Structure,morphology, and crystallization process of isotactic polypropylene/hydrogenated hydrocarbon resin blends

The structure, morphology, and isothermal and nonisothermal crystallization of isotactic polypropylene/low‐molecular‐mass hydrocarbon resin blends (iPP/HR) (up to 20% in weight of HR) have been studied, using optical and electron microscopy, wide‐ and small‐angle X‐ray and differential scanning calorimetry. New structures and morphologies can be activated, using appropriate preparation and crystallization conditions and blend composition. For every composition and crystallization condition, iPP crystallizes in α‐form, with a spherulitic morphology. The size of iPP spherulites increases with resin content, whereas the long period decreases. In the range of crystallization temperatures investigated, HR modifies the birefringence of iPP spherulites, favoring the formation of radial lamellae and changing the ratio between tangential and radial lamellae. Spherulitic radial growth rates, overall crystallization rates, and melting temperatures are strongly affected by resin, monotonically decreasing with resin content. This confirms miscibility in the melt between the two components of the blends. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3368–3379, 2004     

Quantitative measurements of Ge surface segregation during SiGe alloy growth

Ge segregation during the growth of Si_{1 − x}Ge_x alloys (x = 5, 10, 20, and 40%) was studied using X-ray photoelectron spectroscopy. The alloys were grown in thicknesses up to 20.0 nm at 500°C to measure quantitatively the amount of segregated surface Ge. The length of alloy needed to reach steady-state growth edge was found to decrease with increasing alloy concentration (4.8, 2.8, 2.4, and 2.0 nm, respectively). It was found that each alloy had a complete monolayer of Ge on the surface and an increasing amount of segregated Ge in the second layer (20, 55, 80, and 95%, respectively) during steady-state growth. An increase in the temperature of alloy growth (400–750°C) resulted in an increase in the leading edge of alloy growth but did not change the amount of segregated Ge during steady-state growth. We propose that film stress is responsible for the amount of Ge segregation.     

Heterocyclic rearrangements. N,N-diphenylhydrazones,oximes and O-methyloximes of 3-benzoyl-5-phenyl-1,2,4-oxadiazole

The behaviour of (E)- and (Z)-N,N-diphenylhydrazones and O-Methyloximes of 3-benzoyl-5-phenyl-1,2,4-oxadiazole has been studied. When refluxed in benzene, or in dioxane-water (1:1), the (Z)-N,N-diphenylhydrazone 8Z gave the indazole 11 or the substituted semicarbazide 12 , respectively. The O-methyloxime 14Z did not give any rearrangement. A criticism of the oximation reaction of 3-benzoyl-5-phenyl-1,2,4-oxadiazole is also reported.     

Bismuth-catalyzed allylic oxidation using t-butyl hydroperoxide

Bismuth(III) salts are efficient catalysts for the selective allylic oxidation using tert-butyl hydroperoxide. BiCl₃ is especially effective and can be easily recovered and reused as BiOCl. Using BiCl₃/K-10 as catalyst, an increase in the reaction rate was observed.     

Traceability in quantitative NMR using an electronic signal as working standard

The choice of the reference, either as internal or external is not straightforward in quantitative NMR. In this context ERETIC™ methodology appears as an universal referencing technique. An electronic signal, generated by the NMR spectrometer during the acquisition time, operates as a virtual working standard. The processes for ensuring a traceability to primary standards is illustrated on the official method devoted to (D/H)_i ratios measurement on ethanol, using quantitative ²H-NMR. The ERETIC approach is shown to be equivalent to its official homologue, in terms of accuracy and precision. Finally, its performance could be beneficial to other analytes, matrices and nuclei.     

Fluorinated heterocyclic compounds. An effective strategy for the synthesis of fluorinated Z-oximes of 3-perfluoroalkyl-6-phenyl-2h-1,2,4-triazin-5-ones via a ring-enlargement reaction of 3-benzoyl-5-perfluoroalkyl-1,2,4-oxadiazoles and hydrazine

The reaction of 3-benzoyl-5-perfluoroalkyl-1,2,4-oxadiazoles with hydrazine has been investigated, evidencing the possibility of competitive reaction paths. Nucleophilic addition of the hydrazine to the electrophilic C(5) of the 1,2,4-oxadiazole ring, followed by ring opening and ring closure with enlargement, leads with high yield and in very mild experimental conditions to the formation of Z-oximes of 3-perfluoroalkyl-6-phenyl-2H-1,2,4-triazin-5-ones (11a-c) as major products of the reaction. In turn, the hydrazine can attack the electrophilic carbonyl carbon giving 4-perfluoroacylamino-5-phenyl-2H-1,2,3-triazoles (13a-c) through the well-known Boulton-Katritzky rearrangement of the intermediate hydrazones.     

On Landis’ Conjecture in the Plane

In this paper we prove a quantitative form of Landis’ conjecture in the plane. Precisely, let W(z) be a measurable real vector-valued function and V(z) ≥0 be a real measurable scalar function, satisfying ‖W‖ _{L ^∞(R ²)} ≤ 1 and ‖V‖ _{L ^∞(R ²)} ≤ 1. Let u be a real solution of Δu ? ?(Wu) ? Vu = 0 in R ². Assume that u(0) = 1 and |u(z)| ≤exp (C ₀|z|). Then u satisfies inf _{|z 0| =R}  sup _{|z?z 0| <1}|u(z)| ≥exp (?CRlog R), where C depends on C ₀. In addition to the case of the whole plane, we also establish a quantitative form of Landis’ conjecture defined in an exterior domain.     

Site-specific C content by quantitative isotopic C Nuclear Magnetic Resonance spectrometry: A pilot inter-laboratory study

Isotopic ¹³C NMR spectrometry, which is able to measure intra-molecular ¹³C composition, is of emerging demand because of the new information provided by the ¹³C site-specific content of a given molecule. A systematic evaluation of instrumental behaviour is of importance to envisage isotopic ¹³C NMR as a routine tool. This paper describes the first collaborative study of intra-molecular ¹³C composition by NMR. The main goals of the ring test were to establish intra- and inter-variability of the spectrometer response. Eight instruments with different configuration were retained for the exercise on the basis of a qualification test. Reproducibility at the natural abundance of isotopic ¹³C NMR was then assessed on vanillin from three different origins associated with specific δ¹³C_i profiles. The standard deviation was, on average, between 0.9 and 1.2‰ for intra-variability. The highest standard deviation for inter-variability was 2.1‰. This is significantly higher than the internal precision but could be considered good in respect of a first ring test on a new analytical method. The standard deviation of δ¹³C_i in vanillin was not homogeneous over the eight carbons, with no trend either for the carbon position or for the configuration of the spectrometer. However, since the repeatability for each instrument was satisfactory, correction factors for each carbon in vanillin could be calculated to harmonize the results.