSRE) method to remove the interfering hemicellulose signals prior to the determination of CrI were also compared. For softwood pulps, the spectroscopic removal of hemicelluloses by PSRE was found to be more efficient than the removal of hemicelluloses by acid hydrolysis. In addition to that, the PSRE method also provides information on the associations between cellulose and hemicelluloses. On the basis of the incomplete removal of xylan from the cellulose subspectra by PSRE, the deposition of xylan on cellulose fibrils and therefore an ordered ultrastructure of xylan in birch pulps was suggested. The ordered structure of xylan in birch pulps was also supported by the observed change of xylan conformation after regeneration. Similarly, glucomannan in pine pulps may have an ordered structure. According to the ¹³C CPMAS measurements conducted after acid hydrolysis, the degree of cellulose crystallinity was found to be slightly lower in birch pulps than in the pine pulps. Any significant differences in cellulose crystallinity were not found between the pulps obtained by the various pulping methods. Only in pine PS–AQ pulp, the degree of cellulose crystallinity may be slightly lower than in the kraft pulps containing less hemicelluloses.     

Water sorption and diffusion coefficients of protons and water in PVDF-g-PSSA polymer electrolyte membranes

Water sorption properties, proton NMR spectra, and diffusion of water and protons in poly(vinylidene fluoride)-graft-polystyrene sulfonic acid (PVDF-g-PSSA) polymer electrolyte membranes were studied. Sorption curves for the membranes with different degrees of grafting in protonated and Na⁺ form were measured by equilibrating the membranes over saturated salt solutions. The membrane water content was found to be sensitive to changes in relative humidity (RH). The water/sulfonic acid ratio λ for the protonated samples was around 2 at 20% RH and increased to λ ∼ 30 at 100%. Proton NMR, pulsed field gradient proton NMR (PFG-NMR), and impedance measurements were made on membranes with different λ. In the proton NMR spectra only one peak was found, originating from the water in the membrane. The chemical shift of the peak was found to be dependent on the counterion and the water content. The water self-diffusion coefficients D_H2O, measured by PFG-NMR, increased with degree of grafting and water content of the membranes. The proton conductivity and the calculated proton mobility decreased more steeply than the D_H2O with decreasing water content. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2893–2900, 1999     

Upconverting nanophosphors as reporters in a highly sensitive heterogeneous immunoassay for cardiac troponin I

Photon upconverting nanophosphors (UCNPs) have a unique capability to produce anti-Stokes emission at visible wavelengths via sequential multiphoton absorption upon infrared excitation. Since the anti-Stokes emission can be easily spectrally resolved from the Stokes' shifted autofluorescence, the upconversion luminescence (UCL) is a highly attractive reporter technology for optical biosensors and biomolecular binding assays – potentially enabling unprecedented sensitivity in separation-based solid-phase immunoassays.     

Effect of catalyst systems and reaction conditions on the synthesis of cellulose‐g‐PDMAam copolymers by controlled radical polymerization

Various copper‐based catalyst systems and reaction conditions were studied in the graft copolymerization of N,N‐dimethylacrylamide (DMAam) with a cellulose‐based macroinitiator by controlled radical polymerization. The cellulose macroinitiator with degree of substitution DS = 0.44 was synthesized from dissolving softwood pulp in a LiCl/DMAc solution. The graft copolymerizations of DMAam, using the cellulose macroinitiator and various copper‐based catalyst systems, were then carried out in DMSO solutions. The copolymerization kinetics was followed by ¹H NMR. Water‐soluble cellulose‐g‐PDMAam copolymers were comprehensively characterized by ATR‐FTIR and ¹H NMR spectroscopies and SEC analyses. DLS and steady‐shear viscosity measurements revealed that when the DP_graft of the cellulose‐g‐PDMAam copolymer is high enough, the copolymer forms a more compact structure in water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Enantioselective synthesis of erythro-4-deoxyglycals as scaffolds for target- and diversity-oriented synthesis: new insights into glycal reactivity

An efficient, enantioselective synthesis of erythro-4-deoxyglycals has been developed using asymmetric aldehyde allylation and tungsten-catalyzed alkynol endo-cycloisomerization as the key steps. These versatile synthetic scaffolds have been elaborated to a variety of products using stereoselective transformations that are complementary to those available using the corresponding threo glycals. This work has provided valuable insights into the relationships between glycal structure and reactivity. In addition, a new diene-forming side reaction during tungsten-catalyzed alkynol cycloisomerization has been discovered.     

Preparation and characterization for mineral elements and total dietary fiber and testing for stability of β-carotene of an ARC/CL carrot powder multipurpose candidate reference material

As part of the analytical assurance system of the FAO European Cooperative Research Network on Trace Elements programme an ARC/CL-coded carrot flakes powder (CFP) candidate reference material (RM) has been prepared from a lot of commercial carrot flakes. The candidate RM has been homogenized using a Robot Coupe blender fitted with titanium blades, carefully homogenized in large teflon/polypropylene containers, bottled in 1000 numbered polyethylene containers (20 g samples) and tested for homogeneity. Interlaboratory comparison studies for 9 essential elements, cadmium and total dietary fiber (TDF) based on the AOAC-method resulted in the characterization of the contents of those compounds in the above material. After exclusion of outliers, mean values from at least nine different laboratories based altogether on three independent analytical principles have been used to calculate the recommended concentration ranges for mineral elements. Testing of homogeneity and stability for β-carotene over a period of one year has been additionally carried out. The mean water content in the material amounted to 4.97% and remained stable over a one-year period. Homogeneity of the RM was within 3.0% for almost all included mineral elements as tested for a sample size of 0.5 g. The 95% confidence limits for the mean values of the established recommended concentrations of mineral elements in the present ARC/CL Carrot Powder candidate RM fell within 5% for all the other elements and TDF except for Fe (6.3%) and B (5.7%). The stability of β-carotene in the present candidate RM stored in darkness over a one-year period at room temperature was within 6.3%.     

Polystyrene latex particles coated with crosslinked poly(N-isopropylacrylamide)

Thermoresponsive colloidal particles were prepared by seeded precipitation polymerization of N-isopropylacrylamide (NIPAM) in the presence of a crosslinking monomer, N,N-methylenebisacrylamide (MBA), using polystyrene latex particles (ca. 50 nm in diameter) as seeds in aqueous dispersion. Phase transitions of the prepared poly(N-isopropylacrylamide), PNIPAM, shells on polystyrene cores were studied in comparison to colloidal PNIPAM microgel particles, in H₂O and/or in D₂O by dynamic light scattering, microcalorimetry and by ¹H NMR spectroscopy including the measurements of spin–lattice (T1) and spin–spin (T2) relaxation times for the protons of PNIPAM. As expected, the seed particles grew in hydrodynamic size during the crosslinking polymerization of NIPAM, and a larger NIPAM to seed mass ratio in the polymerization batch led to a larger increase of particle size indicating a product coated with a thicker PNIPAM shell. Broader microcalorimetric endotherms of dehydration were observed for crosslinked PNIPAM on the solid cores compared to the PNIPAM microgels and also an increase of the transition temperature was observed. The calorimetric results were complemented by the NMR spectroscopy data of the ¹H-signal intensities upon heating in D₂O, showing that the phase transition of crosslinked PNIPAM on polystyrene core shifts towards higher temperatures when compared to the microgels, and also that the temperature range of the transition is broader.     

Stereocontrolled synthesis of spiroketals via a remarkable methanol-induced kinetic spirocyclization reaction

A methanol-induced kinetic spiroketalization reaction has been developed for the stereocontrolled target- and diversity-oriented synthesis of spiroketals. In contrast to existing methods for spiroketal synthesis, this reaction does not depend on thermodynamic product stability or require axial attack of an oxygen nucleophile. Stereodiverse glycals are alkylated at the C1 position with side chains bearing protected hydroxyl groups. After alcohol deprotection, the glycal is epoxidized stereoselectively, then the side chain hydroxyl is spirocyclized with inversion of configuration at the anomeric carbon by addition of excess MeOH at -63 degrees C. This spirocyclization reaction appears to proceed by MeOH hydrogen-bonding catalysis and has been used to form five- and six-membered rings with stereoisomeric substituents. In some cases, the stereocomplementary spiroketals can be also obtained by classical acid-catalyzed equilibration.