Rohrleitungen aus Glas

Ohne ZusammenfassungDer Text erscheint ausführlich in Die Chemische Fabrik, 1938, Heft 49/50. — Dieser Vortrag trat an die Stelle des von Dr. G. Schott angemeldeten Vortrages: Technische Anwendung von Jenaer Glas in der chemischen Industrie.     

Laser-microprobe elemental determinations with an optical multichannel detection system

The results obtained when a laser microprobe is adapted to imaging detectors for multiwavelength detection are described. Detectors evaluated are a silicon-intensified target vidicon and a second-generation photodiode array. Data are presented to illustrate how the combined system can be used to monitor both surface and depth profiles of elemental content of a variety of sample types including a ruby rod and ceramic material with blemishes, electrical capacitors, integrated circuits, and surface-coated electrical conductors. It is also shown how the gating capability of the intensified vidicon can be used to monitor time-dependent changes in the several nanosecond range during the laser microprobe excitation process. Detection limits obtained with both detectors are in the range 2–500 ppm depending on the element, the wavelength used, the matrix, and other variables. The uncertainty associated with the measurement step can be improved by a factor of 2–3 by using ratios of spectral lines. Principal limitations of the laser microprobe method are the nonlinear response of intensity vs. concentration and the resulting need for reference materials with matrices similar to samples for calibration purposes.     

A measuring system for the fast simultaneous isotope ratio and elemental analysis of carbon, hydrogen, nitrogen and sulfur in food commodities and other biological material

The isotope ratio of each of the light elements preserves individual information on the origin and history of organic natural compounds. Therefore, a multi-element isotope ratio analysis is the most efficient means for the origin and authenticity assignment of food, and also for the solution of various problems in ecology, archaeology and criminology. Due to the extraordinary relative abundances of the elements hydrogen, carbon, nitrogen and sulfur in some biological material and to the need for individual sample preparations for H and S, their isotope ratio determination currently requires at least three independent procedures and approximately 1 h of work. We present here a system for the integrated elemental and isotope ratio analysis of all four elements in one sample within 20 min. The system consists of an elemental analyser coupled to an isotope ratio mass spectrometer with an inlet system for four reference gases (N(2), CO(2), H(2) and SO(2)). The combustion gases are separated by reversible adsorption and determined by a thermoconductivity detector; H(2)O is reduced to H(2). The analyser is able to combust samples with up to 100 mg of organic material, sufficient to analyse samples with even unusual elemental ratios, in one run. A comparison of the isotope ratios of samples of water, fruit juices, cheese and ethanol from wine, analysed by the four-element analyser and by classical methods and systems, respectively, yielded excellent agreements. The sensitivity of the device for the isotope ratio measurement of C and N corresponds to that of other systems. It is less by a factor of four for H and by a factor of two for S, and the error ranges are identical to those of other systems.     

Essential methodological improvements in the oxygen isotope ratio analysis of N‐containing organic compounds

The quantitative conversion of organically bound oxygen into CO, a prerequisite for the ¹⁸O/¹⁶O analysis of organic compounds, is generally performed by high‐temperature conversion in the presence of carbon at ～1450°C. Since this high‐temperature procedure demands complicated and expensive equipment, a lower temperature method that could be utilized on standard elemental analyzers was evaluated. By substituting glassy carbon with carbon black, the conversion temperature could be reduced to 1170°C. However, regardless of the temperature, N‐containing compounds yielded incorrect results, despite quantitative conversion of the bound oxygen into CO. We believe that the problems were partially caused by interfering gases produced by a secondary decomposition of N‐ and C‐containing polymers formed during the decomposition of the analyte. In order to overcome the interference, we replaced the gas chromatographic (GC) separation of CO and N₂ by reversible CO adsorption, yielding the possibility of collecting and purifying the CO more efficiently. After CO collection, the interfering gases were vented by means of a specific stream diverter, thus preventing them from entering the trap and the mass spectrometer. Simultaneously, a make‐up He flow was used to purge the gas‐specific trap before the desorption of the CO and its subsequent mass spectrometric analysis. Furthermore, the formation of interfering gases was reduced by the use of polyethylene as an additive for analytes with a N:O ratio greater than 1. These methodological modifications to the thermal conversion of N‐containing analytes, depending on their structure or O:N ratio, led to satisfactory results and showed that it was possible to optimize the conditions for their individual oxygen isotope ratio analysis, even at 1170°C. With these methodological modifications, correct and precise δ¹⁸O results were obtained on N‐containing analytes even at 1170°C. Differences from the expected standard values were below ±1‰ with standard deviations of the analysis <0.2‰. Copyright © 2010 John Wiley & Sons, Ltd.     

Electronic excitations during grazing scattering of hydrogen atoms on KI(001) and LiF(001) surfaces

The energy loss of hydrogen atoms with energies of 400 eV and 1 keV is studied in coincidence with the number of emitted electrons during grazing scattering from atomically clean and flat KI(001) and LiF(001) surfaces. The energy loss spectra for specific numbers of emitted electrons are analyzed in terms of a binary interaction model based on the formation of transient negative ions via local capture of valence band electrons from anion sites. Based on computer simulations we derive for this interaction scenario probabilities for the production of surface excitons, for electron loss to the conduction band of KI, for emission of electrons, and for formation of negative hydrogen ions. The pronounced differences of data obtained for the two surfaces are attributed to the different electronic structures of KI and LiF.     

14.5GHz紧凑型、低成本、全永磁ECR离子源

A compact 14.5GHz electron cyclotron resonance (ECR) ion source for the production of slow, multiply charged ions has been constructed,with the plasma-confining magnetic field produced exclusively by permanent magnets.Microwave power of up to 175W in the frequency range from 12.75 to 14.SGHz is transmitted from ground potential via a PTFE window into the water-cooled plasma chamber which can be equipped with an aluminum liner.The waveguide coupling system serves also as biased electrode,and two remotely-controlled gas inlet valves connected via an insulating break permit plasma operation in the gas- mixing mode.A triode extraction system sustains ion acceleration voltages between 1kV and 10kV.The ECR ion source is fully computer-controlled and can be remotely operated from any desired location via Ethernet.     

Papierchromatographische charakterisierung von haschisch-inhaltsstoffen

The hashish-components cannabidiol, cannabinol and tetrahydrocannabinol have been separated by chromatography using paper impregnated with silicon resin. The spots can be identified by combined application of spray reagents. This new method allows an exact identification of the euphorically active cyclic ether “tetrahydrocannabinol” and appears to be suitable to replace physiological tests.     

An Improved Method for Calculating Zeta-Potentials from Measurements of the Electrokinetic Sonic Amplitude

The surface electric properties of the commercially available silica, Monospher 1000 (Fa. Merck), have been studied by conductivity and ESA (electrokinetic sonic amplitude) experiments. It could be shown that accounting for the contribution of the stagnant layer to surface conductivity is indispensable in the interpretation of electrokinetic data at low ionic strength. A general method has been put forward which allows to take into account the total, experimentally accessible surface conductivity in the evaluation of ESA data of moderately concentrated suspensions. This includes additional conductivity measurements which serve for the independent estimation of the total relative surface conductivity. The resulting zeta-potentials are clearly higher than those obtained after neglecting the contribution of the stagnant layer to surface conductivity. In addition, the ionic mobilities of potassium and magnesium in the hydrodynamically stagnant layer have been investigated in some detail. It has been found that the ionic mobility of potassium is of the same order of magnitude as in the bulk solution while the mobility of magnesium is significantly reduced. Copyright 2000 Academic Press.