虾肝肠胞虫感染病理特征、18S rRNA基因序列及系统进化树分析

为调查浙江省部分地区虾肝肠胞虫(Enterocytozoon hepatopenaei,EHP)暴发来源及与其他宿主来源的微孢子虫进化关系,本研究利用形态学特征和分子鉴定,尝试对引起浙江多地凡纳对虾生长缓慢综合征的病原进行探究.同时基于18S rRNA基因序列分析该病原与其他地区及其他宿主来源微孢子虫的进化关系.结果显...     

新型荧光分子印迹膜特异性识别和检测目标蛋白质

制备了一种新型荧光分子印迹膜(L-半胱氨酸修饰的量子点嵌入的分子印迹膜(QDs@MIM)),并将其作为荧光人工受体用于目标蛋白质(溶菌酶)的特异性识别和检测。QDs@MIM以溶菌酶为模板分子、丙烯酰胺为功能单体、L-半胱氨酸修饰的量子点为辅助单体、N,N′-亚甲基双丙烯酰胺为交联剂,在预硅烷化的玻璃板上制备而成。在最佳条件下,QDs@MIM对溶菌酶检测的线性范围为0.1~1.0μmol/L,吸附平衡时间为4 min,选择性因子为6.2。该方法操作简单、吸附平衡时间短、选择性高,具备作为生物传感器快速分析样品中目标蛋白质的潜力。     

Semi-implicit Skew Upwind Method for problems in environmental hydraulics

A new computational method is presented for reducing numerical diffusion in environmental fluid problems. This method, which is referred to as the Semi-Implicit Skew Upwind Method (SISUM), is a robust solution procedure for the conditional convergence of the discretized transport equations. The method retains the advantage of the low numerical diffusion of the conventional skew upwind schemes but does not suffer from over- or under-shooting often found in these methods due to the improved interpolation schemes. The effectiveness of SISUM is demonstrated in several examples. The comparison of the results of a hybrid scheme and SISUM with field observations of convection-dominated pollutant transport in strongly curvilinear river flow shows that SISUM successfully eliminates the high numerical diffusion produced by the hybrid scheme. The robustness of the method was tested by solving the hydrodynamics of a circular clarifier model with a large density gravity source term in the vertical-momentum equation.     

A new strategy for designing non-C2-symmetric monometallic bifunctional catalysts and their application in enantioselective cyanation of aldehydes

A monometallic bifunctional catalyst, in which only one imidazolyl moiety is directly attached at the 3-position of a binaphthol moiety, has been developed. The ligand (R)-1, which lacks C2-symmetry and flexible linkers, in combination with Ti(OiPr)4, has been demonstrated to promote the enantioselective cyanation of aldehydes with trimethylsilylcyanide (TMSCN), giving excellent enantioselectivities of up to 98 % ee and high yields of up to 99 %. The use of this bifunctional catalytic system obviates the need for additives and is extremely simple as the reagents are added in one portion at the beginning of the reaction. The protocol has been found to tolerate a relatively wide range of aldehydes when 10 mol % of the (R)-1/Ti(OiPr)4 complex is deployed in CH2Cl2 at -40 degrees C, the conditions which proved most practical and effective. The asymmetric cyanations also proceeded with lower catalyst loadings (5 mol %, or even 2 mol %), still giving satisfactory enantiomeric excesses and yields. Interestingly, the use of freshly distilled TMSCN dried over CaH2 gave a low enantioselectivity and only a moderate yield of the adduct as compared with direct use of the commercial reagent. The results of 13C NMR spectroscopic studies implicate HCN as the actual reactive nucleophile.     

Uniform persistence and periodic solutions for Kolmogorov system with delays

We consider the general delayed Kolmogorov-type predator–prey system. The uniform persistence and the existence of positive periodic solutions will be studied by using new approaches. Our results improve some in the literatures. Some examples are given to illustrate the obtained results.     

3-羟基克拉霉素和2'-乙酰基-3-氧代克拉霉素的合成与晶体结构

克拉霉素在不同条件下水解,分别生成3-羟基克拉霉素(2)和3-羟基-8,9,10,11-二脱水-9,12-半缩酮克拉霉素(3),用乙酸酐保护2的C(2')-OH得到2'-乙酰基-3-羟基克拉霉素(4),用Ⅳ-氯代琥珀酰亚胺(NCS)氧化4的C(3)-OH合成了2'-乙酰基-3-氧代克拉霉素(5),采用MS,IR,1H NMR,13C NMR等对这些化合物进行了表征.用X射线单晶衍射法测定了化合物2和5的晶体结构,其均属于正交晶系,P212121空间群.化合物2的晶胞参数a=1.3657(3)nm,6=1.4783(3)nm,c=1.6510(3)nm,Z=4,V=3.3332(12)am3,Dc=1.175 g/cm3,F(000)=1288,μ=0.087mm-1;化合物5的晶胞参数a=1.5124(3)nm,b=1.5247(3)nm,c=1.5288(3)nm,Z=4,V=3.5254(12)nm3,Dc=1.187g/cm3,F(000)=1368.0,μ=0.088 mm-1.     

结晶型聚合物注塑过程冷却模型的数值模拟

对HDPE平板状注塑件的冷却过程进行了数值模拟 .基于小分子结晶性物质的冷却模型 ,建立了固相、液相及固液相界面的控制方程 ,方程中引入热焓E和参数T 后 ,将带耦合条件的热传导方程转变为非线性抛物型方程 ,按控制容积法将其离散后 ,用数学软件Matlab获得了PE的三维温度场 ,这为探讨带相转变的热传导问题提供了一种有效的数值方法 .通过对制件芯层温度变化的模拟值与实验值的比较 ,比较了不同相变温度下理论结果的准确性 ,结果表明 ,在引入一定过冷度后 ,将相变温度定义在低于平衡熔点以下时 ,该方法的模拟值具有更好的准确性 .同时 ,模型分析了不同工艺条件对制件芯层冷却过程的影响 ,通过相变平台出现的先后以及终止时间的不同 ,说明充模温度主要影响熔体阶段的冷却以及相变出现的先后 ,而模具温度主要影响固体阶段的冷却以及相变平台终止的先后 .     

双环和多环四唑含能化合物的合成研究进展

综述了近年来双环和多环四唑含能化合物的合成研究进展,包括偶氮四唑、联四唑、双环四唑胺、肼基四唑、硝胺基四唑、硝基四唑、烷基相连的双环四唑、多环四唑等,结合化合物的表征,对双环和多环四唑含能化合物的性质做了阐述,对双环和多环四唑含能化合物的发展做了展望.     

氮化硼纳米片负载Pd(OAc)2催化剂的制备及催化微波辅助Heck反应

以液相超声剥离的氮化硼纳米片(BNNSs)为载体, 通过表面羟基、 氨基、 席夫碱共价功能化后与Pd ²⁺配位, 制备负载型催化剂Pd@BNNSs-Schiff, 并将该催化剂应用于微波辅助的Heck反应. 通过傅里叶红外光谱(FTIR)、 激光拉曼(Raman)光谱、 X射线衍射(XRD)、 同步热分析(TGA)、 X射线光电子能谱(XPS)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)和元素分布分析(EDS mapping)对催化剂的结构和形貌进行了表征. 结果表明, 当苯乙烯与碘苯摩尔比为1.25∶1, 溶剂为N,N-二甲基甲酰胺, 缚酸剂为三乙胺, 催化剂Pd用量为0.08%(质量分数)时, 以450 W功率微波辐射20 min收率最高为95.6%; 催化活性明显优于以相同方法制备的催化剂Pd@GO-Schiff(78.3%)(GO=氧化石墨烯); Pd@BNNSs-Schiff循环利用6次后仍具有较高的催化活性,参照催化剂在循环3次后活性明显降低, 7次后失活.     

5-硝基-2H-四唑的合成、反应性及产物晶体结构的研究

5-氨基四唑(1)经过重氮化反应得到5-硝基四唑(5),5与甲醛反应得到2-羟甲基-5-硝基四唑(6),6与HCl或HBr反应分别得到5-5氯代四唑(7)和5-溴代四唑(8),采用MS,IR,1H NMR,13C NMR等技术对这些化合物进行了表征.用X射线单晶衍射法测定了化合物5-硝基四唑钠(4),5和6的晶体结构.化合物4属于三斜晶系,P-1空间群;化合物5和6均属于单斜晶系,P21空间群,化合物6的晶胞参数a=0.66131(18)nm,b=0.54905(15)nm,c=0.7566(2)nm,Z=2,V=0.27470(13)nm3,Dc=1.754g/cm3,F(000)=128,μ=0.160mm-1.